journal article·2007-03-19

Surface Characterization of Hot and Cold Rolled Low-Carbon Steel Strips after Galvanizing and Galvannealing

Maribel de la Garza, Martha Patricia Guerrero, Patricia Zambrano, Rafael Colás, Yvan Houbaert

Publisher page

Abstract

Abstract Surface topography is of paramount interest in science, technology, and industry. Surface characteristics dominate functional applications in the fields of friction, wear, lubrication, fatigue, sealing, joining, reflecting, painting, bearing surfaces, and optical properties. The morphology of surfaces can be studied with the aid of techniques such as contact profiler and atomic force microscopy, among others, as will be discussed in this work. Samples of galvanized and galvannealed low-carbon steel strips were obtained to analyze their roughness. The influence of parameters such as rolling direction and the type of rolling process (hot and cold) and the face (top or bottom) of the sheet was analyzed in samples that were either galvanized or galvannealed in a laboratory simulator. Results show that the processing parameters exert a high influence on surface topography. Keywords: GalvanizingGalvannealingSteel stripSurface roughness ACKNOWLEDGMENTS The authors acknowledge the support from the National Council for Science and Technology (CONACYT), Mexico and the Program for the Support of Science and Technology (PAICYT) of UANL. Notes HR, Hot rolled; CR, Cold rolled.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Adhesion, Friction, and Surface Interactions · Tribology and Lubrication Engineering · Surface Roughness and Optical Measurements

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (8)

Show source-provided references
1. 10.1179/03019230067739010.1179/030192300677390 ↗
2. 10.1016/j.actamat.2003.11.00510.1016/j.actamat.2003.11.005 ↗
3. 10.1016/S0890-6955(97)00113-210.1016/S0890-6955(97)00113-2 ↗
4. Zapponi , M. ; Perez , T. ; Migliorino , D. Influence of dirtiness and roughness of steel base on the spangle homogeneity and size. 90th Galvanizers Association Annual Meeting,Indianapolis 1998 , Vol. 1 , p. 24 .
5. 10.1016/0043-1648(95)06697-710.1016/0043-1648(95)06697-7 ↗
6. Moreno M. · Universidad Autónoma de Nuevo León, San Nicolás de los Garza · 2006
7. Deutsches Institut für Normung e. V. (DIN) 4768. Determination of roughness parameters Ra, Ry, Rz, Rmax by means of stylus instruments; terms, measuring conditions . Berlin , 1990 .
8. 10.1016/S0301-679X(99)00013-410.1016/S0301-679X(99)00013-4 ↗