journal article·2025-11Open access

Microstructure and mechanical properties of parts produced by laser powder bed fusion of AlSi10Mg powder with coarse particle size

F.N. Depboylu, O.V. Mishin, T. Leissner, A.A. Popa

Abstract

Powder size and morphology play a central role in laser powder bed fusion of metallic components, influencing the process stability, microstructure, and mechanical properties. In the pursuit of more efficient production, coarse powders (~90 μm and greater) have become commercially available, enabling increased layer thickness and build rate. For AlSi10Mg, only limited data exist on how such coarse powders perform during additive manufacturing in medium-wattage (400 W) systems and on what microstructures and mechanical properties can be achieved in parts 3D-printed using these powders. The present study addresses this gap by characterizing parts produced using NExP-1 AlSi10Mg, a novel non-combustible and non-explosible powder with uniform spherical morphology and a median size of ~90 μm. The microstructure and tensile properties have been assessed in samples manufactured using three distinct combinations of process parameters, resulting in relative densities of 97.5–99.6 % (measured using Archimedes' principle). Results obtained in this study show that an increased hatch distance at a low scan speed significantly reduces the relative density due to lack-of-fusion porosity, which leads to decreased strength and ductility compared to those in a sample with the highest density. The pore population characterized using micro-computed tomography is found to be related to sample density: the highest-density sample primarily contains isolated pores, whereas lower-density samples display higher frequences of interconnected pores. This work provides new insights into the potential of coarse AlSi10Mg powders and serves as the basis for further process optimization for demanding industrial applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Engineering Technology and Methodologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Process parameters effect and porosity reduction on AlSi10Mg parts manufactured by selective laser melting10.1007/s00170-023-12521-8 ↗
2. Research on the thermal behaviour of a selectively laser melted Aluminium alloy: simulation and experiment10.3390/ma11071172 ↗
3. Thermal properties of selectively laser-melted AlSi10Mg products with different densities10.1007/s11665-020-05192-z ↗
4. Experimental investigations of inhomogeneous component properties in laser-based additive manufacturing of AlSi10Mg
5. Role of powder particle size on laser powder bed fusion processability of AlSi10mg alloy
6. Influence of powder size on defect generation in laser powder bed fusion of AlSi10Mg alloy10.1016/j.jmapro.2023.03.046 ↗
7. Linking powder properties, printing parameters, post-processing methods, and fatigue properties in additive manufacturing of AlSi10Mg10.3390/alloys1020010 ↗
8. P. Process optimization and microstructural analysis for selective laser melting of AlSi10Mg
9. Powder bed layer characteristics: the overseen first-order process input10.1007/s11661-016-3470-2 ↗
10. Degradation of AlSi10Mg powder during laser based powder bed fusion processing10.1016/j.matdes.2020.109358 ↗
11. Laser powder bed fusion: a state-of-the-art review of the technology, materials, properties & defects, and numerical modelling10.1016/j.jmrt.2022.07.121 ↗
12. On the limitations of volumetric energy density as a design parameter for selective laser melting10.1016/j.matdes.2016.10.037 ↗
13. Depboylu · 2024
14. A catastrophic aluminium-alloy dust explosion in China10.1016/j.jlp.2015.11.013 ↗
15. Combustion characteristics of pure aluminum and aluminum alloys powders10.1016/j.jlp.2020.104270 ↗
16. AlSi10Mg plate-lattice structures fabricated by laser powder bed fusion exhibiting high specific energy absorption10.1016/j.matdes.2025.114395 ↗
17. Classification and quantification of pore shapes in sandstone reservoir rocks with 3-D X-ray micro-computed tomography10.5194/se-7-285-2016 ↗
18. X-ray microcomputed tomography in additive manufacturing: a review of the current technology and applications, 3D
19. Ductilization of selective laser melted Ti6Al4V alloy by friction stir processing10.1016/j.msea.2019.03.133 ↗
20. PoreSpy: a Python toolkit for quantitative analysis of porous media images10.21105/joss.01296 ↗
21. Scikit-learn: machine learning in Python, the
22. PyVista: 3D plotting and mesh analysis through a streamlined interface for the visualization toolkit (VTK)10.21105/joss.01450 ↗
23. Thin-walled commercially pure titanium structures: laser powder bed fusion process parameter optimization10.3390/machines11020272 ↗
24. Classifying shape of internal pores within AlSi10Mg alloy manufactured by laser powder bed fusion using 3D X-ray micro computed tomography: influence of processing parameters and heat treatment10.1016/j.matchar.2020.110225 ↗
25. Particle shape: a review and new methods of characterization and classification10.1111/j.1365-3091.2007.00892.x ↗
26. Acoustic properties in travertines and their relation to porosity and pore types10.1016/j.marpetgeo.2014.09.004 ↗
27. Study of volumetric energy density limitations on the IN718 mesostructure and microstructure IN laser powder bed fusion process10.1016/j.jmapro.2021.02.043 ↗
28. Microstructural evolution and EBSD analysis of AlSi10Mg alloy fabricated by selective laser remelting10.1016/j.matchar.2019.110079 ↗
29. Mechanical properties of AlSi10Mg processed by laser powder bed fusion at elevated temperature, minerals
30. X-ray computed tomography vs Archimedes method: a head-to-head comparison.MATEC
31. Porosity testing methods for the quality assessment of selective laser melted parts10.1016/j.cirp.2016.04.054 ↗
32. Oxides, porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting10.1016/j.ijfatigue.2016.06.002 ↗
33. Understanding melt pool characteristics in laser powder bed fusion: an overview of single- and multi-track melt pools for process optimization10.1016/j.apmate.2023.100137 ↗
34. Effect of process parameters on melt Pool characteristics and solidification process during laser powder bed fusion of AlSi10Mg alloy10.1007/s40516-023-00243-4 ↗
35. Integrated control of melt Pool geometry and microstructure in laser powder bed fusion of AlSi10Mg10.1007/s11661-018-4804-z ↗
36. Microstructure of selective laser melted AlSi10Mg alloy10.1016/j.matdes.2019.107677 ↗
37. Solidification of Al12Si melt Pool in laser powder bed fusion10.1007/s11665-023-08502-3 ↗
38. Effects of pore defects on stress concentration of laser melting deposition-manufactured AlSi10Mg via crystal plasticity finite element method10.3390/ma18102285 ↗
39. Effect of heat treatment on the anisotropy in mechanical properties of selective laser melted AlSi10Mg10.1016/j.msea.2022.144130 ↗
40. Fracture resistance of AlSi10Mg fabricated by laser powder bed fusion10.1016/j.actamat.2021.116869 ↗
41. Effects of build orientation and heat treatments on the tensile and fracture toughness properties of additively manufactured AlSi10Mg10.1016/j.ijmecsci.2021.106868 ↗
42. The microstructure and mechanical properties of selectively laser melted AlSi10Mg: the effect of a conventional T6-like heat treatment10.1016/j.msea.2016.04.092 ↗
43. Selective laser melting of AlSi10Mg alloy: process optimisation and mechanical properties development10.1016/j.matdes.2014.09.044 ↗
44. Linking microstructure and processing defects to mechanical properties of selectively laser melted AlSi10Mg alloy10.1016/j.tafmec.2018.09.011 ↗
45. Improved ductility by reducing powder size in laser powder bed fusion of AlSi10Mg10.1016/j.amf.2024.200122 ↗
46. Study of heat treatment parameters for additively manufactured AlSi10Mg in comparison with corresponding cast alloy10.1016/j.msea.2018.10.026 ↗