journal article·1994-08

Manufacture of High Performance Carbon Fibers from Precursors of Various Diameters

D.H. Isaac, S. Ozbek

Publisher page

Abstract

Abstract The effects of fiber diameter on the mechanical properties of PAN-based carbon fibers have been investigated in a series of processing experiments on fibers with different starting filament diameters. The fiber tows, with similar initial mechanical performance, were stretched at high temperatures to produce a large number of fiber types with a wide range of filament diameters. The three starting carbon fibers tows had nominal filament diameters of 5 μm, 6·5 μm, and 10 μm and contained 12000, 6000, and 3000 filaments respectively. These tows were stretched for 5 minutes at 2600°C with a series of loads of up to 6 kg. For all fiber types and all stretching conditions, substantial increases in Young's moduli were induced, the increases being closely related to the induced extensions. However, it was found that tensile strengths generally decreased if fibers were subjected to high temperatures without significant stretching. On the other hand, the tensile strengths were restored to their original values when greater strains were induced by using higher stresses. Although fibers with a relatively large diameter of 8·3 μm were produced with a modulus of -470GPa and strength of -3·7 GPa, greater improvements in mechanical properties were achieved with smaller diameter fibers. The loads and temperatures involved in these hot stretching experiments were not excessive, and the investigations showed that serious consideration should be given to the feasibility of commercial production of high performance PAN-based carbon fibers by this processing route.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fiber-reinforced polymer composites · Graphene research and applications · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. 10.1007/BF0116058410.1007/BF01160584 ↗
2. Bacon R. · 1969 · 9 · 285
3. 10.1038/213690a010.1038/213690a0 ↗
4. Jenkins G. M. · 1976
5. Johnson J. W. · 1969 · 9 · 229
6. Watt W. · 1970 · 417
7. 10.1063/1.173555910.1063/1.1735559 ↗
8. 10.1038/221357b010.1038/221357b0 ↗
9. Johnson W. · 1970 · 447
10. Hishiyama Y. · 1973 · 269
11. Reynolds W. N. · Philosophical Transactions of the Royal Society of London · 1980 · 294 · 45110.1098/rsta.1980.0054 ↗
12. Sumida A. · 34th SAMPE Symposium · 1989 · 2579
13. Fitzer E. · 1988 · 2 · 73
14. Ozbek S. · 1991 · 308
15. Ozbek S. · 1991 · 307
16. 10.1080/1042691940893489910.1080/10426919408934899 ↗
17. Francis J. G. · 1991 · 173
18. 10.1080/1042691940893489810.1080/10426919408934898 ↗
19. Ozbek S. · 1991 · 270
20. 10.1016/0008-6223(89)90197-810.1016/0008-6223(89)90197-8 ↗
21. 10.1007/BF0240309410.1007/BF02403094 ↗
22. Sharp J. V. · 1971 · 68
23. 10.1088/0022-3727/2/6/30310.1088/0022-3727/2/6/303 ↗
24. Tokarsky E. W. · 1975 · 301