Investigation of Processing Conditions of Melded Parts to Determine Process Boundaries
Source abstract
Abstract
Melding, a novel method for producing seamless joints in thermosetting composites utilising the Quickstep™ process, is explored in this paper. The effect of processing conditions on the quality of melded joins is examined and a set of processing boundaries defined so that the strength of melded joints is optimized. HexPly® 914c pre-preg material was exposed to a range of processing temperatures prior to joining via the melding process. Differential Scanning Calorimetry analysis was carried out to investigate the degree of cure of material prior to final joining, and it was found that minimal cure occurs at temperatures below 120°C. After consolidation and cure of the melded parts, short beam shear testing was conducted to evaluate the strength of the melded interface. Exposure temperatures between 65°C and 120°C were found to optimize short beam shear join strength. Mode I double cantilever beam and mode II end notched flexural tests showed no detrimental effect of elevated exposure temperatures prior to joining.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Epoxy Resin Curing Processes · Mechanical Behavior of Composites · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. 10.1016/B978-008042699-0/50003-610.1016/B978-008042699-0/50003-6 ↗
2. 10.1016/S0143-7496(98)00033-510.1016/S0143-7496(98)00033-5 ↗
3. Griffiths B. · SAMPE Journal · 2004 · 40 · 41
4. Bond , D. ; Coenen , V. ; Hatrick , M. ; Law , H. ; Brosius , D. ; Nesbitt , A. A feasibility study of quickstep processing of an aerospace composite material . In SAMPE Europe International Conference , Paris , 2005 .
5. Corbett , T. ; Forrest , M. ; Law , H. ; Fox , B. Melding: A new alternative to adhesive bonding . In 26th SAMPE Europe International Conference , Paris , 2005 .
6. Ellis , B. The kinetics of cure and network formation . In Chemistry and Technology of Epoxy Resins , Blackie Academic and Professional , UK , 1993 .10.1007/978-94-011-2932-9_3 ↗
7. 10.1007/BF0035289910.1007/BF00352899 ↗
8. Johnson J.W. · Series A, Mathematical and Physical Sciences · 1980 · 294 · 48710.1098/rsta.1980.0058 ↗
9. 2000 · 43
10. 1993 · 1
11. 1993 · 1
12. 2004
13. 10.1080/0360255930801923410.1080/03602559308019234 ↗
14. Zhang , J. ; Fox , B.L. Manufacturing process effects on the mode I interlaminar fracture toughness and nanocreep properties of CFRP . In SAMPE Europe International Conference , Paris , 2005 .