journal article·2024-07-26

Experimental study on EDM of network microstructure titanium matrix composites

Yizhou Hu, Leheng Zhang, Zhenlong Wang

Publisher page

Abstract

The network microstructure titanium matrix composites (NMTMCs) exhibit excellent properties but research on its machining remains limited. In this paper, single and continuous pulse electrical discharge machining (EDM) experiments were conducted on the NMTMCs composed of Ti6Al4V matrix combined with 5% vol. network distributed TiB whisker (TiBw). The impact of TiBw on EDM was analyzed in comparison to the machining results of pure Ti6Al4V. The results indicate that the TiBw reinforcements absorbs pulse energy during the machining process, resulting in smaller areas and more complex morphologies for the EDM craters. Based on this, a linear absorption model for pulse energy by reinforcement strips is proposed. Furthermore, in continuous pulse EDM with low capacitance settings, the presence of TiBw tends to generate micro pores on the surface and reduce material removal rate (MRR). However, when using higher capacitance settings, MRR for NMTMCs can surpass that achieved for pure Ti6Al4V.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Machining and Optimization Techniques · Advanced machining processes and optimization · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechatronics Engineering, Harbin Institute of Technology, Harbin, Heilongjiang, China

Key Laboratory of Micro-systems and Micro-structures Manufacturing of Ministry of Education, Harbin Institute of Technology, Harbin, Heilongjiang, China

Funding

National Nature Science Foundation of China

References (42)

Show source-provided references
1. 10.1002/adem.20220100210.1002/adem.202201002 ↗
2. 10.1002/adem.20210168910.1002/adem.202101689 ↗
3. 10.1002/admt.20220021910.1002/admt.202200219 ↗
4. 10.1038/srep2256310.1038/srep22563 ↗
5. 10.1038/srep3612610.1038/srep36126 ↗
6. 10.1038/s41598-022-23796-410.1038/s41598-022-23796-4 ↗
7. 10.1038/srep4259810.1038/srep42598 ↗
8. 10.1038/s41598-022-12855-510.1038/s41598-022-12855-5 ↗
9. 10.1002/adem.20220189510.1002/adem.202201895 ↗
10. 10.1002/adma.20200068810.1002/adma.202000688 ↗
11. 10.1016/j.scriptamat.2009.02.03210.1016/j.scriptamat.2009.02.032 ↗
12. 10.1142/S175882511750073910.1142/S1758825117500739 ↗
13. Hu, H. T.; Geng, L.; Huang, L. J.; Li, C. Y. High Temperature Mechanical Properties of 3D Network Structured TiBw/Ti60 Composite. Rare Metal Mat. Eng. 2016, 45, 3278–3283. DOI: 1002-185X(2016)12-3278-06.
14. Huang, L.; Zhang, Y.; Geng, L. Hot Simulation Compression of in situ TiBw/Ti6Al4V Composites with Novel Network Microstructure. 7th International Conference on Physical and Numerical Simulation of Materials Processing (ICPNS 2013) Oulu, Finland, Karjalainen, LP, Porter, DA; Jarvenpaa, SA (Eds.) Trans Tech Publications Ltd: Trans Tech Publications Ltd, Zurich, Switzerland, Jul 16-19, 2013 2013.
15. 10.1142/s021797920906107x10.1142/s021797920906107x ↗
16. 10.1007/s11431-019-1452-810.1007/s11431-019-1452-8 ↗
17. 10.1080/13621718.2017.139193710.1080/13621718.2017.1391937 ↗
18. 10.1038/s41598-018-24242-010.1038/s41598-018-24242-0 ↗
19. Liu, B. X.; Geng, L.; Huang, L.; Li, X.; Cui, X.; Yin, F. Interfacial Delamination and Multiple Tunnel Cracks Toughening Mechanisms of Laminated Ti-(TiBw) Composites Under Three Point Bending Testing. In 21ST International conference on composite materials (ICCM-21); Du, S., Leng, J., Eds.; Chinese Society Composite Materials: Beijing, 2017.
20. 10.1007/978-981-13-0104-9_8610.1007/978-981-13-0104-9_86 ↗
21. 10.1016/j.jmapro.2022.01.03910.1016/j.jmapro.2022.01.039 ↗
22. 10.1080/00150193.2021.190611710.1080/00150193.2021.1906117 ↗
23. 10.4028/www.scientific.net/MSF.723.2010.4028/www.scientific.net/MSF.723.20 ↗
24. 10.4028/www.scientific.net/KEM.589-590.28110.4028/www.scientific.net/KEM.589-590.281 ↗
25. 10.1080/10910344.2015.113391610.1080/10910344.2015.1133916 ↗
26. 10.1177/095440541665418410.1177/0954405416654184 ↗
27. 10.1149/1945-7111/ac377c10.1149/1945-7111/ac377c ↗
28. 10.1016/j.jmapro.2020.04.00810.1016/j.jmapro.2020.04.008 ↗
29. 10.1080/10426914.2015.100470510.1080/10426914.2015.1004705 ↗
30. 10.1080/2374068x.2022.211687810.1080/2374068x.2022.2116878 ↗
31. 10.1080/2374068x.2022.210968410.1080/2374068x.2022.2109684 ↗
32. 10.1080/2374068x.2020.186512710.1080/2374068x.2020.1865127 ↗
33. 10.1177/2633366x2096313710.1177/2633366x20963137 ↗
34. 10.1177/095440542095877010.1177/0954405420958770 ↗
35. 10.1177/0954408922107484310.1177/09544089221074843 ↗
36. 10.1007/s00170-020-06218-510.1007/s00170-020-06218-5 ↗
37. 10.1007/s13399-022-03170-010.1007/s13399-022-03170-0 ↗
38. 10.1007/s00170-022-09352-410.1007/s00170-022-09352-4 ↗
39. 10.1007/s00170-022-09940-410.1007/s00170-022-09940-4 ↗
40. 10.1016/j.ijmachtools.2010.02.00410.1016/j.ijmachtools.2010.02.004 ↗
41. 10.1016/j.jmst.2021.12.03510.1016/j.jmst.2021.12.035 ↗
42. 10.1016/s0924-0136(03)00688-510.1016/s0924-0136(03)00688-5 ↗