journal article·2024-05Open access

Characterisation, activation, and reactivity of heterogenous natural clays

Amrita Hazarika, Liming Huang, Arezou Babaahmadi

Materials and Structures· Volume 57· Issue 4

Abstract

Abstract Although thermal and mechanochemical activations of natural clays are well-documented, there exists a dual research gap. Firstly, a thorough investigation into the interrelationship between these activation methods and the governing parameters of reactivity for various clays has been notably lacking. Secondly, there is a distinct scarcity of studies specifically focusing on heterogeneous clays compared to the extensive research dedicated to single-layer clays specially kaolinitic clays. This study investigates the correlation of activation methods, and changes in the clay mineralogy, particle size distributions, morphology, specific surface area, and the reactivity of heterogeneous clays. Traditional thermal and mechanochemical activation methods often fall short in achieving complete dehydroxylation of heterogeneous clay minerals and improving their reactivity beyond predefined low thresholds. The results in this paper emphasize that, despite these limitations, combining these activation methods brings about significant modifications in crucial parameters. Notably, integrating 20 min of mechanochemical activation at 500 rpm with prior thermal treatment leads to 158% increase in specific surface area compared to mechanochemical activation conducted on un-calcined clays. Simultaneously, these combined activations result in up to 127% improvement in reactivity levels of heterogenous clays compared to standalone mechanochemical activation. The results underscore that, even with the advancements brought about by combined activations, the presence of impurities like iron oxides and calcite remains a noteworthy factor influencing the reactivity of kaolinitic natural clays. The study concludes by highlighting the potential of combined treatments to enhance the pozzolanicity of low-reactive heterogeneous clays, unlocking avenues for future clinker supplementation with this abundant resource.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Clay minerals and soil interactions · Zeolite Catalysis and Synthesis · Hydrocarbon exploration and reservoir analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Anders L, Antoni M, Diaz A, Hernandez J, Scrivener K (2015) Effect of fineness in clinker-calcined clays-limestone cements. Adv Cem Res 27(9):546–55610.1680/jadcr.14.00095 ↗
2. Adrián Alujas, Roger S, Almenares SB, Leyva C (2015) Pozzolanic reactivity of low grade kaolinitic clays: influence of mineralogical composition. RILEM Bookseries. https://doi.org/10.1007/978-94-017-9939-310.1007/978-94-017-9939-3 ↗
3. Taylor-Lange SC, Lamon EL, Riding KA, Juenger MCG (2015) Calcined kaolinite-bentonite clay blends as supplementary cementitious materials. Appl Clay Sci 5(108):84–93. https://doi.org/10.1016/j.clay.2015.01.02510.1016/j.clay.2015.01.025 ↗
4. Hollanders S, Adriaens R, Skibsted J, Cizer O, Elsen J (2016) Pozzolanic reactivity of pure calcined clays. Appl Clay Sci 11(132–133):552–560. https://doi.org/10.1016/J.CLAY.2016.08.00310.1016/J.CLAY.2016.08.003 ↗
5. Avet F, Scrivener K (2018) Investigation of the calcined kaolinite content on the hydration of Limestone Calcined Clay Cement (LC3). Cem Concr Res 5(107):124–135. https://doi.org/10.1016/J.CEMCONRES.2018.02.01610.1016/J.CEMCONRES.2018.02.016 ↗
6. Scrivener K, Martirena F, Bishnoi S, Maity S (2018) Calcined clay limestone cements (LC3). Cem Concr Res 12(114):49–56. https://doi.org/10.1016/J.CEMCONRES.2017.08.01710.1016/J.CEMCONRES.2017.08.017 ↗
