Experimental investigation of laser scan strategy on the microstructure and properties of Inconel 718 parts fabricated by laser powder bed fusion
Source abstract
Abstract
Inconel 718 (IN718) is a nickel-based superalloy which exhibits excellent tensile and impact resistant properties along with good corrosion resistance at high temperatures. However, due to the high toughness and work hardening, the machinability of this superalloy is low. Therefore, the selective laser melting (SLM) process has been adopted as an efficient technique to fabricate IN718 parts as it overcomes the problems associated with conventional manufacturing of superalloys. In the SLM process, various process parameters like scan strategy, laser power, scan speed, and energy density are defined for the fabrication to regulate the microstructure and thus control the mechanical properties like tensile strength, yield strength, impact strength, and hardness. In the SLM process, the thermal cycles induce residual stress into the part. These residual stresses can be detrimental to the microstructure and hence mechanical properties of the part. Residual stresses lead to warping of the part during the fabrication process, thereby leading to failure of the component. Although each process parameter has an independent and definitive effect on the overall mechanical and metallurgical properties, scan strategy is an independent process parameter which directly affects the level of residual stresses, microstructure, and mechanical properties of the SLM part, as the heat zones in part can be shifted from one location to another by varying the scan strategy. This variation in the area of the heat-affected zone determines the grain size ranging from equiaxed to elongated. Hence, the scan strategy is the only parameter that is varied for this study. The various scan strategies adopted here are chess, striped, flow-optimized, and customized scan strategies. In this study, the microstructural evaluation was deduced, followed by compositional analysis and hardness tests on the SLM fabricated parts. The residual stress of the parts was then determined using the hardness method. This effort was undertaken to identify the effect of scan strategy on residual stress and to discuss the metallurgical interactions between the mechanical and microstructural properties within the IN718 superalloy.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Mechanism of intermediate temperature embrittlement of Ni and Ni-based superalloys10.1080/10408436.2011.613492 ↗
2. Alloy 718 at Pratt & Whitney–Historical perspective and future challenges
3. Sequential laser and mechanical micro-drilling of Ni superalloy for aerospace application10.1016/j.cirp.2010.03.011 ↗
4. Effect of IN718 recycled powder reuse on properties of parts manufactured by means of selective laser melting10.1016/j.phpro.2014.08.152 ↗
5. The status and prospects of alloy 718
6. Deng · 2018
7. Superalloys: a technical guide
8. Bowman · 2000
9. Seitz · 2016
10. Bhadeshia · 2016
11. Coherency strengthening in Ni base alloys hardened by DO22 γ’ precipitates10.1007/BF02642938 ↗
12. Delta phase precipitation in Inconel 71810.1016/j.matchar.2004.07.004 ↗
13. Microstructures and mechanical properties of Inconel 718 welds by CO2 laser welding10.1016/j.jmatprotec.2007.11.224 ↗
14. Mechanical and microstructural investigation of nickel-based Superalloy IN718 manufactured by selective laser melting (SLM)10.1002/adem.201500158 ↗
15. Selective laser melting additive manufacturing of Inconel 718 superalloy parts: densification, microstructure and properties
16. Microstructure and mechanical properties of Inconel 718 produced by SLM and subsequent heat treatment10.4028/www.scientific.net/KEM.651-653.665 ↗
17. Effect of standard heat treatment on the microstructure and mechanical properties of selective laser melting manufactured Inconel 718 superalloy10.1016/j.msea.2015.06.021 ↗
18. Material evaluation and process selection, process
19. Achieving superelasticity in additively manufactured NiTi in compression without post-process heat treatment
20. Carlson · 1989
21. Anisotropic tensile and actuation properties of NiTi fabricated with selective laser melting10.1016/j.msea.2018.03.072 ↗
22. Effect of standard heat treatment on the microstructure and mechanical properties of hot isostatically pressed superalloy Inconel 71810.1016/S0921-5093(03)00079-0 ↗
23. High speed machining of Inconel 718 focusing on tool surface topography of CBN tool10.1016/j.promfg.2015.09.010 ↗
24. Tool-life and wear mechanisms of CBN tools in machining of Inconel 71810.1016/j.ijmachtools.2006.09.031 ↗
