journal article·2017-01-02

Fabrication of continuous slim aluminum fibers using a multi-tooth tool

Ruiliang Liu, Wei Zhou, Weisong Ling, Jianhua Xiang, Kejian Chen

Publisher page

Abstract

In this paper, we describe the development of a multi-tooth tool to fabricate continuous, slim aluminum fibers of an equivalent diameter of under 100 µm. Following an analysis of the process of the fabrication of aluminum fibers, we designed a geometric cutting model of the multi-tooth tool with a large inclination as well as the mechanism to form continuous, slim aluminum fibers. We conducted experiments to determine the influence of process parameters on the surface topography and the equivalent diameter of the aluminum fiber. We obtained the continuous, slim aluminum fibers with a micro-fin structure when the cutting speed, cutting depth, and feed rate were in the ranges of 0.08–0.18 mm, 5–15 m/min, and 0.1–0.2 mm/r, respectively. We found that the equivalent diameter of the aluminum fiber gradually increased with decreasing cutting speed, and increasing feed rate and cutting depth. Moreover, the result of a composition analysis indicated that the generated cutting heat had a minimal effect on the oxidation of the aluminum fiber.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Cellular and Composite Structures · Innovations in Concrete and Construction Materials · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical and Electrical Engineering, Xiamen University, Xiamen, China

State Key Laboratory of High Performance Complex Manufacturing, Central South University, Changsha, China

School of Mechanical and Electric Engineering, Guangzhou University, Guangzhou, China

Department of Mechanical and Electrical Engineering, Xiamen University Tan Kah Kee College, Zhangzhou, China

Funding

The Open Foundation of the State Key Laboratory of High-performance Complex Manufacturing (Central South University) · Fundamental Research Funds for Central Universities, Xiamen University · National Nature Science Foundation of China

References (33)

Show source-provided references
1. 10.3390/ma404081610.3390/ma4040816 ↗
2. 10.1080/1042691090336575210.1080/10426910903365752 ↗
3. 10.1016/j.jaerosci.2014.11.00810.1016/j.jaerosci.2014.11.008 ↗
4. 10.1016/j.matdes.2008.11.00410.1016/j.matdes.2008.11.004 ↗
5. 10.1016/j.mechmat.2013.11.00710.1016/j.mechmat.2013.11.007 ↗
6. 10.1080/10426914.2011.57787810.1080/10426914.2011.577878 ↗
7. Bedeloglu A.C. · Materials and Manufacturing Processes · 2013 · 28 · 650
8. 10.1002/ceat.20080021810.1002/ceat.200800218 ↗
9. Wang J.Z. · International Journal of Modern Physics · 2015 · 30 · 10
10. 10.1016/j.jmps.2012.08.00610.1016/j.jmps.2012.08.006 ↗
11. 10.1080/1042691090349690410.1080/10426910903496904 ↗
12. 10.1016/j.jmatprotec.2003.10.06510.1016/j.jmatprotec.2003.10.065 ↗
13. Farouk E. · TAPPI JOURNAL · 1999 · 82 · 202
14. 10.1080/10426914.2011.56857010.1080/10426914.2011.568570 ↗
15. 10.1016/0921-5093(91)90161-F10.1016/0921-5093(91)90161-F ↗
16. 10.1016/S0026-0657(99)80518-910.1016/S0026-0657(99)80518-9 ↗
17. 10.1016/S0924-0136(98)00116-210.1016/S0924-0136(98)00116-2 ↗
18. Qiu C.Z. · Metal Materials & Metallurgy Engineering · 2007 · 35 · 14
19. Fang C.B. · Advances in Materials Science and Engineering · 2014 · 546020
20. 10.2493/jjspe.61.128010.2493/jjspe.61.1280 ↗
21. 10.1016/S1003-6326(07)60220-910.1016/S1003-6326(07)60220-9 ↗
22. 10.1016/S0924-0136(03)00660-510.1016/S0924-0136(03)00660-5 ↗
23. 10.1016/j.jmatprotec.2007.01.03610.1016/j.jmatprotec.2007.01.036 ↗
24. 10.1007/s00170-012-4396-510.1007/s00170-012-4396-5 ↗
25. 10.1016/j.manpro.2008.05.00110.1016/j.manpro.2008.05.001 ↗
26. 10.1016/j.matchar.2013.09.00910.1016/j.matchar.2013.09.009 ↗
27. 10.1002/ceat.20110029510.1002/ceat.201100295 ↗
28. 10.1016/j.ijhydene.2014.10.13910.1016/j.ijhydene.2014.10.139 ↗
29. 10.1016/j.jpowsour.2014.01.09510.1016/j.jpowsour.2014.01.095 ↗
30. 10.1016/j.applthermaleng.2010.01.03010.1016/j.applthermaleng.2010.01.030 ↗
31. Xu J. · Tool Engineering · 2007 · 41 · 15
32. Sawa, T.; Tomuro, S.; Wada, M.; Okabe, M.; Unno, K. Influences of surface roughness of rake face on cutting performance in ductile materials. 8th International Conference on Progress of Machining Technology, Matsue, Japan, Nov 09–11, 2006, pp. 233–236.
33. He Z.S. · The Chinese Journal of Nonferrous Metals · 2009 · 19 · 1105