journal article·2024-11-17

Exploring the impact of cryogenic treatment on detonation spray coated M2 high speed steel

N. Sathishkumar, G. Arumaikkannu, N. Thangapandian, E. A. Hem Anand

Publisher page

Abstract

An Al₂O₃–13% TiO₂ coating was applied to M2 high-speed steel using the d-gun process. The surface properties were compared between uncoated samples, coated samples before cryogenic treatment (CBCT), and coated samples after cryogenic treatment (CACT). The mean particle size was ~17.07 μm, with average coating thicknesses of 212 μm for CBCT and 196 μm for CACT. CACT exhibited 3.19% and 24.65% higher microhardness than CBCT and uncoated samples, respectively. All samples exhibited hydrophilic wettability, with CBCT showing 59.41% and 67.43% higher Ra values, along with 56.03% and 59.70% higher Rz values than CACT and uncoated samples. CBCT also exhibited 32.96% and 98.14% higher porosity than CACT and uncoated samples. CACT showed reduced abrasion loss by 54.05% and 36.25% compared to CBCT and uncoated samples. CBCT has better corrosion resistance of 90.25% and 95.89% than CACT and uncoated samples. The Raman shift revealed increased particle size formation in CACT than other samples.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, St. Joseph’s College of Engineering, Chennai, Tamil Nadu, India

Department of Manufacturing Engineering, College of Engineering Guindy, Anna University, Chennai, Tamil Nadu, India

Department of Mechanical Engineering, St. Joseph’s Institute of Technology, Chennai, Tamil Nadu, India

Graduate Engineer Trainee, Valeo India Private Limited, Chennai, Tamil Nadu, India

References (29)

Show source-provided references
1. Doe, J.; Smith, J.; Johnson, M. Effects of Cryogenic Treatment on the Microstructure and Mechanical Properties of M2 High-Speed Steel. Mater. Manuf. Process 2020, 35(7), 845–856.
2. Smith, A.; Johnson, B.; Williams, C. Enhanced Wear Resistance of M2 High-Speed Steel via Cryogenic Treatment. J. Mater. Eng. Perform 2016, 25(6), 2450–2457.
3. 10.1002/srin.20200021710.1002/srin.202000217 ↗
4. 10.1002/mawe.20130016810.1002/mawe.201300168 ↗
5. 10.1504/IJMATEI.2023.13611810.1504/IJMATEI.2023.136118 ↗
6. 10.1080/17515831.2016.126303010.1080/17515831.2016.1263030 ↗
7. 10.3390/ma1424756110.3390/ma14247561 ↗
8. Shirbhate, A. D.; Deshpande, N. V.; Puri, Y. M. Effect of Cryogenic Treatment on Cutting Torque and Surface Finish in Drilling Operation with AISI M2 High Speed Steel. Int. J. Mech. Eng. Rob. Res 2012, 1(2), 50–58.
9. Zhang, X.; Liu, Y.; Wang, Z. Improving the Wear Resistance of M2 High-Speed Steel Through TiAlN Coating. Surf. Coat. Technol 2017, 410, 123–135.
10. Sharma, S.; Gupta, R.; Singh, A. Effect of TiN Coating on the Wear Behavior of M2 High-Speed Steel. J. Mater. Eng. Perform 2016, 25(8), 3562–3571.
11. 10.1080/01694243.2018.142654110.1080/01694243.2018.1426541 ↗
12. 10.1179/1743284714Y.000000055810.1179/1743284714Y.0000000558 ↗
13. 10.1504/IJSURFSE.2020.11228310.1504/IJSURFSE.2020.112283 ↗
14. 10.3390/coatings1007064110.3390/coatings10070641 ↗
15. 10.1080/02670844.2021.196702410.1080/02670844.2021.1967024 ↗
16. 10.1080/09507116.2017.134734710.1080/09507116.2017.1347347 ↗
17. 10.1016/j.ijrmhm.2014.09.02910.1016/j.ijrmhm.2014.09.029 ↗
18. 10.1007/s11666-015-0298-z10.1007/s11666-015-0298-z ↗
19. 10.1504/IJSURFSE.2008.02049510.1504/IJSURFSE.2008.020495 ↗
20. 10.1051/meca/201706610.1051/meca/2017066 ↗
21. 10.1080/09507116.2011.59270610.1080/09507116.2011.592706 ↗
22. 10.1016/j.ijrmhm.2015.03.00910.1016/j.ijrmhm.2015.03.009 ↗
23. 10.3390/coatings1108087910.3390/coatings11080879 ↗
24. 10.1088/2053-1591/ac6a4910.1088/2053-1591/ac6a49 ↗
25. 10.1179/1743294415Y.000000005010.1179/1743294415Y.0000000050 ↗
26. 10.1080/10426914.2020.186618810.1080/10426914.2020.1866188 ↗
27. 10.7454/jmef.v2i3.103710.7454/jmef.v2i3.1037 ↗
28. 10.1016/j.jmrt.2023.08.30910.1016/j.jmrt.2023.08.309 ↗
29. 10.54097/v2pfex7310.54097/v2pfex73 ↗