25. Comparison the machinability of Inconel 718, Inconel 625 and Monel 400 in hot turning operation, engineering science and technology, an
26. Numerical prediction of heat affected layer in the EDM of aeronautical alloys10.1016/j.apsusc.2012.07.124 ↗
27. Mechanical behavior of post-processed Inconel 718 manufactured through the electron beam melting process10.1016/j.msea.2016.10.069 ↗
28. Laser metal deposition of Inconel 718 Alloy and As-built mechanical properties compared to casting10.3390/ma14020437 ↗
29. A critical review of the material characteristics of additive manufactured IN718 for high-temperature application10.3390/met10121576 ↗
30. The microstructure and mechanical properties of deposited-IN718 by selective laser melting10.1016/j.jallcom.2011.10.107 ↗
31. Anisotropic tensile behavior of in situ precipitation strengthened Inconel 718 fabricated by additive manufacturing10.1016/j.msea.2017.06.098 ↗
32. Knowledge of process-structure-property relationships to engineer better heat treatments for laser powder bed fusion additive manufactured Inconel 71810.1016/j.addma.2019.100977 ↗
33. Influence of modified processing on structure and properties of hot isostatically pressed superalloy Inconel 71810.1016/j.msea.2005.11.031 ↗
34. Effect of oxygen content of powder on microstructure and mechanical properties of hot isostatically pressed superalloy Inconel 71810.1016/j.msea.2006.07.053 ↗
35. On the effects of selective laser melting process parameters on microstructure and thermomechanical response of Ni-rich NiTi10.1016/j.actamat.2017.10.072 ↗
36. Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium10.1016/j.actamat.2012.04.006 ↗
37. High density selective laser melting of Waspaloy®10.1016/j.jmatprotec.2007.04.117 ↗
38. Residual stresses in selective laser sintering and selective laser melting10.1108/13552540610707013 ↗
39. The microstructure and mechanical properties of deposited-IN718 by selective laser melting10.1016/j.jallcom.2012.06.016 ↗
40. Study on variations of microstructure and metallurgical properties in various heat-affected zones of SLM fabricated nickel-titanium alloy10.1016/j.msea.2020.138919 ↗
41. Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting10.1016/j.actamat.2011.12.032 ↗
42. Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting10.1016/j.msea.2015.05.035 ↗
43. Microstructural design of Ni-base alloys for high-temperature applications: impact of heat treatment on microstructure and mechanical properties after selective laser melting10.1007/s40964-016-0013-8 ↗
44. Superior creep strength of a nickel-based superalloy produced by selective laser melting10.1016/j.msea.2016.07.061 ↗
45. Munaganuru · 2018
46. On the microstructural and mechanical properties of post-treated additively manufactured Inconel 718 superalloy under quasistatic and cyclic loading10.1016/j.msea.2016.05.089 ↗
47. Gong · 2015
48. Investigation on reducing distortion by preheating during manufacture of aluminum components using selective laser melting10.2351/1.4828755 ↗
49. Optimizing quality of additively manufactured Inconel 718 using powder bed laser melting process10.1016/j.addma.2016.03.006 ↗
50. Effects of laser processing parameters on thermal behavior and melting/solidification mechanism during selective laser melting of TiC/Inconel 718 composites10.1016/j.optlastec.2016.04.009 ↗
51. Han · 2018
52. Characteristics of typical geometrical features shaped by selective laser melting10.2351/1.4980164 ↗
53. Li · 2018 · 348
54. Wei Gao · 2015 · 65
55. Mugwagwa · 2018 · 92
56. Processing parameter effects on residual stress and mechanical properties of selective laser melted Ti6Al4V
57. 2019 · 481
58. Determination of the effect of scan strategy on residual stress in laser
59. Effect of scanning strategy on mechanical properties of selective laser melted Inconel 71810.1016/j.msea.2019.03.007 ↗
60. Wang · 2018
61. Effect of scanning strategy on grain structure and crystallographic texture of Inconel 718 processed by selective laser melting
62. 2022
63. Rasband · 2012
64. Ravichander · 2020 · 10
65. A method to estimate residual stress in metal parts made by selective laser melting
66. Effect of heat treatment on the modification of microstructure of selective laser melted (SLM) IN718 and its consequences on mechanical behavior10.1557/jmr.2020.129 ↗
67. Study on the microstructure, mechanical property and residual stress of SLM Inconel-718 alloy manufactured by differing island scanning strategy10.1016/j.optlastec.2015.07.009 ↗
68. Effect of hatch length on the development of microstructure, texture and residual stresses in selective laser melted superalloy Inconel 71810.1016/j.matdes.2017.08.049 ↗