journal article·1997-11

Grinding Characteristics of Hard and Brittle Materials by ELID-Lap Grinding Using Fine Grain Wheels

Nobuhide Itoh, Hitoshi Ohmori, B. P. Bandyopadhyay

Publisher page

Abstract

Abstract In this investigation, ceramics such as zirconia and silicon carbide were ground by lap grinding using the ELID (electrolytic in-process dressing) method and using various-sized metal bonded wheels (mesh sizes of #1200-#8000). Differences in the ground finish, according to the wheel grain size, and surface roughness were investigated through the use of a Scanning Electron Microscope (SEM). It was found that the ground surface roughness improved proportionally to the grain size. The SEM observations also showed that the ground surfaces using wheels over #4000 were very smooth with several minute ground grooves crossing each other without brittle fracture. Brittle-ductile transition was studied using these wheels and the removal mechanisms of silicon and tungsten carbides were also investigated. It was found that for silicon, brittle-ductile transition was obtained using wheels over #8000 and for tungsten carbides, transition was achieved using wheels over #4000. Therefore, the work materials affect the changes in the removal mechanism.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Advanced Machining and Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (7)

Show source-provided references
1. Ikeno J. · Transactions of the Japan Society of Mechanical Engineering · 1991 · 157 · 101310.1299/kikaic.57.1013 ↗
2. Jeong , H. D. and T. Nakagawa , Proceedings of 2nd International Abrasive Technology Conference, Japan Society of Grinding Engineering, p. 257 – 262 , ( 1995 ).
3. Ohmori , H. and T Nakagawa ,Annals of the CIRP, Vol. 39 /1, p. 329 – 332 , Berne : Technische Rundschau, ( 1990 ).10.1016/S0007-8506(07)61065-8 ↗
4. Ohmori , H. , Autumn Conference of JAPE, Japan Society for Precision Engineering, p. 203 – 204 , ( 1988 ).
5. Itoh , N. and H. Ohmori , Proceedings of 1 st International Abrasive Technology Conference, Japan Society of Grinding Engineering, p. 113 – 118 , ( 1993 ).
6. Itoh , N. and H. Ohmori , Proceedings of the 8th IPES, Springer-Verlag, p. 462 – 466 ,( 1995 ).
7. Itoh N. · Japan Society of Precision Engineering and Gintic · 1995 · 73