Microstructure and Surface Topography Evolution of Ti and Ni Thin Structures
Source abstract
Abstract
Abstract This paper presents the results of a study of microstructure and surface topography of electron-beam deposited nano-scale (10–500 nm thick) thin films of Ti and Ni. The films are deposited on substrates with different moduli (Ni, NaCl, and Si). The microstructure of each film is characterized using transmission electron microscopy. The surface topography is also studied using atomic force microscopy. The microscopic observations show that the grain size and film roughness increase with increasing film thickness. The grain coarsening observed in Ni films was greater than that observed in Ti films. Furthermore, the effects of coarsening amplitude on (001) oriented NaCl crystals were much greater than those on stiffer (001) oriented silicon substrates. The implications of the results are then discussed for applications of thin films in biomedical engineering, microelectronics, and micro-electro-mechanical systems (MEMS).
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Adhesion, Friction, and Surface Interactions · Surface Roughness and Optical Measurements
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Allameh S.M. · Journal of Microelectromechanical Systems · 2002
2. Aspar, B., Cartier, A., Moriceau, H., Rayssac, O. and Cartier, A.M. 2000. “Multilayer structure with controlled internal stresses used. e.g., in microelectronic circuits as substrate or stiffener layer includes first and second stress-adapting layers having contact stresses with first and second main layers”. Vol. (WO-200048238 A1),
3. 10.1115/1.290433210.1115/1.2904332 ↗
4. Carpenter, J.A.J. 1991. Measurements of properties of materials in multilayer ceramic capacitors and microelectronic packaging. Presented in Symposium on Metal-Ceramic Joining presented at the TMS Fall Meeting. 1991, Warrendale, PA. pp.205–217. Publ by Minerals, Metals and Materials Soc (TMS).
5. Buchwalter, L.P., Callegari, A.C., Cohen, S.A., Graham, T.O., Hummel, J.P., Jahnes, C.V., Purushothaman, S., Saenger, K.L. and Shaw, J.M. 2001. “Fabrication of multilayer microelectronic interconnect structure used in high density interconnects for high performance microelectronic device chips uses a low dielectric constant material, e.g., air as the intralevel dielectric”. Vol. (US-6184121 B1),
6. Larson, E.A. and Larson, M.L. 2002. “Implantable drug-deliverable medical device production, comprises coating in-vivo biocompatible and biodegradable liquid/gel solutions comprising polymer and predefined drug(s), on device and forming a film during usage”. Vol. (US-6309380 B1),
7. Shirkhanzadeh, M. 1993. “Coating implants of titanium and/or zirconium to form biocompatible oxide coating by anodic electrolytic deposition in an alcoholic nitric acid electrolyte or alkali metal nitrate and opt. coating with calcium phosphate to prevent thrombus formation”. Vol. (US-5211833 A),
8. Dearnaley, G. and Lankford, J. 1997. “Redn. in thrombogeneticity of medical implants i.e. heart valves by coating the titanium based implants with diamond like carbon forming a biocompatible covering”. Vol. (WO-9640308 A1),
9. Tanner, D.M., Walraven, J.A., Irwin, L.W., Dugger, M.T., Smith, N.F., Eaton, W.P., Miller, W.M. and Miller, S.L. 1999. Effect of humidity on the reliability of a surface micromachined microengine. Presented in Annual Proceedings—Reliability Physics (Symposium). 1999, Piscataway, NJ. pp.189–197.10.1109/RELPHY.1999.761611 ↗
10. Miller, S.L., Sniegowski, J., LaVigne, G. and McWhorter, P.J. 1996. Friction in surface micromachined microengines. Presented in Proc. SPIE Smart Electronics and MEMS. 1996, San Diego, CA. pp.197–204.
11. Mani, S.S., Fleming, J.G., Walraven, J.A., Sniegowski, J.J., de Boer, M.P., Irwin, L.W., Tanner, D.M., LaVan, D.A., Dugger, M.T., Jakubczak, J. and Miller, W.M. 2000. Effect of W coating on microengine performance. Presented in Annual Proceedings—Reliability Physics (Symposium). 2000, Piscataway, NJ. pp.146–151.10.1109/RELPHY.2000.843905 ↗
12. 10.1149/1.222082310.1149/1.2220823 ↗
13. Kurzydlowski, K.J. Quantitative characterization of surface topography and its effect on corrosion and wear resistance of TiN thin films. Transactions of the Annual Meeting of the Society for Biomaterials in conjunction with the International Biomaterials Symposium. Vol. 2, pp.539
14. Ebothe J. · Materials Science and Engineering B (Solid-State Materials for Advanced Technology) · 1996 · 42 · 10510.1016/S0921-5107(96)01690-X ↗
15. 10.1557/PROC-546-12110.1557/PROC-546-121 ↗
16. Wuttig, M. and Schetky, L.M.D. Shape memory actuators in MEMS and medicine. Presented in Proceedings of 7th International Conference on New Actuators—ACTUATOR 2000. Bremen, Germany. Edited by: Borgmann, H. pp.151–155. MESSE BREMEN GMBH.
17. Zhou, S., Sun, X.Q. and Carr, W.N. 1997. A micro variable inductor chip using MEMS relays. Presented in Proceedings of International Solid State Sensors and Actuators Conference (Transducers ’97). 1997, New York, NY, USA. pp.1137–1140. IEEE.
