journal article·2024-10-02

EDM-Grinding composite machining and drilling of polycrystalline diamond tool

Yonghui Ye, Lijun Wang, Rui Mo, Yanjun Lu

Publisher page

Abstract

Polycrystalline diamond (PCD) is widely used for micro tools due to its high hardness and wear resistance. However, micro PCD tools face challenges in machining with high accuracy and efficiency. Therefore, electrical discharge machining grinding (EDM-grinding) composite machining was proposed. The effects of pulse discharge parameters on surface quality and microhole drilling performance of PCD tool were investigated. The results show that the surface roughness of helix flute and flank face of the fabricated PCD tool were 0.125 µm and 0.158 µm, respectively, as well as the inner wall roughness achieved 0.331 µm after drilling of microhole. The average current displayed a greater effect on the machining quality of PCD tools, with tool breakage in excessive average current. The preferred pulse discharge parameters were determined as an open-circuit voltage of 95 V, an average current of 1400 mA, a pulse width of 400 ns, and a pulse interval of 2000 ns.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Machining and Optimization Techniques · Advanced machining processes and optimization · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Guangdong Provincial Key Laboratory of Micro/Nano Optomechatronics Engineering, College of Mechatronics and Control Engineering, Shenzhen University, Shenzhen, China

School of Intelligent Manufacturing, Chengdu Technological University, Chengdu, China

Funding

National Natural Science Foundation of China · Guangdong Basic and Applied Basic Research Foundation under Grant · Shenzhen Science and Technology Program · Scientific Research Foundation of Chengdu Technological University

References (41)

Show source-provided references
1. 10.1088/2631-7990/acfd6710.1088/2631-7990/acfd67 ↗
2. 10.1115/1.405649010.1115/1.4056490 ↗
3. 10.1016/j.ijrmhm.2018.07.01010.1016/j.ijrmhm.2018.07.010 ↗
4. 10.1080/23311916.2016.122823410.1080/23311916.2016.1228234 ↗
5. 10.1177/168781402092318010.1177/1687814020923180 ↗
6. 10.1016/j.jmapro.2020.05.01010.1016/j.jmapro.2020.05.010 ↗
7. 10.1080/10426914.2022.214979210.1080/10426914.2022.2149792 ↗
8. 10.4028/WWW.SCIENTIFIC.NET/MSF.770.10010.4028/WWW.SCIENTIFIC.NET/MSF.770.100 ↗
9. 10.1016/S1000-9361(11)60445-710.1016/S1000-9361(11)60445-7 ↗
10. 10.1080/10426914.2021.197303010.1080/10426914.2021.1973030 ↗
11. 10.17973/MMSJ.2019_03_201813410.17973/MMSJ.2019_03_2018134 ↗
12. 10.3390/app12211116610.3390/app122111166 ↗
13. 10.3390/mi1307114110.3390/mi13071141 ↗
14. 10.1007/s00170-014-6204-x10.1007/s00170-014-6204-x ↗
15. 10.1007/s00170-017-0931-810.1007/s00170-017-0931-8 ↗
16. 10.17973/MMSJ.2019_10_201813010.17973/MMSJ.2019_10_2018130 ↗
17. 10.1016/j.ijmachtools.2012.10.00710.1016/j.ijmachtools.2012.10.007 ↗
18. 10.1016/j.ceramint.2021.10.08610.1016/j.ceramint.2021.10.086 ↗
19. 10.1515/secm-2019-003510.1515/secm-2019-0035 ↗
20. 10.3390/ma1502063610.3390/ma15020636 ↗
21. 10.1177/095440541351029010.1177/0954405413510290 ↗
22. 10.1007/s00170-019-03537-010.1007/s00170-019-03537-0 ↗
23. 10.1504/IJSURFSE.2007.01668910.1504/IJSURFSE.2007.016689 ↗
24. 10.1016/j.cirp.2012.03.11210.1016/j.cirp.2012.03.112 ↗
25. 10.1007/s00170-021-07976-610.1007/s00170-021-07976-6 ↗
26. 10.4028/www.scientific.net/AMR.126-128.59110.4028/www.scientific.net/AMR.126-128.591 ↗
27. 10.1007/s00170-015-7935-z10.1007/s00170-015-7935-z ↗
28. 10.1016/j.ces.2015.09.03010.1016/j.ces.2015.09.030 ↗
29. 10.1016/j.ejor.2017.05.02610.1016/j.ejor.2017.05.026 ↗
30. 10.1016/j.ces.2020.11558510.1016/j.ces.2020.115585 ↗
31. 10.1021/acs.iecr.2c0052610.1021/acs.iecr.2c00526 ↗
32. 10.1080/10426914.2023.223805110.1080/10426914.2023.2238051 ↗
33. 10.1080/10426914.2022.206500610.1080/10426914.2022.2065006 ↗
34. 10.1115/1.402943310.1115/1.4029433 ↗
35. 10.1016/j.jmapro.2017.04.00410.1016/j.jmapro.2017.04.004 ↗
36. 10.1016/j.procir.2016.03.01110.1016/j.procir.2016.03.011 ↗
37. 10.1016/j.diamond.2018.11.00610.1016/j.diamond.2018.11.006 ↗
38. 10.1080/10426914.2022.203214610.1080/10426914.2022.2032146 ↗
39. 10.1080/10426914.2020.171870010.1080/10426914.2020.1718700 ↗
40. 10.1016/j.jmatprotec.2007.03.10810.1016/j.jmatprotec.2007.03.108 ↗
41. 10.3901/JME.2021.23.23210.3901/JME.2021.23.232 ↗