journal article·2014-10

RC columns externally strengthened with RC jackets

G. Campione, M. Fossetti, C. Giacchino, G. Minafò

Materials and Structures· Volume 47· Issue 10
Publisher page

Abstract

In this paper the behaviour in compression of RC columns externally strengthened with concrete jacketing is analysed and a cross-section analysis of the jacketed member under axial load and bending moment is developed. The focus was to study the effect of confinement of concrete jacket on concrete core and the behaviour of compressed bars with buckling effects. Some other important aspects such as shrinkage, creep, old to new concrete surfaces and bond split effects were not included in the model because: the use of thick non-shrink grout jacket and a well-roughened surface of old-to-new concrete was supposed; long term effects were included though corrective coefficients for monolithic behaviour proposed in the literature. A preliminary validation of the model adopted was made referring to the short-term experimental data available in the literature on the compressive behaviour of RC columns strengthened with concrete jacketing. Good agreement was obtained with the available data in terms of moment-axial force domains and moment–curvature diagrams. The analysis showed the effectiveness of this reinforcing technique in improving both the strength and the ductility of RC cross-sections of columns, highlighting the importance of an accurate choice of strengthened materials (concrete grade, thickness of jacket, space and diameter of stirrups, etc.).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Altun F (2004) An experimental study of the jacketed reinforced-concrete beams under bending. Constr Build Mater 18:611–61810.1016/j.conbuildmat.2004.04.005 ↗
2. Badalamenti V, Campione G, Mangiavillano ML (2010) Simplified model for compressive behavior of concrete columns strengthened by steel angles and strips. ASCE J Eng Mech 136(2):230–23810.1061/(ASCE)EM.1943-7889.0000069 ↗
3. Branco F, Julio ES, Silva VD (2003) Structural rehabilitation of columns with reinforced concrete jacketing. Prog Struct Eng Mater 5:29–3710.1002/pse.140 ↗
4. Branco F, Julio ES, Silva VD (2004) Concrete-to-concrete bond strength. Influence of the roughness of the substrate surface. Constr Build Mater 18:675–68110.1016/j.conbuildmat.2004.04.023 ↗
5. Branco F, Julio ES, Silva VD (2008) Reinforced concrete jacketing—interface influence on cyclic loading response. ACI Struct J 105(4):471–477
6. Campione G (2011) Compressive behaviour of short fibrous reinforced concrete members with square cross-section. Struct Eng Mech 37(6):649–66910.12989/sem.2011.37.6.649 ↗
7. Computers and Structures (2010) SAP2000: integrated software for structural analysis and design CSI, version 14, Berkeley
8. Dhakal RP, Maekawa K (2002) Modelling of post-yield buckling of reinforcement. ASCE J Struct Eng 128(9):1139–114710.1061/(ASCE)0733-9445(2002)128:9(1139) ↗
9. Ersoy R, Tugrul TA, Suleiman U (1993) Behavior of jacketed columns. ACI Struct J 90:3
10. Eurocode 2 (2004) Design of concrete structures: part 1-1: general rules and rules for Buildings, EN 1992-1-1
11. Julio ES, Branco E, De Silva V (2001) Structural rehabilitation of columns with reinforced concrete jacketing. Repair Rehabil 5:29–37
12. Julio ENBS, Branco FAB, Silva VD (2004) Influence of the roughness of the substrate surface. Constr Build Mater 18:675–68110.1016/j.conbuildmat.2004.04.023 ↗
13. Julio ENBS, Branco FAB, Silva VD (2005) Reinforcing concrete jacketing-interface influence on monotonic loading response. ACI Struct J 102(2):252–257
14. Lampropoulos A, Dritos S (2010) Concrete shrinkage effect on columns strengthened with concrete jackets. Struct Eng Int 3:234–23910.2749/101686610792016781 ↗
15. Lampropoulos A, Dritos S (2011) Modelling of RC columns strengthened with RC jackets. Earthq Eng Struct Dyn 40:1689–170510.1002/eqe.1109 ↗
16. Mander JB, Priestley MJN, Park R (1988) Theoretical stress-strain model for confined concrete. ASCE J Struct Eng 114(8):1804–182610.1061/(ASCE)0733-9445(1988)114:8(1804) ↗
17. Papia M, Russo G (1989) Compressive strain at buckling of longitudinal reinforcement. ASCE J Struct Eng 115(2):382–39710.1061/(ASCE)0733-9445(1989)115:2(382) ↗
18. Penelis GG, Kappos AJ (1997) Earthquake resistant concrete structures. E&FN Spon, London, p 572
19. Russo G, Terenzani L (2006) Non linear buckling model for the longitudinal reinforcement in RC columns. In: studies and research, graduate school in concrete structures, vol. 22. Fratelli Pesenti, Politecnico di Milano, Milan, pp 227–303
20. Sfakianakis MG (2002) Biaxial bending with axial force of reinforced composites, repaired concrete sections of arbitrary shape by fiber model and computer graphics. Adv Eng Softw 33:227–24210.1016/S0965-9978(02)00002-9 ↗
21. Takeuti AR, Bento de Hanai JB, Mirmiran A (2008) Preloaded RC columns strengthened with high-strength concrete jackets under uniaxial compression. Mater Struct 41:1251–126210.1617/s11527-007-9323-0 ↗
22. Thermon GE, Pantazopoulon SJ, Elnashai AS (2007) Flexural behavior of brittle RC members rehabilitated with concrete jacketing. ASCE Struct J 133(1):1373–138410.1061/(ASCE)0733-9445(2007)133:10(1373) ↗
23. Vandoros KG, Dritos SE (2006) Axial preloading effects when reinforced concrete columns are strengthened by concrete jackets. Repair Rehabil 8:79–92
24. Vandoros KG, Dritos SE (2008) Concrete jackets construction details effectiveness when strengthening RC columns. Constr Build Mater 22:264–27610.1016/j.conbuildmat.2006.08.019 ↗