Effects of infiltration parameters on the synthesis of nano-laminated Ti3SiC2
Source abstract
Abstract
In this paper, the nano-laminated Ti3SiC2 ceramics were fabricated by liquid silicon infiltration of gelcast porous titanium carbide (TiC) preforms. The phase compositions and microstructures of the synthesized samples at various infiltration times and temperatures were analyzed by the X-ray diffraction (XRD) technique and were observed by field emission scanning electron microscopy (FESEM). The results showed that the formed Ti3SiC2 decomposes to the TiC phase with the increase of infiltration time. It was found from the XRD patterns that the samples with an 88 wt% Ti3SiC2 MAX phase can be produced with infiltration at 1500°C for 1 h with 50 vol% solid loading and 10 wt% monomer content. It is found that the hardness and flexural strength of Ti3SiC2-based ceramic has been reduced with a decrease in SiC and TiC impurities and reach 5.8 GPa and 420 MPa, respectively, for the sample with 15 wt% impurity. The microstructure evaluation revealed that the purity and properties of samples were affected both through the gelcasting and infiltration parameters.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: MXene and MAX Phase Materials · Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Materials and Fuel Research School, Nuclear Science and Technology Research Institute, Tehran, Iran
Department of Materials Science and Engineering, MUT, Tehran, Iran
References (23)
Show source-provided references
1. 10.1016/j.matdes.2015.03.06110.1016/j.matdes.2015.03.061 ↗
2. 10.1016/j.ceramint.2016.10.01410.1016/j.ceramint.2016.10.014 ↗
3. 10.1016/j.ijrmhm.2016.08.00310.1016/j.ijrmhm.2016.08.003 ↗
4. 10.1016/j.matdes.2015.03.06110.1016/j.matdes.2015.03.061 ↗
5. 10.1080/21663831.2016.115752510.1080/21663831.2016.1157525 ↗
6. 10.1016/j.ijrmhm.2016.08.00310.1016/j.ijrmhm.2016.08.003 ↗
7. 10.1016/j.ceramint.2015.02.08810.1016/j.ceramint.2015.02.088 ↗
8. 10.1016/j.engfracmech.2016.11.00610.1016/j.engfracmech.2016.11.006 ↗
9. 10.1016/j.jeurceramsoc.2014.11.00610.1016/j.jeurceramsoc.2014.11.006 ↗
10. Yasinskaya G.A. · Institute of Materials Science · 1966 · 7 · 58
11. 10.1111/ijac.1232110.1111/ijac.12321 ↗
12. 10.1016/j.matlet.2016.05.18110.1016/j.matlet.2016.05.181 ↗
13. 10.1016/j.ijrmhm.2014.02.00610.1016/j.ijrmhm.2014.02.006 ↗
14. 10.1016/j.apt.2015.11.00210.1016/j.apt.2015.11.002 ↗
15. 10.1016/j.matlet.2016.07.06810.1016/j.matlet.2016.07.068 ↗
16. 10.1016/j.ceramint.2016.08.19410.1016/j.ceramint.2016.08.194 ↗
17. 10.1016/j.ijrmhm.2015.12.00710.1016/j.ijrmhm.2015.12.007 ↗
18. 10.1016/S0925-8388(02)01171-410.1016/S0925-8388(02)01171-4 ↗
19. 10.1016/j.msea.2007.12.00410.1016/j.msea.2007.12.004 ↗
20. 10.1016/j.scriptamat.2014.11.02510.1016/j.scriptamat.2014.11.025 ↗
21. 10.1016/j.actamat.2017.01.06610.1016/j.actamat.2017.01.066 ↗
22. 10.1016/j.ceramint.2016.03.03610.1016/j.ceramint.2016.03.036 ↗
23. 10.1016/S0925-8388(99)00003-110.1016/S0925-8388(99)00003-1 ↗