PREPARATION OF CRACK-FREE T1TAN1A-SILICA GELS
Source abstract
Abstract
ABSTRACT In light of recent models for drying and densifying gels from alkoxide solutions, results to date on titania-silica gels have been reevaluated. In this case, the goal was to prepare crack-free flat disks of densified gel, This goal had been achieved in pure silica some years ago. It was repeated for comparison with the titania-silica composition. Silica gels were prepared from tetraethylorthosilicate (TEOS)-water-isopropanol mixtures and titania-silica gels were prepared with the appropriate amount of titanium isopropoxide. Solvent was removed from reacted solutions prior to casting by attaching a vacuum pump to the flask. Gels were formed in disk-shaped molds, 7 cm in diameter, and then were dried closed, open, and supported on nylon mesh. Samples were characterized for shrinkage, distortion and microstruc-ture. Dried samples were heat treated. There is qualitative agreement for both silica and titania-silica gels with current drying and densification models.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aerogels and thermal insulation · Silicone and Siloxane Chemistry · Mesoporous Materials and Catalysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. 10.1016/0022-3093(86)90138-910.1016/0022-3093(86)90138-9 ↗
2. Shoup R. D. · U.S. Patent · 1977 · 4 · 059
3. 10.1016/0022-3093(84)90395-810.1016/0022-3093(84)90395-8 ↗
4. 10.1007/BF0055056910.1007/BF00550569 ↗
5. 10.1016/0022-3093(80)90398-110.1016/0022-3093(80)90398-1 ↗
6. Yoldas B. E. · U.S. Patent · 1981 · 4 · 278
7. 10.1111/j.1151-2916.1986.tb04804.x10.1111/j.1151-2916.1986.tb04804.x ↗
8. 10.1007/BF0070079810.1007/BF00700798 ↗
9. 10.1063/1.33523610.1063/1.335236 ↗
10. 10.1016/0022-3093(86)90116-X10.1016/0022-3093(86)90116-X ↗
11. 10.1016/0022-3093(85)90407-710.1016/0022-3093(85)90407-7 ↗
12. 10.1007/BF0072110210.1007/BF00721102 ↗
13. 10.1111/j.1151-2916.1976.tb10936.x10.1111/j.1151-2916.1976.tb10936.x ↗
14. 10.1007/BF0120350710.1007/BF01203507 ↗
15. 10.1021/j150331a00310.1021/j150331a003 ↗
16. 10.1016/0022-3093(86)90043-810.1016/0022-3093(86)90043-8 ↗
17. Zarzycki , J. “Monolithic xero- and aerogels for gel-glass processes,” Ultrastructure Processing of Ceramics, Glasses, and Composites , eds. L. L. Hench and D. R. Ulrich , John Wiley & Sons, Inc. , pp. 27 – 42 , 1984 .
18. 10.1016/0022-3093(82)90248-410.1016/0022-3093(82)90248-4 ↗
19. Wallace , S. and Hench , L. L. , The processing and characterization of gel-derived silica, MRS 3.2. Better Ceramics through Chemistry , eds. C. J. Brinker, D. R. Ulrich and D. E. Clark, Elsevier , New York , pp. 47 – 52 , 1984 .
20. 10.1016/0022-3093(86)90045-110.1016/0022-3093(86)90045-1 ↗
21. 10.1016/S0022-3093(86)80079-510.1016/S0022-3093(86)80079-5 ↗
22. 10.1016/S0022-3093(87)80056-X10.1016/S0022-3093(87)80056-X ↗
23. Cooper , A. R.“Quantitative theory of cracking and warping during the drying of clay bodies,” Ceramic Processing Before Firing, eds. G. Y. Onoda and L. L. Hench , Wiley Interscience , New York , pp. 261 – 276 , 1978 .
24. 10.1016/S0022-3093(87)80186-210.1016/S0022-3093(87)80186-2 ↗
25. 10.1016/0022-3093(88)90008-710.1016/0022-3093(88)90008-7 ↗
26. Modugno , S. A. , Fleming , J. W. and Klein , L. C.“Influence of formation parameters on the mechanical properties of gels,” MRS 88 Optical Fiber Materials and Properties, eds. S. R. Nagel, J. W. Fleming, G. Sigel, D. A. Thompson , MRS , Pittsburgh , PA , pp. 73 – 84 , 1987 .10.1557/PROC-88-73 ↗
27. 10.1016/S0022-3093(87)80334-410.1016/S0022-3093(87)80334-4 ↗
28. 10.1016/S0022-3093(87)80087-X10.1016/S0022-3093(87)80087-X ↗
29. 10.1016/0022-3093(84)90383-110.1016/0022-3093(84)90383-1 ↗
30. 10.1016/0022-3093(86)90131-610.1016/0022-3093(86)90131-6 ↗
31. Gallo , T. A. and Klein , L. C. “ Calculated vs measured viscosities of densified silica gels,” MRS 73. Better Ceramics through Chemistry , eds. C. J. Brinker, D. E. Clark, D. R. Ulrich, MRS , Pittsburgh , PA , pp. 245 – 250 , 1986 .10.1557/PROC-73-245 ↗
32. 10.1016/0022-3093(88)90059-210.1016/0022-3093(88)90059-2 ↗