journal article·2004-12-28

Effect of Grain Size on the Weldability of Cast Alloy 718

Xiao Huang, N. L. Richards, M. C. Chaturvedi

Publisher page

Abstract

Abstract Electron beam welding was conducted on cast alloy 718 with varying grain sizes obtained using Microcast (MX™) and conventional cast (CC) techniques. The average value per section of Total Crack Length (Av. TCL) was measured on each cross section and used to represent the material's weldability. It was found for the first time that the grain size had a reduced effect on the weldability of cast alloys, relative to that reported in the literature for wrought alloys; i.e., increased grain size in the range of 90–3000 microns resulted in improved weldability. This was determined to be related to the probability of welds intersecting grain boundaries and causing grain boundary microfissuring. The conclusion from the experimental analysis is corroborated by the use of a Weibull-type analysis to evaluate the probability of a weld microfissure occurring relative to the grain size. As grain size increases, the probability of the weld intersecting the grains is reduced, and thus, the likelihood of microfissuring is reduced. With regard to a single crystal, there are no grain boundaries intercepting the weld (probability = 0), and thus, microfissuring related to constitutional liquation of primary carbides, or segregation of species to grain boundaries would not occur.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Loria E.A. · Journal of Metals · 1988 · 36
2. Morrison, T.J., Shira, C.S. and Weisenberg, L.A. 1969.The Influence of Minor Elements on Alloy 718 Weld Microfissuring, Effect of Minor Elements on the Weldability of High Nickel Alloysp. 47NY: Welding Research Council.
3. Thompson R.G. · Welding Journal · 1985 · 91
4. 10.1179/13621719910153776110.1179/136217199101537761 ↗
5. Williams J.A. · The Journal of the Australian Institute of Metals · 1968 · 11 · 2
6. Williams J.A. · The Journal of the Institute of Metals · 1968 · 96 · 5
7. Thompson R.G. · 1994 · 21310.7449/1994/Superalloys_1994_213_228 ↗
8. 10.1016/S1359-6454(97)00017-710.1016/S1359-6454(97)00017-7 ↗
9. Huang X. · Met. Trans. · 1996 · 27 · 78510.1007/BF02648966 ↗
10. Thompson R.G. · Journal of Metals · 1988 · 44
11. Thompson, R.G. 1985. Relationship between Microstructure and Microfissuring in Alloy 718. Proceedings of Advanced High Pressure 02/H2 Technology. 1985, Huntsville, Al, USA. pp.164–179. Washington, DC: Sponsored by NASA.
12. 10.1007/BF0073862610.1007/BF00738626 ↗
13. Karlsson L. · Computer simulations. Acta Metall. · 1988 · 36 · 2510.1016/0001-6160(88)90025-9 ↗
14. 10.1179/03063457679043147110.1179/030634576790431471 ↗
15. 10.1520/JTE11532J10.1520/JTE11532J ↗