Effect of Soft Foamed Polyethylene and/or Aluminum Material on the Properties of a Portable Mini-Cold Room
Source abstract
Abstract
In this investigation, effects of soft foamed polyethylene (FPE) and/or aluminum (AL) material on the properties of mini-cold room were investigated. Experiments showed that the thermal conductivity of FPE material with foaming rates of 15 and 45 were 0.0270 w/m · k and 0.0334 w/m · k, respectively. Thermal conductivity improved with increasing foaming rates. The thermal conductivity and heat flux of FPE materials with different outer layers were also measured. Aluminum material could provide best heat preservation properties for the FPE insulation material. The frost accumulation and the electricity consumption of mini store-room prepared with FPE + AL material were the lowest. The decay, bleaching rate and shattering rate of table grapes were 1.9%, 7.1%, and 4.2%, and the decay rate, weight loss and fruit firmness of the apples fruits were 0.5%, 0.47%, and 8.11 Kg/cm2, respectively, after storage at 0°C for 150 days in mini cold storage prepared with FPE + AL material. The fruits of Kyoho table grapes and “Fuji” apples in this mini-cold room exhibited better quality than those in the control cold storage room. The application of mini-cold room prepared with foamed PE material covered with aluminum material could not only provide excellent thermal insulation performance, but improve the quality of fruits.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Polymer Foaming and Composites · Lignin and Wood Chemistry · Textile materials and evaluations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Li X. · Transactions of the CSAE · 2003 · 19 · 542–546
2. 10.1016/j.compscitech.2005.06.01610.1016/j.compscitech.2005.06.016 ↗
3. 10.1177/0021955X0606351010.1177/0021955X06063510 ↗
4. 10.1016/j.progpolymsci.2005.08.00210.1016/j.progpolymsci.2005.08.002 ↗
5. 10.1080/1042691080238471410.1080/10426910802384714 ↗
6. 10.1016/0032-3861(94)90283-610.1016/0032-3861(94)90283-6 ↗
7. Zhang Y. · Materials and Manufacturing Processes · 2011 · 26 · 599–603
8. 10.1080/1042691100374839210.1080/10426911003748392 ↗
9. 10.1080/1042691090344731110.1080/10426910903447311 ↗
10. Wang J. · Journal Applied Polymer Science · 2009 · 111 · 194–202
11. 10.1002/1521-3935(200208)203:12<1844::AID-MACP1844>3.0.CO;2-W10.1002/1521-3935(200208)203:12<1844::AID-MACP1844>3.0.CO;2-W ↗
12. 10.1016/j.polymertesting.2006.09.00310.1016/j.polymertesting.2006.09.003 ↗
13. 10.1016/j.polymer.2007.07.00410.1016/j.polymer.2007.07.004 ↗
14. Liu H. · Polymer Engineering and Science · 2008 · 48 · 159–167
15. Bai Y. · Transactions of the CSAE · 2003 · 19 · 190–195
16. International Standard ISO/DIS 8301. Determination of Steady State Specific Thermal Resistance and Related Properties: Heat Flow Meter.
17. International Standard ISO/DIS8497. Thermal Insulation: Determination of Steady-State Thermal Transmission Properties of Thermal Insulation for Circular Pipes.
18. China National Standard-GB10294–88. Thermal Insulation: Determination of Steady-State Thermal Resistance and Related Properties-Guarded Hot Plate Apparatus.
19. China National Standard -GB10294–88. Thermal Insulation: Determination of Steady-State Thermal Resistance and Related Properties: Heat Flow Meter Apparatus.
20. China National Standard -GB10294–88. Thermal Insulation: Determination of Steady-State Thermal Transmission Properties: Heat Flow Meter Apparatus.
21. 10.1016/j.postharvbio.2006.03.01210.1016/j.postharvbio.2006.03.012 ↗
22. 10.1016/j.foodchem.2007.10.07510.1016/j.foodchem.2007.10.075 ↗
23. 10.1080/1042691090312487810.1080/10426910903124878 ↗
24. 10.1016/j.polymer.2005.05.01610.1016/j.polymer.2005.05.016 ↗