Microstructural Control in Aluminium-Killed Low C-Mn Boron Containing Steel for Improved Formability and Cold Reducing Properties
Source abstract
Abstract
Microstructural control through thermo-mechanical simulation has been attempted in aluminum-killed low carbon-manganese boron containing steel. The results from dilatometric studies were used to explain austenite decomposition characteristics under different soaking temperatures and cooling rates. A significant lowering in Ar3 temperature was observed when the steel was soaked at 1200°C followed by rapid cooling (20°C/sec). On the contrary, no appreciable change in Ar3 temperature was noticed when soaking temperature was brought down to 950°C. Hot rolling simulations were carried out both in austenitic and ferritic regions to understand microstructural evolution. Ferritic hot rolling at 750°C followed by coiling at 650°C exhibited formation of coarse recrystallized ferrite grains of 30 micron, which is ideally suited for cold forming and reducing applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Yamanaka K. · Trans. ISIJ · 1978 · 18 · 40410.2355/isijinternational1966.18.404 ↗
2. 10.2355/isijinternational.37.79710.2355/isijinternational.37.797 ↗
3. 10.2355/isijinternational.41.90010.2355/isijinternational.41.900 ↗
4. De S.K. · Steel India · 2007 · 29 · 61
5. Cho Y.R. · Iron and Steel Technology · 2004 · 46
6. 10.1179/174367507X24752010.1179/174367507X247520 ↗
7. Pandi , R. ; Militzer , M. ; Hawbolt , E.B. ; Meadowcroft , T.R. Effect of cooling and deformation on the austenite decomposition kinetics. 37th Mechanical Working and Steel Processing, ISS1996, 635 .
8. Kavarana , F. ; Singh , S.B. Study of austenite decomposition during continuous cooling using Gleeble-1500 thermo mechanical simulator. 40th Mechanical Working and Steel Processing, ISS1998, 323 .
9. 10.1016/j.msea.2006.01.07310.1016/j.msea.2006.01.073 ↗
10. Perry , A.C. ; Thompson , S.W. ; Speer , J.G. Physical metallurgy of ferritic hot rolled carbon steel. 41st Mechanical Working and Steel Processing, ISS1999, 935 .
11. Wilson F.G. · International Materials Reviews · 1988 · 33 · 22110.1179/imr.1988.33.1.221 ↗