Friction stir processing combined with incremental forming effect on AA2014-T6
Source abstract
Abstract
The present-study accustomed aluminum 2014-T6 alloy of 3 mm sheet as the work material for conducting the friction stir processing. The entire studies have been completed in two phases of work. In the first phase, the work material is subjected to single-pass and multi-pass friction stir processing for its structural embattlement. A multi-faceted tool called hexagonal tool pin profile was preferred to carry out the stir processing for both the single and multi-pass cases. An optimized stir processing parameters essentially tool-speed 1000 rpm, table-feed 60 mm/min and 2° pivot angle were selected to carry out the stir processing. In the second phase, the single-pass FSPed and multi-pass FSPed work samples along with an unprocessed base metal are subjected to single point incremental forming process for its performance assessment on formability. The effect of forming parameters on average thickness, wall angle, forming limit strains and surface roughness have been analyzed on the profile forming of a cylindrical cup. To characterize the nature of profile formed structures, metallurgical, grain analysis and micro-hardness studies have been carried out at different locations of the formed segments. Conforming to the results, multi-pass FSPed samples exhibit superior formability followed by single-pass and least in the unprocessed sample.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Dayananda Sagar College of Engineering, Bangalore, India
Department of Industrial Engineering, Pandit Deendayal Petroleum University, Gandhinagar, India
Department of Mechanical Engineering, Anna University, Chennai, India
Department of Manufacturing Engineering, Indian Institute of Technology, Chennai, India
Funding
DST-SERB, New Delhi, India
References (29)
Show source-provided references
1. 10.4028/www.scientific.net/KEM.344.55910.4028/www.scientific.net/KEM.344.559 ↗
2. 10.1016/j.jmrt.2018.11.00110.1016/j.jmrt.2018.11.001 ↗
3. 10.1007/s00170-017-1238-510.1007/s00170-017-1238-5 ↗
4. 10.1016/j.matdes.2019.10768010.1016/j.matdes.2019.107680 ↗
5. 10.1080/10426914.2020.172694610.1080/10426914.2020.1726946 ↗
6. 10.1080/10426914.2019.169744210.1080/10426914.2019.1697442 ↗
7. 10.1080/10426914.2019.160518110.1080/10426914.2019.1605181 ↗
8. 10.1080/10426914.2019.165515410.1080/10426914.2019.1655154 ↗
9. 10.1080/10426914.2018.145314910.1080/10426914.2018.1453149 ↗
10. 10.3139/120.11069810.3139/120.110698 ↗
11. 10.1007/s12289-018-1434-310.1007/s12289-018-1434-3 ↗
12. 10.1080/10426914.2018.154471110.1080/10426914.2018.1544711 ↗
13. 10.1007/s11665-014-1361-510.1007/s11665-014-1361-5 ↗
14. 10.1080/02670844.2019.166527910.1080/02670844.2019.1665279 ↗
15. 10.1080/23311916.2017.140050710.1080/23311916.2017.1400507 ↗
16. 10.1007/s11665-019-04032-z10.1007/s11665-019-04032-z ↗
17. 10.1080/10426914.2019.166203710.1080/10426914.2019.1662037 ↗
18. 10.1007/s00170-019-03298-w10.1007/s00170-019-03298-w ↗
19. 10.1080/10426914.2016.123281010.1080/10426914.2016.1232810 ↗
20. 10.1016/j.jmrt.2015.01.00310.1016/j.jmrt.2015.01.003 ↗
21. 10.1007/s00170-016-9183-210.1007/s00170-016-9183-2 ↗
22. 10.1080/10426914.2020.181954210.1080/10426914.2020.1819542 ↗
23. 10.1080/10426914.2020.175388210.1080/10426914.2020.1753882 ↗
24. 10.1007/s42452-020-2330-210.1007/s42452-020-2330-2 ↗
25. 10.1016/j.promfg.2019.02.11310.1016/j.promfg.2019.02.113 ↗
26. 10.1016/j.proeng.2017.10.82910.1016/j.proeng.2017.10.829 ↗
27. 10.1080/10426914.2018.153257710.1080/10426914.2018.1532577 ↗
28. 10.1016/j.matdes.2012.07.04210.1016/j.matdes.2012.07.042 ↗
29. ASTM E 112 Standard Test Methods for Determining Average Grain Size, 229-251 (NTU).