Fabrication and properties of a stable and porous YSZ/nano-HA structure by binder jetting processes
Source abstract
Abstract
In the preparation of porous ceramic structure by binder jetting process, the stability and strength of porous ceramic structure caused by different powder composition have attracted much attention. Therefore, a pore filling method was proposed in this paper, in which nano-hydroxyapatite (nano-HA) particles with different contents were filled into yttrium-stabilized zirconia (YSZ) ceramic powders to solve the poor porosity and weak mechanical properties of porous ceramic structure. The effects of nano-HA content on the pore formation, surface quality, phase stability, compressive strength and microstructure of porous YSZ/nano-HA structure were studied. The results showed that as the mass percentage of nano-HA increased to 25 wt.%, the surface roughness of the top, side, and bottom decreased, whereas the relative density increased from 39.3% to 48.8%. After sintering at 1450°C the porous YSZ/nano-HA structures revealed a decrease in shrinkage (18.1% −11.5%) and water absorption (4.4% −2.3%), but an increase in compressive strength (30.9 MPa − 41.2 MPa). The sintered phase of YSZ/nano-HA structure presented a new microstructure evolution process, in which t-ZrO2 and Ca3(PO4)2 acted as the main crystal phase, with trace amounts of Ca0.15Zr0.85O1.85 cubic solid solution.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Additive Manufacturing and 3D Printing Technologies · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Industrial Design, Hubei Institute of Fine Arts, Wuhan, China
State Key Laboratory of Material Processing and Die & Mould Technology, Huazhong University of Science and Technology, Wuhan, China
References (30)
Show source-provided references
1. 10.1016/j.addma.2020.10164510.1016/j.addma.2020.101645 ↗
2. 10.1080/00325899.2021.191292310.1080/00325899.2021.1912923 ↗
3. 10.1080/10426914.2014.98420810.1080/10426914.2014.984208 ↗
4. 10.1016/j.ceramint.2017.07.08210.1016/j.ceramint.2017.07.082 ↗
5. 10.1016/j.compositesb.2018.08.04710.1016/j.compositesb.2018.08.047 ↗
6. 10.1016/j.actbio.2011.08.02710.1016/j.actbio.2011.08.027 ↗
7. 10.1002/mds3.1014310.1002/mds3.10143 ↗
8. 10.1016/j.jmapro.2019.05.03210.1016/j.jmapro.2019.05.032 ↗
9. 10.1179/1743294414Y.000000040210.1179/1743294414Y.0000000402 ↗
10. 10.1080/10426914.2020.181954410.1080/10426914.2020.1819544 ↗
11. 10.1016/j.msec.2014.11.02410.1016/j.msec.2014.11.024 ↗
12. 10.1016/j.progpolymsci.2021.10137510.1016/j.progpolymsci.2021.101375 ↗
13. 10.1080/17425247.2021.186001510.1080/17425247.2021.1860015 ↗
14. 10.1016/j.addma.2021.10198810.1016/j.addma.2021.101988 ↗
15. 10.1080/10426914.2018.151212210.1080/10426914.2018.1512122 ↗
16. 10.1016/j.ceramint.2018.03.04510.1016/j.ceramint.2018.03.045 ↗
17. 10.1002/gamm.20210001810.1002/gamm.202100018 ↗
18. 10.1557/mrs.2019.12110.1557/mrs.2019.121 ↗
19. 10.1016/j.pmatsci.2020.10070710.1016/j.pmatsci.2020.100707 ↗
20. 10.1016/j.matpr.2019.06.47810.1016/j.matpr.2019.06.478 ↗
21. 10.1016/j.ceramint.2019.11.15410.1016/j.ceramint.2019.11.154 ↗
22. 10.1016/j.biotechadv.2016.03.00910.1016/j.biotechadv.2016.03.009 ↗
23. 10.1016/j.actbio.2017.09.03110.1016/j.actbio.2017.09.031 ↗
24. 10.1016/j.matchemphys.2021.12461610.1016/j.matchemphys.2021.124616 ↗
25. 10.1016/j.dental.2011.07.00910.1016/j.dental.2011.07.009 ↗
26. 10.1016/j.ceramint.2019.09.21910.1016/j.ceramint.2019.09.219 ↗
27. 10.1080/00914037.2017.132065910.1080/00914037.2017.1320659 ↗
28. 10.1111/j.1551-2916.2012.05368.x10.1111/j.1551-2916.2012.05368.x ↗
29. 10.1016/j.msec.2010.02.01410.1016/j.msec.2010.02.014 ↗
30. 10.1179/1432891715Z.000000000132510.1179/1432891715Z.0000000001325 ↗