Aluminum Coatings for Steel
Source abstract
Abstract
Abstract Aluminum coated steel possesses excellent oxidation and corrosion resistance in sulfur and marine: environments and can substitute for expensive alloy of steels. Hot dip aluminizing (HAD) and pack cementation calorizing (CAL) are dealt with in detail. IN HDA coats, some alloying action takes place, when the substrate is dipped in molten Al at 973 K for 1-2 minutes. The coat consists of an outer pure Al layer, followed by a hard intermetallic layer consisting of FeAl3 and Fe2Al5, forming a serrated interface with the base. Isothermal holding of such samples at 773-933 K for 10 minutes leads to further diffusion and phase changes. This improves resistance to thermal shock and bending. In CAL coats, the process parameters (1173-1223 K/2-4 h and pack composition), were optimized, resulting in appreciable alloying. The surface layer consists of Fe3Al and FeAl, which is comparable to the inner alloy layer of HDA coats. The structures/ property correlation is carried out for both coatings and the results compared.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Tierra , P. and M. Bernal , Proceedings of Third International Zinc Coated Sheet Steel Conference , Barcelona, June 1991 , SIE/1 , London , Zinc Development Association , ( 1992 ).
2. 10.1007/BF0054062010.1007/BF00540620 ↗
3. Sivakumar R. · Oxidation of Metals · 1982 · 17 · 39l
4. Richards R. W. · International Materials Review · 1994 · 39 · 19110.1179/imr.1994.39.5.191 ↗
5. Gibson , A. F. , F. M. Kilbane , and F. C. Dunbar , SAE Technical Series No. 810037 ,( 1981 ).
6. Coburn K. G. · Metallurgia · 1959 · 60 · 17
7. Jones , R. D. and D. P. Jones , “Coatings and Surface Treatment for Corrosion and Wear Resistance,” K.N. Strafford, P.K. Datta, and C.G. Googan, eds. , Ellis Horwood Ltd. , p. 103 , ( 1984 ).
8. Arora S. M. · Transactions of Indian Institute of Metals · 1958 · 2 · 57
9. Denner , S. and Yong-Wu-Kim , “High Temperature Protective Coatings” Proceedings of Metallurgical Society, S.C.Singhal.ed. , Conference AIME , p. 233 , ( 1983 ).
10. Langenscheid G. · Practical Metallography · 1977 · 5 · 25110.1515/pm-1977-140502 ↗
11. Heumann T. · Zeit Metall Kunde · 1959 · 50 · 617
12. Bahadur A. · Transactions of Japan Institute of Metals · 1991 · 32 · 1053
13. Bahadur A. · National Metallugical Laboratory Technical Journal · 1994 · 36 · 31
14. Kudrass K. · Metalloberflache · 1963 · 17 · 49
15. Pilling N. B. · Journal of Institute of Metals · 1923 · 65 · 529
16. Zhuk , N. P. “Course in the Theory of Corrosion and Protection of Metals” (in Russian) , Metallurgia , Moscow , p. 472 , ( 1976 ).
17. Ivanov E. G. · Protection of Metals · 1983 · 19 · 124
18. Bahadur A. · Material Transactions of Japan Institute of Metals · 1990 · 31 · 948
19. 10.1007/BF0057009310.1007/BF00570093 ↗
20. Durret , C. and R. Pichoir , [Coatings, for High Temperature Applications] , Applied Science Publishers , p. 33 , ( 1983 ).