journal article·2004-12-31

Improving Short-Circuit Current Capacity, Resistance, and Breaking Load of OPGW Constructions by Modifying Aluminium Alloy With AlB2

Sedat Karabay, Yusuf Tayşı

Publisher page

Abstract

Abstract This article presents a method that can be applied to molten AA-6101 alloy to improve electrical properties of the aluminium part of the optical ground wire (OPGW) used in overhead transmission lines to protect phase conductors from lightning strike and to transmit signals and data. AA-6101 alloy in casting of the log as 6 m length and 178 mm diameter for extrusion has been inoculated by AlB2 to decrease detrimental effects of Cr, Ti, V, and Zr on the conductivity of the material. After inoculation, improved billets were extruded as 9.5 mm diameter feedstock. Required wires drawn from the feedstock according to the construction types of OPGW to be tested were exposed to aging at 175°C, 6 h (T-8). Upon completion of the back-twist and performing-type stranding process, resistance, and short-circuit current capacity and breaking load of the OPGW 88/44 constructions with other metal combinations have been examined and tested to show improvement. Results are summarized in tables and graphically.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Karabay, S. A Study on How to Improve Conductivity of 99.6% and 99.7% Purity Aluminium Castings Including High Ti, Cr and V Impurities Prior to the Milling Process at Continuous Casting Line and to Investigate the Possible Use as Raw Material to Manufacture Aluminium Conductor for the Industry. Izmit/Turkey: Kocaeli Univ. Ph.D. thesis
2. Setzer W.C. · Light Metals · 1992 · 837
3. Granger, D.A. and Hammar, L.D. 1992. Grain Size Control in EC Aluminium. Proceedings 3rd Int. Conference on Aluminium Alloys. June22–261992, Trondheim. Vol. 1,
4. 10.1016/S0924-0136(02)01110-X10.1016/S0924-0136(02)01110-X ↗
5. Kimata, R. The Current Rating of OPGW Under Fault Condition. CIGRE SC22-WG12, Sendai Meeting.
6. 10.1109/TPWRD.1986.430795110.1109/TPWRD.1986.4307951 ↗
7. Morgan V.T. · 1991
8. Helmut G.H. · International Wire and Cable Symposium Proceedings · 1991
9. Chia, H.E. 1982. High Speed Processing of SCR Al-Mg-Si Alloys for Transmissions Cables. Conference Proceedings, Wire Assoc. Asia 82-Conf. Oct.4–81982, Singapore.
10. Davies, G. 1988. Aluminium Alloy [6201,6101A] Conductors. International Conference on Overhead Line Design and Construction: Theory and Practice (up to150 kV). Nov.28–301988, London, UK. pp.93–97.
11. Serebyakova T.I. · 1996
12. Grimes Russel N. · 198210.1007/978-1-4899-2154-3 ↗
13. Saotome, H., Yoshioka, M., Okada, K. and Urasawa, K. 1988. Technology for Replacing Existing Ground Wires with Multi-Core OPGW. International Conference on Overhead Line Design and Construction Theories and Practise (up to 150 kV). 1988, London, UK.
14. Nicoud, J.C. and Gaschingard, P. 1982. Important Recent Developments in the Manufacture of Redraw Rod in Almelec (AA-6101 AlMgSi Alloy) for the Conductors Employed on Overhead Power Transmission and Distribution Lines. Conference Proceedings, Wire Assoc., Asia 82, Conf. Oct.4–81982, Singapore.