7. Ferreiro S, Herfort D, Damtoft JS (2017) Effect of raw clay type, fineness, water-to-cement ratio and fly ash addition on workability and strength performance of calcined clay - Limestone Portland cements. Cem Concr Res 11(101):1–12. https://doi.org/10.1016/J.CEMCONRES.2017.08.00310.1016/J.CEMCONRES.2017.08.003 ↗
8. Dhandapani Y, Sakthivel T, Santhanam M, Gettu R, Pillai RG (2018) Mechanical properties and durability performance of concretes with Limestone Calcined Clay Cement (LC3 ). ;https://doi.org/10.1016/j.cemconres.2018.02.00510.1016/j.cemconres.2018.02.005 ↗
9. Scrivener K, Avet F, Maraghechi H, Zunino F, Ston J, Hanpongpun W et al (2018) Impacting factors and properties of limestone calcined clay cements (LC3). Green Mater 7(1):3–14. https://doi.org/10.1680/jgrma.18.0002910.1680/jgrma.18.00029 ↗
10. Sandberg P, Bishnoi S (2018) Sulphate optimization of binders with calcined clay using isothermal calorimetry. RILEM Bookseries. 16:422–426. https://doi.org/10.1007/978-94-024-1207-9_6810.1007/978-94-024-1207-9_68 ↗
11. Barton CD, Karathanasis AD (2002) Clay Minerals. Rattan Lal Comp, ed Encyclopedia of Soil Sciences, New York: Marcel Dekker, 187–192
12. Amin NU, Alam S, Gul S, Muhammad K (2012) Activation of clay in cement mortar applying mechanical, chemical and thermal techniques. Adv Cem Res 24(6):319–324. https://doi.org/10.1680/adcr.11.0002010.1680/adcr.11.00020 ↗
13. Alujas A, Fernández R, Quintana R, Scrivener KL, Martirena F (2015) Pozzolanic reactivity of low grade kaolinitic clays: Influence of calcination temperature and impact of calcination products on OPC hydration. Appl Clay Sci 5(108):94–101. https://doi.org/10.1016/J.CLAY.2015.01.02810.1016/J.CLAY.2015.01.028 ↗
14. He C, Osbaeck B, Makovicky E (1995) Pozzolanic reactions of six principal clay minerals: activation, reactivity assessments and technological effects. Cem Concrete Res 25(8):1691–170210.1016/0008-8846(95)00165-4 ↗
15. Poli AL, Batista T, Schmitt CC, Gessner F, Neumann MG (2008) Effect of sonication on the particle size of montmorillonite clays. J Colloid Interface Sci 325(2):386–390. https://doi.org/10.1016/J.JCIS.2008.0.01610.1016/J.JCIS.2008.0.016 ↗
16. Tole I (2022) Enhancing the pozzolanic activity of three natural clays from sweden by mechanochemical activation process. SSRN Electron J, 0–2. https://doi.org/10.2139/ssrn.410017210.2139/ssrn.4100172 ↗
17. Almenares RS, Vizcaíno LM, Damas S, Mathieu A, Alujas A, Martirena F (2017) Industrial calcination of kaolinitic clays to make reactive pozzolans. Case Stud Constr Mater 6(6):225–232. https://doi.org/10.1016/J.CSCM.2017.03.00510.1016/J.CSCM.2017.03.005 ↗
18. Ding S, Zhang L, Ren X, Xu B, Zhang H, Ma F (2012) The characteristics of mechanical grinding on kaolinite structure and thermal behavior. Energy Procedia. 16(PART B):1237–1240. https://doi.org/10.1016/j.egypro.2012.01.19710.1016/j.egypro.2012.01.197 ↗
19. Fernandez R, Martirena F, Scrivener KL (2011) The origin of the pozzolanic activity of calcined clay minerals. A comparison between kaolinite, illite and montmorillonite. Cem Concrete Res 41(1):113–122. https://doi.org/10.1016/J.CEMCONRES.2010.09.01310.1016/J.CEMCONRES.2010.09.013 ↗
20. Kumar R, Kumar S, Mehrotra SP (2007) Towards sustainable solutions for fly ash through mechanical activation. 52:157–179. https://doi.org/10.1016/j.resconrec.2007.06.00710.1016/j.resconrec.2007.06.007 ↗
21. Sa PJ, Jime C, Haro D, Pe LA, Varona I, Pe L (2000) Effects of Dry Grinding on the Structural Changes of Kaolinite Powders, 57:1649–165710.1111/j.1151-2916.2000.tb01444.x ↗
22. Baki VA, Ke X, Heath A, Calabria-Holley J, Terzi C, Sirin M (2022) The impact of mechanochemical activation on the physicochemical properties and pozzolanic reactivity of kaolinite, muscovite and montmorillonite. Cem Concr Res 162(September):106962. https://doi.org/10.1016/j.cemconres.2022.10696210.1016/j.cemconres.2022.106962 ↗
