journal article·2008-10-30

Smelting of Iron Ore in Fe–Cr–C–Si Melts

E. Vardar, R. Hurman Eric

Publisher page

Abstract

Abstract Direct smelting of the South African Sishen hematite ore in Fe–Cr–C–Si melts was studied, where the aim was to increase the Fe/Cr ratio of high carbon ferrochrome melts in order to approach stainless steel compositions. Experiments in the temperature range of 1600°C to 1750°C were conducted in an inductively heated rotating cylinder technique furnace; however, due to the very fast nature of the reactions, the sintered iron ore cylinders were not rotated. The molten alloy contained 50% Cr, 0.25 to 8% C, and 1.5 to 7% Si, balance being Fe. Relevant slag metal equilibrium in the system was determined from literature and Scanning Electron Microscope (SEM) examinations. In Fe–Cr–C melts, the rate increased with increasing temperature and was independent of the carbon concentration while it decreased with decreasing Cr content of the metal. At 1600°C, the formation of a carbide layer surrounding the iron oxide was observed to be a kinetic barrier for reduction. At 1650°C and higher temperatures, a mixed rate control was suggested. When the melt contained Si, the rate again increased with temperature and was independent of Si concentration. The rate limiting factor in Fe–Cr–Si melts was suggested as the diffusion of Si in the formed slag phase. In the presence of both carbon and silicon in the alloy phase the reduction rate was similar to the rates in Fe–Cr–Si melts. Keywords: Activation energyCarbonChromiumDissolutionEquilibriumFerrochromeIronIron oreKineticsReductionSiliconSlagSmeltingStainless steelTransport phenomena ACKNOWLEDGMENT Financial and analytical support for this project provided by Columbus Stainless Steel of South Africa is gratefully acknowledged.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgical Processes and Thermodynamics · Iron and Steelmaking Processes · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Dancy T.E. · J. Iron and Steel Inst. · 1951 · 169 · 17
2. Kondakov V.V. · Izv. Vuz. Chermaya Metallurgy · 1960 · 4 · 351
3. MacRae D.R. · J. Metals · 1965 · 17 · 1391
4. Grieveson P. · Trans. Met. Soc. AIME · 1964 · 230 · 1609
5. Baker L.A. · Trans. Met. Soc. AIME · 1964 · 230 · 1228
6. Philbrook W.O. · Am. Inst. Min. Eng. · 1956 · 206 · 351
7. Krainer H. · Tech. Mitt. Krupp · 1966 · 24 · 139
8. Tarby S.K. · Trans. Am. Inst. Min. Eng. · 1967 · 239 · 1005
9. Sommerville I.D. · Ironmaking and Steelmaking · 1980 · 7 · 25
10. Sain D.R. · Metallurgical Transactions · 1976 · 7 · 23510.1007/BF02654922 ↗
11. Upadhya K. · Ironmaking and Steelmaking · 1980 · 7 · 33
12. Fruehan R.J. · Metallurgical Transactions · 1975 · 6 · 57310.1007/BF02913850 ↗
13. Fruehan R.J. · Ironmaking and Steelmaking · 1976 · 3 · 153
14. Can. Metal. Q. · 1972 · 10 · 129
15. Fulton J.C. · AIME, Elec. Furn. Steel. Conf. Proc. · 1972 · 30 · 43
16. Sevinc N. · Ironmaking and Steelmaking · 1976 · 5 · 268
17. Suzuki K. · Trans. ISIJ. · 1980 · 20 · 60710.2355/isijinternational1966.20.607 ↗
18. Watanabe T. · Trans., ISIJ. · 1974 · 14 · 42510.2355/isijinternational1966.14.425 ↗
19. Uslu E. · Journ. South Afr. Inst. Min. Metall. · 1991 · 91 · 397
20. Demir O. · Metallurgical Transactions B · 1994 · 25 · 54910.1007/BF02650075 ↗
21. Muan A. · 1965
22. Vardar , E. Reduction Dissolution of Iron Ores in Fe–Cr–C–Si Melts. PhD thesis , University of the Witwatersrand , Johannesburg , 1998 .