18. 10.1016/0924-4247(89)80066-410.1016/0924-4247(89)80066-4 ↗
19. Hayashi S. · Japanese Journal of Applied Physics, Part 1: Regular Papers and Short Notes · 1991 · 30 · 228510.1143/JJAP.30.2285 ↗
20. 10.1063/1.114571510.1063/1.1145715 ↗
21. Smits J.G. · Proceedings of the SPIE—The International Society for Optical Engineering · 1995 · 2383 · 38
22. 10.1088/0960-1317/2/3/02710.1088/0960-1317/2/3/027 ↗
23. Higuchi, T., Yamagata, Y., Kudoh, K. and Iwasaki, K. Micro robot arm utilizing rapid deformations of piezoelectric elements. Presented in Robotics Research. Fifth International Symposium. Edited by: Miura, H.A.S. pp.37–44. Cambridge, USA: MIT Press.
24. Lining S. · High Technology Letters · 1997 · 7 · 29
25. 10.1063/1.114409110.1063/1.1144091 ↗
26. Hsu, W. and Xu, Z.P. An electro-thermally driven micro membrane actuator with two-way deflection. Presented in Proceedings of MICRO SYSTEM Technologies 98. Edited by: Reichl, H.O.E. pp.319–324. Berlin, Germany: VDE Verlag.
27. 10.1088/0957-0233/8/1/00810.1088/0957-0233/8/1/008 ↗
28. Paterson, C. and Dainty, J.C. 2000. A hybrid curvature/shack-Hartmann wavefront sensor for adaptive optics. Presented in Conference on Lasers and Electro-Optics (CLEO 2000). Technical Digest. Postconference Edition. TOPS Vol. 39. 2000, Salem, MA, USA. pp.605–606. Opt. Soc. America.10.1109/CLEO.2000.907452 ↗
29. Lang, S.B. and Alexe, M. Optimization and experimental verification of a pyroelectric bimorph radiation detector, Presented in ISAF 1998. Proceedings of the Eleventh IEEE International Symposium on Applications of Ferroelectrics. Edited by: Colla, E.D.D. and Setter, N., Eds. pp.195–198. Piscataway, NJ, USA: IEEE.10.1109/ISAF.1998.786668 ↗
30. 10.1002/andp.1995507050210.1002/andp.19955070502 ↗
31. 10.1016/0956-7151(93)90103-Y10.1016/0956-7151(93)90103-Y ↗
32. 10.1016/0956-7151(94)90489-810.1016/0956-7151(94)90489-8 ↗
33. 10.1016/1359-6454(95)00352-510.1016/1359-6454(95)00352-5 ↗
34. Boyne, D. 1992. MS Thesis. 1992, The Ohio State University, Columbus, OH.
35. Ding Y. · Surface Engineering · 1997 · 13 · 3110.1179/sur.1997.13.1.31 ↗
36. 10.1016/S0924-0136(98)00064-810.1016/S0924-0136(98)00064-8 ↗
37. Kolbe G. · Zeitschrift fur Metallkunde · 1998 · 89 · 343
38. Zaidi H. · Surface and Coatings Technology · 1995 · 76 · 56410.1016/0257-8972(95)02514-6 ↗
39. 10.1016/S0167-577X(02)00972-210.1016/S0167-577X(02)00972-2 ↗
40. 10.1016/0921-5093(95)10114-410.1016/0921-5093(95)10114-4 ↗
41. 10.1016/S1359-6462(02)00376-710.1016/S1359-6462(02)00376-7 ↗
42. 10.1016/S0043-1648(98)00389-510.1016/S0043-1648(98)00389-5 ↗
43. 10.1007/BF0102634610.1007/BF01026346 ↗
44. 10.1016/0043-1648(96)06958-X10.1016/0043-1648(96)06958-X ↗
45. 10.1016/0040-6090(88)90400-210.1016/0040-6090(88)90400-2 ↗
46. 10.1361/10599499877034801610.1361/105994998770348016 ↗
47. 10.1016/S0257-8972(07)80060-010.1016/S0257-8972(07)80060-0 ↗
48. Froes, F.H.A.P.G. and Niinomi, M., eds. Non-Aerospace Applications of Titanium. Proceedings of the Symposium. Presented at the 1998 TMS Annual Meeting. Presented in Non-Aerospace Applications of Titanium. Proceedings of the Symposium presented at the 1998 TMS Annual Meeting, Warrendale, PA, USA: TMS-Miner, Metals and Mater. Soc.
49. Narayan, R.J., Wei, Q., Sharma, A.K., Jagannadham, K. and Narayan, J. Superhard biocompatible coatings. Presented in Hard Coatings Based on Borides, Carbides and Nitrides: Synthesis, Characterization and Applications. Proceedings of the International Symposium held at 1998 TMS Annual Meeting. Edited by: Kumar, A.C.Y.W. and Chia, R.W.J. pp.301–308. Warrendale, PA, USA: TMS.
50. 10.1002/jbm.1022110.1002/jbm.10221 ↗
51. 10.4028/www.scientific.net/KEM.198-199.17910.4028/www.scientific.net/KEM.198-199.179 ↗
52. 10.4028/www.scientific.net/KEM.198-199.20310.4028/www.scientific.net/KEM.198-199.203 ↗
53. Matson D.W. · Proceedings of the SPIE—The International Society for Optical Engineering · 1998 · 3514 · 386
54. Moore S. · Chemical Engineering (New York) · 1994 · 101
55. 10.1016/j.scriptamat.2003.05.00110.1016/j.scriptamat.2003.05.001 ↗