Effect of Process Parameters on Die Wear Behavior of Aluminum Alloy Rod Extrusion
Source abstract
Abstract
In this article, a subroutine that calculates die wear depth based on modified Archard's wear model was developed and then embedded into DEFORM-3D, with which the extrusion process of an aluminum alloy 7075 rod was simulated. Useful information was obtained from the numerical simulation, including interface pressure, distribution of instantaneous temperature, required extrusion force, die wear depth, etc. The numerical result shows that extrusion parameters have multiple effects on die wear behavior. The severest die wear occurs at the bearing entrance due to the greatest deformation, highest pressure, and temperature in this area. It is found that ram speed has no single tendency on die wear, while die wear depth rises with the elevated initial temperatures of billet and extrusion tooling. In addition, the required extrusion force has strong dependence on extrusion parameters. The extrusion force rises clearly with an increase of ram speed and a decrease of initial temperatures of billet and extrusion tooling, which is totally accordant to practical observation. Therefore, the study in this work could provide useful and helpful guides for selecting reasonable extrusion variables, predicting die life and reducing production cost.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. 10.1016/S0924-0136(99)00103-X10.1016/S0924-0136(99)00103-X ↗
2. 10.1016/j.wear.2008.03.00210.1016/j.wear.2008.03.002 ↗
3. 10.1016/S0924-0136(99)00148-X10.1016/S0924-0136(99)00148-X ↗
4. 10.1016/j.matlet.2006.11.05610.1016/j.matlet.2006.11.056 ↗
5. 10.1016/S0924-0136(03)00723-410.1016/S0924-0136(03)00723-4 ↗
6. 10.1016/j.triboint.2009.07.01110.1016/j.triboint.2009.07.011 ↗
7. Behrens B.A. · Manufacturing Technology · 2008 · 57 · 305
8. 10.1007/s00170-004-2362-610.1007/s00170-004-2362-6 ↗
9. Biglari , F.R. ; Zamani , M. Die wear profile investigation in hot forging. InProceedings of the World Congress on Engineering, London, United Kingdom, July 2–4, 2008; 3–7.
10. 10.1007/s11665-009-9521-810.1007/s11665-009-9521-8 ↗
11. 10.1016/S0043-1648(96)07461-310.1016/S0043-1648(96)07461-3 ↗
12. Bauser M. · 2001
13. 10.1016/j.jmatprotec.2008.07.00910.1016/j.jmatprotec.2008.07.009 ↗