journal article·2002-01-12

LIME-BASED FLUX INJECTION FOR PIG IRON REFINING IN INDUSTRIAL LADLES

Varadarajan Seshadri, Carlos Antônio da Silva, Itavahn Alves da Silva

Publisher page

Abstract

A software for lime-based flux injection for desulfurization of pig iron in ladle has been developed with the objective of predicting end sulfur content and temperature in one of the steel plants situated in the Minas Gerais State, Brazil, namely Belgo Mineira S.A. The software is also capable of assessing the influence of various process parameters such as flow rate, flux composition, depth of injection, amount of carry-over slag, initial temperatures of the charging materials, etc., on the process of refining. The mathematical model on which the computer code and the software are based, takes into consideration the contribution of the top slag, the injected particles, and the particles adhering to the bubbles, in the process of desulfurization. Transport phenomena parameters used in the model were chosen after an extensive literature survey. The thermodynamic parameters involved in the various exothermic and endothermic reactions have been considered in the thermal balance. A comparison between the results obtained from injection trials with 30-ton ladle showed that the predicted values using the software are reasonably in agreement with the actually observed values with respect to end sulfur content.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgical Processes and Thermodynamics · Iron and Steelmaking Processes · Metal Extraction and Bioleaching

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. Silva, I.A. 1999. “Modelamento Matemático da Dessulfuração e Desfosforação do Gusa por Injeção de Fluxantes”. Brazil: Department of Met. Eng. and Mater., Universidade Federal de Minas Gerais.
2. 10.2355/isijinternational.37.2110.2355/isijinternational.37.21 ↗
3. Grievenson P. · Ironmaking and Steelmaking · 1984 · 11 · 41
4. Oguchi A. · Ironmaking and Steelmaking · 1984 · 11 · 203
5. Hassal G.J. · Ironmaking and Steelmaking · 1981 · 18 · 359
6. Middleman S. · 1998
7. 10.1007/BF0265414510.1007/BF02654145 ↗
8. Guthrie R.I.L. · 1989
9. Mills A.F. · 1992
10. Szekely J. · 1970
11. Sahai Y. · Metall. Trans. · 1982 · 13 · 12510.1007/BF02666963 ↗
12. Sahai Y. · 1982
13. 10.2355/isijinternational.35.110.2355/isijinternational.35.1 ↗