journal article·1995-05

Superplastic Forming of an Al-Li-Cu-Mg-Zr Alloy Using Various Forming Paths

H. Y. Wu, J. T. Chern, S Lee

Publisher page

Abstract

Abstract A series of experiments were performed by use of various forming paths during superplastic forming of an Al-Li based alloy. A fully recrystallized Al-Li-Cu-Mg-Zr alloy could be formed superplastically using paths of either a constant or a variable strain rate. The distribution of thickness along the formed sheet was confirmed by the results as being not much sensitive to the forming paths. The uniformity of the formed part affected the microstructural characteristics; the grain size was larger in regions at which the plastic deformation was larger, an effect was believed due to strain-induced grain growth. Static growth of grain showed little effect on an Al-Li based alloy during superplastic forming. The strain-induced grain growth influenced the distribution of grain size, resulting in cavitation occurring in the regions of large grain size. A two-step variable forming path could reduce cavitation in the formed part.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

a Department of Mechanical Engineering , Chung-Hua Institute of Technology , Hsinchu, Taiwan, R.O.C.

b Chien-Hsien Junior College of Technology , Chungli, Taiwan, R.O.C.

c Department of Mechanical Engineering , National Central University , Chungli, Taiwan, R.O.C.

References (16)

Show source-provided references
1. Edington J. W. · Progress of Materials Science · 1976 · 21 · 5810.1016/0079-6425(76)90005-0 ↗
2. Ghosh , A. K. , Superplastic Forming of Structural Alloys , N.E. Paton and C.H. Hamilton, eds. , AIME Publication , New York , p. 85 , ( 1982 ).
3. Wadsworth , J. Superplastic Forming , S.P. Agrawal, ed. , American Society for Metals , Metals Park , Ohio , p. 43 , ( 1985 ).
4. Chokshi A. H. · Scripta Metallurgica · 1987 · 21 · 134710.1016/0036-9748(87)90111-6 ↗
5. Wadsworth , J. C. A. Henshall , and T. S. Nieh , Aluminum-Lithium Alloys HI , C. Baker, P. J. Gregson, S. J. Harris and C. J. Peel, eds. , The Institute of Metals , London , p. 199 , ( 1986 ).
6. Chandra , N. S. C. Rama ,R.E Goforth, Superplasticity in Advanced Materials , S. Hori, M. Tokizane, and N. Furushiro, eds. , The Japan Society for Research on Superplasticity , p. 765 , ( 1991 ).
7. 10.1016/0001-6160(73)90160-010.1016/0001-6160(73)90160-0 ↗
8. Ghosh A. K. · Metallurgical Transactions · 1979 · 69910.1007/BF02658391 ↗
9. Hamilton C. H. · 1988 · 29
10. Lee S. · Journal of Chinese Society for Mechanical Engineers · 1992 · 13 · 99
11. Lin, S. Y, Study of the Superplasic Formability of an Al-Li Based Alloy , Master Thesis , Department of Mechanical Engineering , National Central University , Chung-Li , Taiwan , p. 16 , ( 1991 ).
12. Pilling , J. , and N. Ridley , Aluminum-Lithium Alloys III , C. Baker, P.J. Gregson, S.J. Harris, and C.J. Peel, eds. , The Institute of Metals , London , p. 184 , ( 1986 ).
13. Grimes , R. W. S. Miller ,R. G Butler, 4th International Aluminum-Lithium Conference,G. Champier, B. Dubost, D. Miannay, and L. Sabetay, eds., Les Editions de Physique , France , p. 239 , ( 1987 ).
14. Bampton,C.C, A. K.Ghosh,and M. W. Mahoney , Superplasticity in Aerospace- Aluminum , R. Pearce and L. Kelly, eds. , SIS Cranfield , p. l , ( 1985 ).
15. Pilling , J. B. Geary , and N. Ridley , Proceedings; of ICSMA-7 , Vol. 2 , H.J. McQueen, ed. , Pergamon Press , Toronto , p. 823 , ( 1985 ).
16. Wilkinson D. S. · Journal of Materials Science Letters · 1984 · 3 · 39510.1007/BF00724376 ↗