Influence of reinforcement and processing on steel-based composites: Microstructure and mechanical response
Source abstract
Abstract
Steel matrix composite reinforced with 2–4 vol.% titanium diboride particles was fabricated successfully by powder metallurgy route through hot pressing method. Influence of sintering parameters on densification was investigated by measurement of density of resultant composites. Microstructural analysis of hot-pressed materials was performed. Hardness and deformation behavior under constant load were evaluated by conducting microhardness and nanoindentation tests. The addition of titanium diboride proved to be effective for enhancement of hardness and strength. Composite with 4 vol.% titanium diboride sintered at 1100°C resulted in improved hardness and elastic modulus which could be related to Orowan strengthening resulting from homogeneous distribution of fine titanium diboride particles in steel matrix. The results indicate that proposed method is economically feasible to process steel matrix composites with improved properties. A comparatively lower temperature and pressure offers better control of interface kinetics and microstructure.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of advanced Materials Technology, CSIR-Institute of Minerals and Materials Technology, Bhubaneswar, Odisha, India
School of Minerals, Metallurgical and Materials Engineering, Indian Institute of Technology, Bhubaneswar, Odisha, India
References (41)
Show source-provided references
1. 10.1080/10426914.2015.101909110.1080/10426914.2015.1019091 ↗
2. 10.1080/10426914.2014.97359310.1080/10426914.2014.973593 ↗
3. 10.1016/j.sufcoat.2004.10.10210.1016/j.sufcoat.2004.10.102 ↗
4. 10.1016/j.actamat.2016.01.04810.1016/j.actamat.2016.01.048 ↗
5. 10.1016/j.matchar.2016.07.00510.1016/j.matchar.2016.07.005 ↗
6. 10.1080/10426914.2015.102597610.1080/10426914.2015.1025976 ↗
7. 10.1080/10426914.2015.103791710.1080/10426914.2015.1037917 ↗
8. 10.1080/10426914.2015.101909910.1080/10426914.2015.1019099 ↗
9. Sulima, I. Effect of Titanium Diboride Addition on Microstructure and Properties of the 316l Stainless Steel. 23rd International Conference on Metallurgy and Materials, Brno, Czech Republic, EU, May 21–23, 2014.
10. 10.1007/s10973-013-3251-810.1007/s10973-013-3251-8 ↗
11. 10.1080/10426914.2012.7001510.1080/10426914.2012.70015 ↗
12. 10.4150/KPMI.2013.20.3.2210.4150/KPMI.2013.20.3.22 ↗
13. 10.1016/j.jallcom.2007.05.01810.1016/j.jallcom.2007.05.018 ↗
14. 10.1080/00325899.2016.126580510.1080/00325899.2016.1265805 ↗
15. Sulima I. · J. Achiev. Mater. Manuf. Eng. · 2009 · 39 · 103
16. 10.1016/J.MATCHAR.2013.09.01210.1016/J.MATCHAR.2013.09.012 ↗
17. 10.1016/j.msea.2006.02.01210.1016/j.msea.2006.02.012 ↗
18. 10.1111/j.1744-7402.2008.02282.x10.1111/j.1744-7402.2008.02282.x ↗
19. 10.1007/s10853-006-0764-610.1007/s10853-006-0764-6 ↗
20. 10.1016/S0921-5093(97)00710-710.1016/S0921-5093(97)00710-7 ↗
21. 10.1007/s11663-017-0942-810.1007/s11663-017-0942-8 ↗
22. 10.1016/j.jmatprotec.2005.09.01110.1016/j.jmatprotec.2005.09.011 ↗
23. 10.1080/10426914.2015.102597610.1080/10426914.2015.1025976 ↗
24. 10.1016/S0167-577X(99)00123-810.1016/S0167-577X(99)00123-8 ↗
25. 10.1016/S0266.3538(00)00008-710.1016/S0266.3538(00)00008-7 ↗
26. 10.1007/s10853-008-3091-210.1007/s10853-008-3091-2 ↗
27. Sulima I. · J. Achiev. Mater. Manuf. Eng. · 2011 · 48 · 52
28. 10.1016/j.ijfatigue.2012.09.01610.1016/j.ijfatigue.2012.09.016 ↗
29. 10.1016/j.msea.2007.08.07610.1016/j.msea.2007.08.076 ↗
30. 10.1557/JMR.1992.156410.1557/JMR.1992.1564 ↗
31. 10.13189/ujms.2015.03010310.13189/ujms.2015.030103 ↗
32. 10.1016/j.scriptamat.2014.04.01310.1016/j.scriptamat.2014.04.013 ↗
33. 10.1007/s11223-014-9633-y10.1007/s11223-014-9633-y ↗
34. Çalik A. · Mater. Technol. · 2013 · 47 · 679
35. 10.2478/amm-2014-003310.2478/amm-2014-0033 ↗
36. 10.7494/mafe.2014.40.1.3310.7494/mafe.2014.40.1.33 ↗
37. 10.1179/02670830222500724010.1179/026708302225007240 ↗
38. 10.1007/s11665-014-1350-810.1007/s11665-014-1350-8 ↗
39. 10.1016/j.compscitech.2007.12.00810.1016/j.compscitech.2007.12.008 ↗
40. 10.179/imr.1994.39.1.110.179/imr.1994.39.1.1 ↗
41. 10.1007/s10853-013-7232-x10.1007/s10853-013-7232-x ↗