article·1995-11-01

Fabrication and High Temperature Strength of Nb3Al by a Modified Reactive Sintering Process

Yosuke Abe, S. Saito, Shuji Hanada

Publisher page

Abstract

Abstract Single phase Nb3Al alloys and two phase Nb3Al alloys containing a Nb solid solution (Nbss) or Nb2Al are fabricated by a modified reactive sintering process. This process, called the clad chip extrusion (CCE) method, consists of clad-rolling Al/Nb/Al three layered plates, cutting the clad-rolled plates into pieces, extruding a container filled with the pieces and heat-treating the extruded Nb/Al composite rod with a very fine micro structure. Heat-treatments combined with HIPing are used to form high-density Nb3Al compacts containing neither Kirkendall voids nor alumina particles. Nb3Al alloys are brittle below 1300 K and fracture before yielding in compression tests in this temperature region. Single phase Nb3Al alloys with the compositions from 20·2 to 23·3 at% Al possess very high yield strength in compression above 1473 K. The compressive strengths are almost independent of Al content, and the materials exhibit dynamic recrystallization around initial grain boundaries at large strains. Two phase alloys of Nb3Al and Nbss deform, without cracking at lower temperatures, to larger strains, although they have lower yield strengths.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Metal and Thin Film Mechanics · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.