Controlling the Structural Integrity of Injection Molded Parts in Debinding and Sintering by Experimental Design
Source abstract
Abstract
Abstract The preservation of the structural integrity of injection molded Fe-8% Ni in debinding and sintering was studied using four spherical ball specimens having diameters of 10 mm, 20 mm, 30 mm and 40 mm. Different degrees of defects existed in the as-molded specimens due to jetting during molding, which subsequently transformed into cracks when the debinding conditions were not properly controlled. The manifestation of molding defects during debinding was most severe for specimens having a green diameter of 40 mm, but could be avoided by optimizing the extraction temperature in solvent debinding and the heating rate in thermal debinding. For the processing conditions selected in the experimental trials which were designed using the Taguchi method, distortion as a result of slumping could be reduced to a magnitude close to the ±0.3% tolerance commonly quoted for metal injection molded parts.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Injection Molding Process and Properties · Powder Metallurgy Techniques and Materials · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. German , R. M.Powder Injection Molding, Metal Powder Industries Federation, Princeton , NJ , pp. 1 – 16 , ( 1990 ).
2. Miura , R. , and S. Takamori ,Powder Injection Molding Symposium, 1992 , P.H. Booker , J. Gaspervich , and R.M. German , eds. Metal Powder Industries Federation, Princeton , NJ , pp. 359 – 370 ,( 1992 ).
3. Piccirillo N. · International Journal of Powder Metallurgy · 1992 · 28 · 13
4. Richerson , D. W.Modern Ceramic Engineering, Marcel Dekker, Inc. New York , pp. 488 – 489 , ( 1992 ).
5. Sih G. C. · Progressively expanding molding with single or multiple selection controlling volume configuration and rate of injection material: Metal or Polymer · 1996
6. Lin S. T. · Powder Metallurgy International · 1989 · 21 · 19
7. Zhang H. · International Journal of Powder Metallurgy · 1990 · 26 · 217
8. Barker , T. B.Engineering Quality by Design, Marcel Dekker, Inc. New York , pp. 27 – 34 , ( 1990 ).
9. Hens K.F. · Powder Metallurgy International · 1991 · 23 · 15
10. Merhar J. R. · Metal Powder Report · 1990 · 45 · 22910.1016/S0026-0657(10)80242-5 ↗