On the solidification behaviour and cracking origin of a nickel-based superalloy during selective laser melting
Source abstract
Abstract
Abstract Inconel 738LC samples were fabricated by selective laser melting (SLM) using different laser powers and scanning speeds and investigated using a range of characterisation techniques. High melting point Al-, Si- and W-based oxide particles and γ cellular structure were observed in the as-fabricated samples, implying that the solidification of the alloy melt during SLM may have started with preferential nucleation of oxide particles, followed by the widespread nucleation and growth of γ cellular structure. Cracks in the as-fabricated samples are associated with pores, or Al-, Si- and W-based oxide particles and small grains along some large grain boundaries (GBs). Those pores with sharp corners or rugged inner surfaces are particularly prone to cracking development during SLM. Most of the cracks were developed at γ grain-oxide interfaces or along the central line of oxide clusters, which is attributed to solidification contraction and thermal shrinkage of the grains that are associated with oxides. Nano-indentation tests show that Si/W/O-rich GB regions demonstrate a significantly higher hardness as compared with γ matrix, indicating that the segregation of Si, W and O has caused embrittlement to the GBs. Large misorientation was observed between grains (large or small) that are either associated with cracks or not, suggesting that large grain misorientation does not inevitably lead to cracking development in the current material. Small grains present along large grain boundaries were found to act as crack initiation sites or affect crack propagation path.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Laser-induced spectroscopy and plasma
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Microstructure characteristics of Inconel 625 superalloy manufactured by selective laser melting10.1016/j.jmst.2014.09.020 ↗
2. Microstructure evolution characteristics of Inconel 625 alloy from selective laser melting to heat treatment10.1016/j.msea.2017.08.058 ↗
3. Effect of Ti addition on cracking and microhardness of Inconel 625 during the laser solid forming processing10.1016/j.jallcom.2017.03.355 ↗
4. Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting10.1016/j.actamat.2011.12.032 ↗
5. The microstructure and mechanical properties of deposited IN718 by selective laser melting10.1016/j.jallcom.2011.10.107 ↗
6. Dendritic microstructure and hot cracking of laser additive manufactured Inconel 718 under improved base cooling10.1016/j.jallcom.2016.01.250 ↗
7. Numerical modeling of microstructure evolution during laser additive manufacturing of a nickel-based superalloy10.1016/j.actamat.2014.05.039 ↗
8. Effect of minor alloying elements on crack-formation characteristics of Hastelloy-X manufactured by selective laser melting
9. Reduction of micro-cracking in nickel superalloys processed by Selective Laser Melting: a fundamental alloy design approach10.1016/j.actamat.2015.04.035 ↗
10. Boundary liquation and interface cracking characterization in laser deposition of Inconel 738 on directionally solidified Ni-based superalloy10.1016/j.scriptamat.2005.03.047 ↗
11. Processability of different IN738LC powder batches by selective laser melting10.1016/j.jmatprotec.2015.09.046 ↗
12. Investigations on the microstructure and crack formation of IN738LC samples processed by selective laser melting using Gaussian and doughnut profiles10.1016/j.matdes.2015.10.027 ↗
13. Fractal scan strategies for selective laser melting of ‘unweldable’ nickel superalloys
14. The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy10.1016/j.jallcom.2014.06.172 ↗
15. Microstructure of selective laser melted CM247LC nickel-based superalloy and its evolution through heat treatment10.1016/j.matchar.2016.02.004 ↗
16. Microstructure of the nickel-base superalloy CMSX-4 fabricated by selective electron beam melting10.1007/s11661-015-3300-y ↗
17. Microstructures of Rene 142 nickel-based superalloy fabricated by electron beam melting10.1016/j.actamat.2013.04.002 ↗
18. Cracking behavior and control of Rene 104 superalloy produced by direct laser fabrication10.1016/j.jmatprotec.2015.06.002 ↗
19. Chauvet · Acta Mater. · 2018 · 142 · 8210.1016/j.actamat.2017.09.047 ↗
20. Solidification and liquation cracking issues in welding10.1007/s11837-003-0137-4 ↗
21. Solidification cracking of superalloy single- and bi-crystals10.1016/j.actamat.2004.03.047 ↗
22. Microstructure and yield strength of SLM-fabricated CM247LC Ni-superalloy10.1016/j.actamat.2017.02.007 ↗
23. Causes analysis on cracks in nickel-based single crystal superalloy fabricated by laser powder deposition additive manufacturing10.1016/j.matdes.2018.10.042 ↗
24. The Al-O (aluminum-oxygen) system10.1007/BF02887157 ↗
25. Mechanical properties of sputtered silicon oxynitride films by nanoindentation10.1016/j.msea.2008.01.063 ↗
26. Mechanical properties of SiO2 and Si3N4 coatings: a BAM/NIST co-operative project10.1016/S0040-6090(98)00989-4 ↗
27. Robust procedure of data analysis for micro/nano indentation10.1016/j.precisioneng.2012.11.003 ↗
28. Deformation model of brittle and ductile materials under nano-indentation10.1016/j.matdes.2008.07.028 ↗
29. Synthesis, structural and mechanical characterization of sputtered tungsten oxide coatings10.1016/j.tsf.2005.12.299 ↗
30. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
31. Lanthanum hydride doped tungsten-based coating fabricated by supersonic atmospheric plasma spraying10.1016/j.surfcoat.2016.05.012 ↗
32. Effect of minor elements of hot-cracking tendencies of Inconel 600
33. Weldability of high-strength, low-expansion superalloys
34. The effect of silicon on the microstructure and segregation of directionally solidified IN738 superalloy10.1080/09603409.1994.11752532 ↗
35. Effect of silicon on grain boundary carbide precipitation and properties of a cobalt-free wrought nickel-base superalloy
36. Liquation of various phases in HAZ during welding of cast Inconel 738LC10.1179/026708304225019948 ↗
37. The O-Si (oxygen-silicon) system10.1007/BF02841583 ↗
38. The O-W (oxygen-tungsten) system10.1007/BF02877593 ↗
39. The structure of rapidly quenched nickel-based superalloy ribbons produced by melt spinning