Studies on Mechanical, Friction, and Wear Characteristics of Kevlar and Glass Fiber-Reinforced Friction Materials
Source abstract
Abstract
ABSTRACT Asbestos possesses properties that are ideally suitable for use as a friction material in automotive and a number of other applications. Animal and human studies carried out since the early 1900s have established that asbestos is carcinogenic and that exposure to especially asbestos dust causes a large number of diseases. Realizing the health hazards posed by asbestos, many countries started phasing out asbestos from all asbestos-containing products since the 1980s. Some of them imposed a total ban in the 1990s on the use of asbestos-containing friction products. This situation forced many manufacturers to look for alternatives to asbestos. But the efforts have only been partly successful. The search is, therefore, still on to find suitable substitutes for asbestos. Though steel wool, Kevlar, glass, and a number of other mineral fibers have been tried out on an experimental basis over the last two decades, glass and Kevlar fibers, in particular, have shown promise as potential substitutes for asb...
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Brake Systems and Friction Analysis · Tribology and Wear Analysis · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Wagner, J.C.; Sleggs, C.A.; Marchand, P.Diffuse pleural mesothelioma on asbestos exposure in the North Western Cape Province. British Journal of Industrial Medicine 1960, 17, 260–271.[PUBMED][INFOTRIEVE][CSA]10.1136/oem.17.4.260 ↗
2. Jack, N.; Wieslawa, N.The epidemiology of asbestos-related diseases. Lung Cancer 2004, 45S, S7–S15.[CSA]10.1016/j.lungcan.2004.04.008 ↗
3. Christopher, B.M.; Val, V.; Brooke, T.M.Diseases caused by asbestos: mechanisms of injury and disease development. International Immunopharmocology 2002, 2, 191–200.[CSA][CROSSREF]10.1016/S1567-5769(01)00172-2 ↗
4. Stone, J.Hazards of asbestos. American City & County 1986, 101, 68–75.[INFOTRIEVE][CSA]
5. Jones, A.P.Index on air quality and health. Atmospheric Environment 1999, 33, 4535–4564.[CSA][CROSSREF]10.1016/S1352-2310(99)00272-1 ↗
6. Erkki, Y.; Heikki, S.Special international report: occupational safety and health in Finland. Journal of Safety Research 2000, 31, 177–183.[CSA][CROSSREF]10.1016/S0022-4375(00)00039-6 ↗
7. Loken, H.Y.Asbestos free brakes and dry clutches reinforced with Kevlar aramid fiber. SAE Transactions 1980, 89, 2202–2208.[CSA]10.4271/800667 ↗
8. Jacko, M.G.; Tsang, P.H.S.; Rhee, S.K.Automotive friction materials evolution during the past decade. Wear 1984, 100, 503–515.[CSA][CROSSREF]10.1016/0043-1648(84)90029-2 ↗
9. Frank, J.W.EMCOR 66 Ultra-short fibers for asbestos-free friction materials. SAE Transactions 1986, 95, 3928–3935.[CSA]
10. Jacko, M.G.; Rhee, S.K.Brake linings and clutch facings. In Kirk-Othmer Encyclopedia of Chemical Technology, 4th Ed ; Wiley: New York, 1992; Vol. 4, 523–536.
11. Saracci, R.; Simonato, L.; Acheson, E.D.; Andersen, A.; Bertazzi, P.A.; Claude, J. British Journal of Industrial Medicine 1984, 41, 425–436.[PUBMED][INFOTRIEVE][CSA]
12. Pott, F.; Annals of Anatomical Pathology 1976, 21, 237–246.[CSA]
13. Huuskonen, M.S.; Matti, S.H.; Antti, T.; Heikki, K.; Anders, Z.; Olli, K.; Juha, N.; Kari, K.; Vesa, V. Environmental Research 1983, 30, 291–304.[PUBMED][INFOTRIEVE][CSA][CROSSREF]10.1016/0013-9351(83)90215-3 ↗
