INVESTIGATION OF THE ELECTROCHEMICAL CORROSION RESISTANCE OF HYBRID Ni-SiC-FLUOROPOLYMER COMPOSITE COATINGS
Source abstract
Abstract
ABSTRACT In the present study, an attempt has been made to use dispersed ceramic and polymer particles to produce nickel hybrid composite coatings and to evaluate the effect of these particles on the electrochemical corrosion of these coatings. A nickel-plating bath with low concentration of nickel ions (45 g/dm 3 ), brightening agent, surfactants, and dispersed particles of SiC with PTFE or CFx were used for deposition of the hybrid composite electrochemical coatings. Scanning electron microscopy (SEM) was used to examine the deposit morphology with EDX (LEO 435VPi and LEO 1530) in order to determine the composition of nanocrystalline composite coatings on the same surfaces. The weight percentage of the dispersed phase in the coatings was determined gravimetrically. A Siemens D500 Diffractometer with Si[Li] radiation was used to examine texture and grain size. A voltammetric method was used for examination of the samples of hybrid composite coatings. After surface degreasing with acetone in an ultrasonic bath, the samples were transferred to a three-electrode cell. Platinum foil served as the counter electrode. The reference electrode was a silver-silver chloride electrode (SCE) during tests in 0.5 M NaCl, while for the measurements performed in 0.1 M H2SO4, a sulphate electrode was used via an electrolytic bridge with a Haber-Luggin capillary. The voltammetric measurements were carried out using computer-controlled ATLAS 98. The sweep rate was 1 mV/s after stabilization of the open-circuit potential at a temperature of 20± 2 ○ C. Results were used for calculation of the free corrosion potential and current. ACKNOWLEDGMENTS This work was performed under the auspices of the State Committee for Scientific Research though Grant No. 7 T08C 01020.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Corrosion Behavior and Inhibition · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Ramesh Bapu G.N.K. · Plat. and Surf. Finish · 1995 · 4 · 86
2. Helle K. · Trans. Inst. Metal Finish. · 1997 · 75 · 5310.1080/00202967.1997.11871143 ↗
3. Ramesh C.S. · Surf. Enginee · 1991 · 7 · 21610.1179/sur.1991.7.3.216 ↗
4. Yeh S.H. · Plat. and Surf. Finish. · 1997 · 3 · 54
5. 10.1149/1.137727910.1149/1.1377279 ↗
6. Roos , J.R. ; Celis , J.P. Is the electrolytic codeposition of solid particles a reliable coating technology? Proc. AES Tech. Conf. SUR/FIN'84, paper 0–1 , July 16–19 , 1984 .
7. Tanida , Y. Sliding parts excellent in wear resistance and apparatus for their manufacture. Japanese Patent 05, 255, 896 , March 12 , 1992 .
8. Kurosawa , K. ; Kawagoe , R. ; Kojima , T. Manufacture of composite-plated metals with good sliding properties and wear resistance. Japanese Patent 07, 207, 496, Jan. 18, 1994 .
9. Kobayashi , Y. Method for electroplating a composite film with gradient composition on axles and bearings of various machines. Japanese Patent 08, 311, 696, May 18, 1995.
10. Guo Z. · Cailao Baohu · 2001 · 34 · 4
11. Szeptycka B. · Inżynieria Powierzchni · 1999 · 2 · 8
12. Szeptycka B. · Inżynieria Powierzchni · 2000 · 3 · 12
13. Szeptycka B. · Inżynieria Powierzchni · 2000 · 4 · 19
14. Szeptycka B. · Inżynieria Powierzchni · 2001 · 3 · 21
15. Szeptycka B. · Galvanotechnik · 2002 · 3 · 663
16. Szeptycka , B. Hybrydowe powłoki glwaniczne Ni-SiC-PTFE, The hybrid galvanic coatings Ni-SiC-PTFE. Ochrona przed korozja 2002, special issue, 7th Polish Crrosion Conference KOROZJA 2002 , Cracow , Poland , June, 17–21 , 2002; Banaś, J., Filipek, R. Żurek, Z., SIGMA-NOT, Cracow, 2002, 390–395 .
17. Szeptycka B. · Werkstoffe und werkstoffetechnische anwendungen · 2002 · 11 · 20
18. Szeptycka B. · Acta Physica Polonica A · 2002 · 102 · 19910.12693/APhysPolA.102.199 ↗