journal article·1997-11

The Impact of Tool Material and Cutting Parameters on Surface Roughness of a Nickel-Base Superalloy

S. M. Darwish

Publisher page

Abstract

Abstract The objective of the present work, is to assess the effect of tool material and cutting parameters on surface roughness of the supermet 718 Nickel-base superalloy, under dry cutting conditions and a constant nose radius (0.5 mm). The parameters investigated are cutting speed, feed rate, depth of cut and tool material. The tool materials used were the ceramic (Sandvik CC 680) and the CBN (Sandvik CB 50) inserts. These variables were investigated using a 2k factorial design. The present work demonstrates a favorable effect for ceramic inserts on surface roughness, when compared with CBN inserts. The work also, showed that the feed rate has the dominant effect among the parameters studied on the surface roughness, irrespective of the tool material used.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Advanced Machining and Optimization Techniques · Engineering Technology and Methodologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

King Saud University

References (21)

Show source-provided references
1. 10.1016/S0007-8506(07)62385-310.1016/S0007-8506(07)62385-3 ↗
2. 10.1016/S0007-8506(07)62402-010.1016/S0007-8506(07)62402-0 ↗
3. 10.1016/S0007-8506(07)60896-810.1016/S0007-8506(07)60896-8 ↗
4. Alfred , O. and P. Schmidt , “Tools and Engineering Materials with Hard, Wear - Resistant Infusions,” ASME Journal of Engineering for Industry , pp. 549 – 552 ,( 1969 ).
5. Vigneau , J. and J. Boulanger , “ Behavior of Ceramic Tools During the Machining of Nickel-base Alloys ,” Annals of theCIRP , Vol. 31 , pp. 35 – 39 ,(yl982).
6. Cogun , C. , Computer-aided Preliminary Selection of Non-traditional Machining Processes, International Journal of Mechine Tools and Manufacture , Vol. 34 , No. 3 , pp. 3I 5 – 326 ,( 1994 ).
7. et al. ., “ Machining of Hard Materials ,” Annals of the CIRP , Vol. 32 , No. 2 , pp. 417 – 427 , ( 1984 ).
8. Daniel , E. and H. Now , “ Turn Hardened Steel and Tough Super-Alloys as Easily as Mild Steels, ” Machining of Hard Materials, ASM International , Materials Park, OH , ( 1982 ).
9. Shaw , M. C. and K. Nakayama , “ The Machining of High Strength Materials ,” Annals of the CIRP , Vol. 15 , No.l, pp. 45 – 59 , ( 1967 ).
10. Farag M. M. “ Selection of Materials and Manufacturing Processes for Engineering Design ” Prentice Hall New York ( 1989 ).
11. 10.1016/0890-6955(94)90019-110.1016/0890-6955(94)90019-1 ↗
12. 10.1016/0890-6955(95)00043-710.1016/0890-6955(95)00043-7 ↗
13. 10.1080/0020754880894800110.1080/00207548808948001 ↗
14. Jane , D.Y. , Y. Choi , H. Kim , and A. Hsiao , “ Study of the Correlation between Surface Roughness and Cutting Vibrations to Develop on-line Measuring Technique in Hard Turning ,” International Journal of Mechin Tools and Manufacturing , Vol. 36 , No. 5 , pp. 453 – 464 , ( 1996 ).
15. 10.1016/0890-6955(95)00057-710.1016/0890-6955(95)00057-7 ↗
16. 10.1016/0890-6955(96)00082-X10.1016/0890-6955(96)00082-X ↗
17. Ronald D. M. W. Thomas and P. P. Lloyd “ Improving Quality Through Planned Experimentation ” McGraw-Hill New York ( 1991 ).
18. 10.1021/ie50606a02710.1021/ie50606a027 ↗
19. Sheldon , F. R. , Statistical Techniques Applied to Production Situations, Industrial Engineering Chemistry , Vol. 52 , No. 4 , pp. 507 – 509 , ( 1960 ).
20. 10.1080/00401706.1960.1048991210.1080/00401706.1960.10489912 ↗
21. Box , G. and K, Wilson, “ On the Experimental Attainment of Optimum Conditions ” Journal of Royal Statistical Society , Vol. 13 , No. 45 , ( 1951 ).