23. Tole I (2022) Ph.D. thesis: revalorization of poorly reactive sources by mechanochemical activation. Luleå University of Technology
24. Ilić B, Radonjanin V, Malešev M, Zdujić M, Mitrović A (2016) Effects of mechanical and thermal activation on pozzolanic activity of kaolin containing mica. Appl Clay Sci 123:173–181. https://doi.org/10.1016/j.clay.2016.01.02910.1016/j.clay.2016.01.029 ↗
25. Hanein T, Thienel KC, Zunino F, Marsh ATM, Maier M, Wang B, et al. (2022) Clay calcination technology: state-of-the-art review by the RILEM TC 282-CCL. Mater Struct/Materiaux et Constr 55(1). https://doi.org/10.1617/s11527-021-01807-610.1617/s11527-021-01807-6 ↗
26. Souri A, Kazemi-kamyab H, Snellings R, Naghizadeh R, Golestani-fard F, Scrivener K (2015) Cement and Concrete Research Pozzolanic activity of mechanochemically and thermally activated kaolins in cement. Cem Concr Res 77:47–59. https://doi.org/10.1016/j.cemconres.2015.04.01710.1016/j.cemconres.2015.04.017 ↗
27. Vizcayno C, Gutiérrez RMD, Castello R, Rodriguez E, Guerrero CE (2010) Applied clay science pozzolan obtained by mechanochemical and thermal treatments of kaolin. Appl Clay Sci 49(4):405–413. https://doi.org/10.1016/j.clay.2009.09.00810.1016/j.clay.2009.09.008 ↗
28. Saikia NJ, Bharali DJ, Sengupta P, Bordoloi D, Goswamee RL, Saikia PC et al (2003) Characterization, beneficiation and utilization of a kaolinite clay from Assam. India. 24:93–103. https://doi.org/10.1016/S0169-1317(03)00151-010.1016/S0169-1317(03)00151-0 ↗
29. Vizcayno C, de Gutiérrez RM, Castello R, Rodriguez E, Guerrero CE (2010) Pozzolan obtained by mechanochemical and thermal treatments of kaolin. Appl Clay Sci 49(4):405–413. https://doi.org/10.1016/j.clay.2009.09.00810.1016/j.clay.2009.09.008 ↗
30. Zunino F, Boehm-Courjault E, Scrivener K (2020) The impact of calcite impurities in clays containing kaolinite on their reactivity in cement after calcination. Mater Struct/Mater et Constr; 53(2). https://doi.org/10.1617/s11527-020-01478-910.1617/s11527-020-01478-9 ↗
31. Sanchez-Soto PJ, Haro M, Perez-Maqueda LA, Varona I, Perez-Rodriguez J (2000) Effects of dry grinding on the structural changes of kaolinite powders, 57:1649–165710.1111/j.1151-2916.2000.tb01444.x ↗
32. Danner T (2013) Reactivity of calcined clays. NTNU
33. Alujas Diaz A, Almenares Reyes RS, Hanein T, Irassar EF, Juenger M, Kanavaris F, et al (2022) Properties and occurrence of clay resources for use as supplementary cementitious materials: a paper of RILEM TC 282-CCL. Mater Struct/Materiaux et Constr 55(5). https://doi.org/10.1617/s11527-022-01972-210.1617/s11527-022-01972-2 ↗
34. Maier M, Beuntner N (2020) Thienel KC (2021) Applied clay science mineralogical characterization and reactivity test of common clays suitable as supplementary cementitious material. Appl Clay Sci 2021(202):105990. https://doi.org/10.1016/j.clay.2021.10599010.1016/j.clay.2021.105990 ↗
35. Londono-Zuluaga D, Gholizadeh-Vayghan A, Winnefeld F, Avet F, Ben Haha M, Bernal SA, et al (2022) Report of RILEM TC 267-TRM phase 3: validation of the R3 reactivity test across a wide range of materials. Mater Struct 55(5). https://doi.org/10.1617/s11527-022-01947-310.1617/s11527-022-01947-3 ↗
36. Plusquellec G, Babaahmadi A, L’Hopital E, Mueller U (2021) Activated clays as supplementary cementitious material
37. Danner T, Norden G, Justnes H (2018) Characterisation of calcined raw clays suitable as supplementary cementitious materials. Appl Clay Sci 162(April):391–402. https://doi.org/10.1016/j.clay.2018.06.03010.1016/j.clay.2018.06.030 ↗