14. U.S. Environmental Protection Agency , Status Report FTI-OTS- 0386–0486, 1986.
15. International Labour Organization Safety in the Use of Mineral and Synthetic FIBERs , 1989; p. 40.
16. International Program on Chemical Safety in the Use of Mineral and Synthetic FIBERs , 1989; p. 40.
17. Davis, J.M.G.; Biological effects of man-made FIBERs. Euro Reports and Studies 1983, 81, 24.[CSA]
18. Kim, S.J.; Jang, H.Friction and wear of friction material containing two different phenolic resins reinforced with aramid pulp. Tribology International 2000, 33, 477–484.[CSA][CROSSREF]10.1016/S0301-679X(00)00087-6 ↗
19. Kim, S.J.; Cho, M.H.; Lim, D.S.; Jang, M.Synergistic effects of aramid pulp and potassium titanate whiskers in the automotive friction material. Wear 2001, 25, 1484–1491.[CSA][CROSSREF]10.1016/S0043-1648(01)00802-X ↗
20. Gopal, P.; Dharani, L.R.; Blum, F.D.Hybrid phenolic friction composites containing Kevlar pulp: Part I Enhancement of friction and wear performance. Wear 1996, 193, 199–206.[CSA][CROSSREF]10.1016/0043-1648(95)06723-X ↗
21. Halberstadt, M.L.; Rhee, S.K.Effects of potassium titanate FIBER on the wear of automotive brake linings. Wear 1978, 46, 109–126.[CSA][CROSSREF]10.1016/0043-1648(78)90114-X ↗
22. www.nedlac.org.za
23. Rusnak, R.M.; Spurgeon, W.M.Friction material testing. SAE Transactions 1970, 79, 1944–1952.[CSA]10.4271/700517 ↗
24. Gopal, P.; Dharani, L.R.; Blum, F.D.Load, speed and temperature sensitivities of a carbon-FIBER-reinforced thermosetting plastics. Wear 1995, 181–183, 913–921.[CSA][CROSSREF]10.1016/0043-1648(95)90215-5 ↗
25. Indian Standard: IS 2742 (Parts 1–5): 1994. Automotive Vehicles-Brake Linings.
26. British Standards Specification: BS AU 142 , 1968.
27. Tanaka, K.; Ueda, S.; Noguchi, Fundamental studies on the brake friction of resin-based friction materials. Wear 1972, 23, 349–365.[CSA][CROSSREF]10.1016/0043-1648(73)90022-7 ↗
28. www.leewaybrakes.com/asbestos-free.htm
29. Liu, T.; Rhee, S.K.High temperature wear of semimetallic disc brake pads. Wear 1978, 46, 213–218.[CSA][CROSSREF]10.1016/0043-1648(78)90122-9 ↗
30. Osterle, W.; Griepentrog, M.; Gross, Th.; Urban, I.Chemical and microstructural changes induced by friction and wear of brakes. Wear 2001, 2, 469–476.[CSA]10.1016/S0043-1648(01)00785-2 ↗
31. Kato, K.Wear in relation to friction—A review. Wear 2000, 241, 151–157.[CSA][CROSSREF]10.1016/S0043-1648(00)00382-3 ↗
32. Filip, P.; Weiss, Z.; Rafaja, D.On friction layer formation in polymer matrix composite materials for brake applications. Wear 2002, 252, 189–198.[CSA][CROSSREF]10.1016/S0043-1648(01)00873-0 ↗
33. Jacko, M.G.Proceedings of the International Conference on Wear of Materials, St. Louis, MO, USA, 1977, 541–547.
34. Talib, R.J.; Muchtar, A.; Azhari, C.H.Microstructural characteristics on the surface and subsurface of semimetallic automotive friction materials during braking process. Journal of Materials Processing Technology 2003, 140, 694–699.[CSA][CROSSREF]10.1016/S0924-0136(03)00769-6 ↗
35. Liblisch, A.; Rhee, S.K.Proceedings of the International Conference on Wear of Materials, St. Louis, MOUSA, 1977, 545–549.
36. Azhari, C.H.; Talib, R.J.H. Journal of Physical Sciences 1998, 9, 51–78.[CSA]
37. Ho, T.L.Proceedings of the International Conference on Wear of Materials. St. Louis, MO, USA, 1977, 70–76.
38. Talib, R.J.; Muchtar, A.; Azhari, C.H.Proceedings of the International Conference on Wear of Materials, St. Louis, MO, USA, 1977, 181–184.
39. Vaziri, M.; Spurr, R.T.; Stott, F.H.An investigation of the wear of polymeric materials. Wear 1988, 122, 329–342.[CSA][CROSSREF]10.1016/0043-1648(88)90018-X ↗
40. Bark, L.S.Polymer changes during friction material performance. Wear 1977, 41, 309–314.[CSA][CROSSREF]10.1016/0043-1648(77)90010-2 ↗
41. Rhee, S.K.; Ludema, K.C.Mechanism of formation of polymeric transfer films. Wear 1978, 46, 231–240.[CSA][CROSSREF]10.1016/0043-1648(78)90124-2 ↗
42. Mair, L.H.; Stolarski, T.A.; Vowles, R.W.; Lloyds, C.H.Wear: Mechanisms, manifestations and measurement. Report of a workshop. Journal of Dentistry 1996, 24, 141–148.[CSA]10.1016/0300-5712(95)00043-7 ↗
43. Jacko, M.G.; Tsang, P.H.S.; Rhee, S.K.Wear debris compaction and friction film formation of polymer composites. Wear 1989, 133, 141–148.[CSA][CROSSREF]10.1016/0043-1648(89)90110-5 ↗
44. Jahanmir, S.; Suh, N.P.Mechanism of subsurface void nucleation in delamination wear. Wear 1977, 44, 17–38.[CSA][CROSSREF]10.1016/0043-1648(77)90082-5 ↗
45. Scherge, M.; Shakhvorostov, D.; Pohlmann, K.Fundamental wear mechanism of metals. Wear 2003, 255, 395–400.[CSA][CROSSREF]10.1016/S0043-1648(03)00273-4 ↗
46. 2002 SAE Handbook , Vol. 2 (Parts & Components and On-Highway Vehicles—Part II); SAE International: Warrendale, Pennsylvania, 2002, Section 25.