journal article·2005-05

Effect of interface microstructure on the bond strength of the diffusion welded joints between titanium and stainless steel

M. Ghosh, S. Chatterjee

Materials Characterization· Volume 54· Issue 4-5
Publisher page

Abstract

Abstract Diffusion bonding between commercially pure titanium and 304 stainless steel was carried out at a temperature of 950 °C for 30–120 min under uniaxial load in a vacuum. The diffusion bonds were characterized by optical and scanning electron microscopy. The diffusion zone contained different reaction bands and their chemical composition was determined using energy dispersive X-ray spectroscopy. The concentration of chemical species indicated the presence of σ, λ, χ, FeTi, β-Ti and Fe2Ti4O phases in the reaction zone and their existence was confirmed by X-ray diffraction. A maximum bond strength of ∼71% of that of titanium along with 5.8% ductility were obtained for the diffusion couple processed for 30 min due to formation of finer size intermetallics. A rise in joining time increases void generation and growth of intermetallic compounds, which are responsible for a drastic fall in the strength value.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Hydrogen embrittlement and corrosion behaviors in metals · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. The evolution of microstructure and diffusion path in the titanium-steel explosion weld interface during heat treatment10.1016/0022-5088(90)90347-M ↗
2. Microanalysis of diffusion bonds between 18:8 stainless steel and titanium
3. Characterization of transition joints of commercially pure titanium to 304 stainless steel10.1016/S1044-5803(02)00306-6 ↗
4. Improved mechanical properties in dissimilar Ti–AISI 304L joints10.1007/BF00367903 ↗
5. Interface microstructures in diffusion bonding of titanium alloys to stainless and low alloy steels10.1179/mst.1993.9.8.633 ↗
6. Effects of reaction products on the bond strength of the transition joint formed between Ti and stainless steel10.1179/026708304225010479 ↗
7. Diffusion bonding between Ti–6Al–4V alloy and micro duplex stainless with copper interlayer10.1179/026708301125000230 ↗
8. Improving tensile strength and bend ductility of titanium/AISI 304 L stainless steel friction welds10.1179/mst.1992.8.3.219 ↗
9. Solid-state diffusion bonding of commercially pure titanium to stainless steel
10. Villars · 1995
11. Interdiffusion studies in titanium–304 stainless steel system10.1016/S0022-3115(98)00179-2 ↗
12. Diffusion welding of Ti/Ti and Ti/stainless steel rods under phase transformation in air10.1179/mst.1986.2.4.405 ↗
13. The microstructure of diffusion-bonded Ti/Ni interface10.2320/matertrans1960.29.116 ↗
14. Diffusion bonding of microduplex stainless steel to Ti–6Al–4V10.1016/S1359-6462(01)01041-7 ↗