38. Snellings R, Almenares R, Theodore R, Irassar EF, Kanavaris F, Maier M, et al. (2022) Paper of RILEM TC 282-CCL: mineralogical characterization methods for clay resources intended for use as supplementary cementitious material. vol. 1. Springer Netherlands. Available from: https://DOIurl.org/10.1617/s11527-022-01973-110.1617/s11527-022-01973-1 ↗
39. Suraneni P, Weiss J (2017) Examining the pozzolanicity of supplementary cementitious materials using isothermal calorimetry and thermogravimetric analysis. Cement Concr Compos 10(83):273–278. https://doi.org/10.1016/J.CEMCONCOMP.2017.07.00910.1016/J.CEMCONCOMP.2017.07.009 ↗
40. Mark U, Anyakwo CN, Onyemaobi OO, Nwobodo CS (2019) Determination of the calcination procedure required to activate edda clay for optimal leaching of alumina. J Miner Mate Char Eng 07(02):49–63. https://doi.org/10.4236/jmmce.2019.7200410.4236/jmmce.2019.72004 ↗
41. Tole I, Habermehl-cwirzen K, Rajczakowska M, Cwirzen A (2018) Activation of a raw clay by mechanochemical process—effects of various parameters on the process efficiency and cementitious properties, 6–8. https://doi.org/10.3390/ma1110186010.3390/ma11101860 ↗
42. Maleki S, Karimi-Jashni A (2017) Effect of ball milling process on the structure of local clay and its adsorption performance for Ni(II) removal. Appl Clay Sci 137:213–224. https://doi.org/10.1016/j.clay.2016.12.00810.1016/j.clay.2016.12.008 ↗
43. Zanelli C, Iglesias C, Domínguez E, Gardini D, Raimondo M, Guarini G et al (2015) Mineralogical composition and particle size distribution as a key to understand the technological properties of Ukrainian ball clays. Appl Clay Sci 5(108):102–110. https://doi.org/10.1016/j.clay.2015.02.00510.1016/j.clay.2015.02.005 ↗
44. Fitos M, Badogiannis EG, Tsivilis SG, Perraki M (2015) Pozzolanic activity of thermally and mechanically treated kaolins of hydrothermal origin. Appl Clay Sci 116–117:182–192. https://doi.org/10.1016/j.clay.2015.08.02810.1016/j.clay.2015.08.028 ↗
45. Karunadasa KSP, Manoratne CH, Pitawala HMTGA, Rajapakse RMG (2019) Thermal decomposition of calcium carbonate (calcite polymorph) as examined by in-situ high-temperature X-ray powder diffraction. J Phys Chem Solids 134(May):21–28. https://doi.org/10.1016/j.jpcs.2019.05.02310.1016/j.jpcs.2019.05.023 ↗
46. Kuila U, Prasad M (2013) Specific surface area and pore-size distribution in clays and shales. 341–362. https://doi.org/10.1111/1365-2478.1202810.1111/1365-2478.12028 ↗
47. Yanguatin H, Ramírez JH, Tironi A, Tobón JI (2019) Effect of thermal treatment on pozzolanic activity of excavated waste clays. Constr Build Mater 211:814–823. https://doi.org/10.1016/j.conbuildmat.2019.03.30010.1016/j.conbuildmat.2019.03.300 ↗
48. Shui K, Yuan K, Sun T, Li Q, Zeng W (2015) Calcined clays for sustainable concrete
49. Johnston CJ, Pepper RA, Martens WN Couperthwaite S (2022) Improvement of aluminium extraction from low-grade kaolinite by iron oxide impurities: Role of clay chemistry and morphology. Miner Eng 176(Dec 2021):107346. https://doi.org/10.1016/j.mineng.2021.10734610.1016/j.mineng.2021.107346 ↗
50. Erlström M, Pusch R (1987) Survey of Swedish buffer material candi-dates and methods for characterization
51. Ortega A, Gotor FJ (2010) The multistep nature of the kaolinite dehydroxylation: kinetics and mechanism 203(26073):197–203. https://doi.org/10.1111/j.1551-2916.2009.03328.x10.1111/j.1551-2916.2009.03328.x ↗
52. Garg N, Skibsted J (2015) Pozzolanic reactivity of a calcined interstratified illite/smectite. Cem Concr Res. https://doi.org/10.1016/j.cemconres.2015.08.00610.1016/j.cemconres.2015.08.006 ↗
53. Snellings R, Li X, Avet F, Scrivener K (2019) Rapid, robust, and relevant (R3) reactivity test for supplementary cementitious materials. ACI Mater J 116(4):155–162. https://doi.org/10.14359/5171671910.14359/51716719 ↗