journal article·1999-01

Effect of Amount of Carbonyl Iron Powders on the Sintering Microstructure, and Mechanical Properties of Fe-4 Cu Alloy Synthesized Using Metal Injection Molding

J. S. Wang, M. H. Hon

Publisher page

Abstract

Abstract An atomized iron powder used in conventional powder metallurgy, mixed with 4 wt.% Cu powders was injection molded with carbonyl iron powder and a sintering aid. The use of atomized iron powder can reduce cost, but decreases packing density and sintering rate. To improve the densification of atomized powders, 20-40 wt.% carbonyl iron powder was added for increasing packing density and promoting sintering. The sintered alloy was characterized by the bulk density, mechanical properties, and scanning electron microscope observations. The results of sintering for the samples added with 30 wt.% carbonyl powder show that the relative bulk density, hardness, tensile strength and elongation are up to 83.87%. HRF 92.2, 315.5 MPa and 4%, respectively. The proportion of carbonyl iron powders and sintering temperature were found to influence the relative bulk density and the mechanical properties of the specimens significantly.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Injection Molding Process and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Japka , J. E. , P/M in Aerospace and Defense Technologies , F.H. Froes , ed. Metal Powder Industries Federation , Princeton , NJ , pp. 79 – 91 , ( 1991 ).
2. Smart J. · Metal Powder Report · 1980 · 35 · 241
3. Pease III L. F. · International Journal of Powder Metallurgy · 1988 · 24 · 123
4. Koo K. D. · Journal of Korean Institute of Metals and Materials · 1993 · 31 · 975
5. German , R. M. , Powder Metallurgy - An Overview , I. Jenkins and J. V. Wood , eds. The Institute of Metals , London , pp. 102 – 113 , ( 1991 ).
6. Roy S.K. · Powder Metallurgy International · 1992 · 24 · 88
7. Joo D.W. · Journal of Korean Institute of Metals and Materials · 1992 · 30 · 1467
8. Lund , L. A. and S. R. Bala ,Modern Developments in Powder Metallurgy, H. H. Ausner and W. E. Smith , eds. Metal Powder Industries Federation , Princeton , NJ , Vol. 6 , pp. 409 – 421 ,( 1974 ).
9. Kulkarni , K. M.Advances in Powder Metallurgy, Metal Powder Industries Federation , Princeton , NJ , Vol. 3 pp. 329 – 340 , ( 1990 ).
10. 10.1007/BF0264621610.1007/BF02646216 ↗
11. Pease III , L. F. , and V. C. Potter , Metals Handbook , E. Klar , ed. American Society for Metals , Ohio , Vol. 7 , pp, 461 – 466 , p.499, ( 1984 ).
12. German , R. M.Powder Injection Molding, Metal Powder Industries Federation , Princeton , NJ , pp. 25 – 46 , ( 1990 ).
13. Hirschhorn , J. S.Introduction to Powder Metallurgy, American Powder Metallurgy Institute , New-York , pp. 72 – 83 , pp. 176–200 , ( 1969 ).
14. German , R. M.Sintering Theory and ractice, John Wiley and Sons, Inc. , New York , pp. 300 – 302 , pp.352–393 ,( 1996 ).