RAPID SOLIDIFICATION OF MAGNESIUM BY GAS ATOMIZATION
Source abstract
Abstract
ABSTRACT A pilot plant gas atomizer is described which is suitable for the production of rapidly solidified magnesium powders and other reactive metals. Safety features of the plant and the operating procedure are discussed. Results are presented of the particle size distributions obtained in pure magnesium which are compared with those of aluminum. It is noted that magnesium powders obtain about the same median diameter as aluminum powders made under similar atomizing conditions and at the same volumetric flow rate of the liquid metal, despite the fact that the surface tension and the viscosity of magnesium are lower and, therefore, more favorable for aerodynamic break up in atomization. This is explained in terms of the lower density, hence the faster acceleration, of magnesium droplets in the gas jet, as a result of which the time available for efficient break up in regions of high relative velocity is shorter. Recommendations are put forward for future research based on gas atomized magnesium powders.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fluid Dynamics and Heat Transfer · Fluid Dynamics and Mixing · Electrohydrodynamics and Fluid Dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Hehman , F. , and H. Jones , in Magnesium Technology , Institute of Metals , London , ( 1987 ) .
2. Jones H. · International Journal of Powder Metallurgy · 1987 · 23 · 13
3. Froes F.H. · Journal of Metals · 1987 · 39 · 14
4. Suryanarayana C. · International Journal of Powder Metallurgy · 1990 · 26 · 117
5. Krishnamurty , S. , and Y.W. Kim , in Modern Developments in Powder Metallurgy , Vol. 20 , compiled by P.U. Gummeson and D.A. Gustafson, Metal Powder Industries Federation , Princeton , NJ , 615 p, ( 1988 ).
6. Busk R.S. · Transaction of AIME · 1950 · 188 · 297
7. Das , S.K. , and C.F. Chang , in Rapidly Solidified Crystalline Alloys , eds. S.K. Das, B.H. Kear, and CM. Adam , Metallurgical Society of AIME , Warrendale , PA , p. 137 ( 1985 ).
8. Kattamis , T.Z. , in Lasers in Metallurgy , eds. K. Mukherjee and J. Mazumdar , The Metallurgical Society of AIME , Warrendale , PA , p. l ( 1981 ).
9. Raghunathan N. · Materials Science and Technology · 1990 · 6 · 62910.1179/mst.1990.6.7.629 ↗
10. Kainer , K.U.Proceedings of PM 90, Institute of Metals , Vol. 1 , p. 519 , ( 1990 ).
11. Kubaschewski O. · 1979
12. Busk , R.S.in Metals Handbook, 9th Edn. , Vol. 7 , p. 131 , Metals Park , OH , ASM3 , ( 1984 ) .
13. Unal A. · International Journal of Rapid Solidification · 1986 · 2 · 219
14. Unal A. · Materials Science and Technology · 1988 · 4 · 90910.1179/mst.1988.4.10.909 ↗
15. Unal A. · Materials Science and Technology · 1989 · 5 · 102710.1179/mst.1989.5.10.1027 ↗
16. Ozbilen , S. , A. Unal , and T. Sheppard ,in Physical Chemistry of Powder Metals Production and Properties, ed. W.M. Small , The Minerals, Metals and Materials Society , p. 489 , ( 1989 ).
17. Unal A. · Materials Science and Technology · 1987 · 3 · 102910.1179/mst.1987.3.12.1029 ↗
18. 10.1007/BF0267035010.1007/BF02670350 ↗
19. Kainer , K.U. , and J. Schroder , Proceedings of PM 90 , Institute of Metals , Vol. 2 , p. 398 , ( 1990 ).
20. 10.1016/0036-9748(80)90357-910.1016/0036-9748(80)90357-9 ↗