Deformation field and texture analysis in friction-assisted lateral extrusion of aluminum
Source abstract
Abstract
A new flow line model was developed based on experimental observations to describe the deformation field and texture evolution in a novel severe plastic deformation (SPD) technique, named the Friction-Assisted Lateral Extrusion Process (FALEP). FALEP produces a sheet from bulk metal in one step. The microstructure and crystallographic texture of Al-1050 material after FALEP deformation were investigated by EBSD and XRD after an extrusion ratio of 10.5. Heterogeneity in the microstructure and texture was observed within the thickness of the sheet with average grain sizes of 720 nm and 4.2 μm near the top of the obtained sheet and the bottom, respectively. Flow lines were ascribed within split-samples before testing. They revealed large deviations from the expected simple shear model; three-stage deformation paths were observed. They consisted of two simple shear stages and a new linear convergent extrusion (‘LCE’) type of flow between them. An analytical flow line model was constructed for obtaining the deformation field for the LCE part of the flow. Texture simulations were carried out using the viscoplastic Taylor and the viscoplastic self-consistent models. The classical simple shear model was not able to properly reproduce the experimental textures. However, the new flow line model accurately described the texture evolution both at the top and bottom regions of the sheet. The obtained total strains were more than twice less than the one expected from the classical uniform simple shear deformation model. • Measured flow lines showed three-stages in FALEP at an extrusion ratio of 10.5. • The microstructure and texture showed gradient within the obtained sheet thickness. • The proposed new flow line model reproduced the texture up to 86.3 % precision. • For high grain fragmentation, the Taylor model applied for texture prediction. • At low grain fragmentation the self-consistent model worked for texture simulation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Producing bulk ultrafine-grained materials by severe plastic deformation: ten years later10.1007/s11837-016-1820-6 ↗
2. Nanomaterials by severe plastic deformation: review of historical developments and recent advances10.1080/21663831.2022.2029779 ↗
3. Principles of equal-channel angular pressing as a processing tool for grain refinement10.1016/j.pmatsci.2006.02.003 ↗
4. Using high-pressure torsion for metal processing: fundamentals and applications10.1016/j.pmatsci.2008.03.002 ↗
5. ARB (accumulative roll-bonding) and other new techniques to produce bulk ultrafine grained materials10.1002/adem.200310077 ↗
6. Equal-Channel angular extrusion (ECAE): from a laboratory curiosity to an industrial technology10.3390/met10020244 ↗
7. The role of back-pressure in equal channel angular extrusion10.1007/s10853-005-6088-0 ↗
8. Deformation field variations in equal channel angular extrusion due to back pressure10.1016/j.scriptamat.2007.12.018 ↗
9. Segal · 2017
10. A new design for equal channel angular extrusion10.1016/j.jmatprotec.2005.11.007 ↗
11. Frint · Mater. Des. · 2016 · 97 · 50210.1016/j.matdes.2016.02.067 ↗
12. Segal · 1994 · 232
13. Mechanics of continuous equal-channel angular extrusion10.1016/j.jmatprotec.2009.11.001 ↗
14. Non-equal channel angular pressing of aluminum alloy10.1016/j.scriptamat.2009.09.006 ↗
15. Principles of Nonequal Channel angular pressing
16. Friction—assisted extrusion of thin strips of aluminium composite material from powder metals10.1016/S0007-8506(07)61204-9 ↗
17. Development of friction-assisted extrusion process for producing thin metal strips
18. Microstructure, texture and mechanical properties in aluminum produced by friction-assisted lateral extrusion10.3390/ma14092465 ↗
19. Room-temperature single-step production of ultrafine-grained bulk metallic sheets from Al powder10.1115/1.4062582 ↗
20. The mechanics of the friction-assisted lateral extrusion process
21. Deformation field and texture analysis in T-ECAP using a flow function10.1016/j.matchar.2021.110912 ↗
22. B. Beausir, J. Fundenberger · 2017
23. A fan-type flow-line model in equal channel angular extrusion10.1016/j.scriptamat.2009.02.045 ↗
24. Plastic flow during equal-channel angular pressing with arbitrary tool angles10.1016/j.ijplas.2020.102755 ↗
25. An upper-bound solution of channel angular deformation10.1016/S1359-6462(00)00377-8 ↗
26. A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: application to zirconium alloys10.1016/0956-7151(93)90130-K ↗
27. Geometrically necessary dislocations favor the Taylor uniform deformation mode in ultra-fine-grained polycrystals10.1016/j.actamat.2016.06.062 ↗
28. Grain size dependent texture evolution in severely rolled pure copper10.1016/j.matchar.2015.02.003 ↗
29. Microstructure and strain in protrusions formed during severe plastic deformation of aluminum10.1016/j.matlet.2015.07.008 ↗