journal article·2025-12Open access

Influence of stearic acid on synthesis, microstructure and mechanical properties of a Fe-Cr-Ni ODS steel fabricated by mechanical alloying

Yi Cao, Jing Li, Liangyin Xiong, Shi Liu, Yiyi Li

Abstract

The fabrication of a Fe-15Cr-15Ni oxide dispersion strengthened (ODS) austenitic steel by a conventional mechanical alloying (MA) technique is presented herein. To obtain ODS austenitic steel with excellent performance, different amounts of stearic acid (SA) were introduced in the process of high-energy milling. The influence of SA content on the microstructure of as-milled powder and consolidated steel, together with on the mechanical properties of annealed steel were investigated. The results show that a balance between fracture, cold-welding and alloying is achieved at the addition of 0.6 wt% of SA, and thereby causes the predominant formation of fine Y 2 Ti 2 O 7 particles with pyrochlore structure in the consolidated steel, without the precipitation of coarse carbide and oxide inclusions. The uniformly distributed oxide nanoparticles and refined grains enable the ODS austenitic steel to exhibit superior mechanical strength at room temperature and 650 °C to non-ODS austenitic steels. Also, it is found that the alloying effect of Fe-15Cr-15Ni powder and the processability of ODS austenitic steel are very sensitive to the SA content.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Optimization of cold and warm workability in stainless steel type AISI 316L using instability maps10.1016/0022-3115(95)00154-9 ↗
2. Comparison of swelling and irradiation creep behavior of fcc-austenitic and bcc-ferritic/martensitic alloys at high neutron exposure10.1016/S0022-3115(99)00225-1 ↗
3. Annealing of cold-worked austenitic stainless steels10.2355/isijinternational.43.135 ↗
4. Fe-15Ni-13Cr austenitic stainless steels for fission and fusion reactor applications. I. Effects of minor alloying elements on precipitate phases in melt products and implication in alloy fabrication10.1016/S0022-3115(99)00234-2 ↗
5. Thermal creep properties of Ti-stabilized DIN 1.4970 (15-15Ti) austenitic stainless steel pressurized cladding tubes10.1016/j.jnucmat.2017.06.013 ↗
6. Austenitic oxide dispersion strengthened steels: a review10.14429/dsj.66.10205 ↗
7. Effects of cold rolling and heat treatment on microstructure and mechanical properties of 15Cr-15Ni ODS austenitic steel
8. Temperature dependent strengthening contributions in austenitic and ferritic ODS steels10.1016/j.msea.2020.139452 ↗
9. Microstructural observation and tensile properties of ODS-304 austenitic steel10.1016/j.msea.2012.08.099 ↗
10. Production, microstructure and mechanical properties of two different austenitic ODS steels10.1016/j.jnucmat.2017.02.034 ↗
11. High-temperature low-cycle fatigue behavior of novel austenitic ODS steels10.1016/j.ijfatigue.2016.08.018 ↗
12. Influence of process control agent and Al concentration on synthesis and phase stability of a mechanically alloyed AlxCoCrFeMnNi high-entropy alloy10.1016/j.jallcom.2021.160770 ↗
13. Mechanical alloying: a novel technique to synthesize advanced materials
14. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
15. Effect of process control agent on microstructures and high-temperature oxidation behavior of a nickel-based ODS alloy10.3390/met12061029 ↗
16. Effect of mechanical alloying and consolidation process on microstructure and hardness of nanostructured Fe-Cr-Al ODS alloys10.1016/j.msea.2011.08.041 ↗
17. Thermal analysis and microstructure of oxide dispersion strengthened ferritic steels produced by ball milling with different amounts of process control agent10.1007/s10973-019-08593-y ↗
18. Effect of process control agent on the microstructure of Ni-based ODS superalloy produced by mechanical alloying and sintering10.24425/amm.2019.129478 ↗
19. Synthesizing aluminum alloys by double mechanical alloying10.1007/BF03221427 ↗
20. Influence of milling conditions on the FeAl intermetallic formation by mechanical alloying10.1016/0921-5093(96)80006-2 ↗
21. Microstructural evolution of a titanium-stablilized 15Cr-15Ni steel10.1016/0001-6160(86)90217-8 ↗
22. Surfactants in mechanical alloying/milling: a catch-22 situation10.1080/10408436.2013.808985 ↗
23. Effects of milling parameters on the microstructure and Charpy impact properties of MA/ODS ferritic steels10.1016/j.fusengdes.2017.10.025 ↗
24. Improvement of 9Cr-ODS martensitic steel properties by controlling excess oxygen and titanium contents10.1016/j.jnucmat.2004.04.043 ↗
25. Development of oxide dispersed austenitic stainless steel through mechanical alloying and spark plasma sintering10.1007/s11665-022-06947-6 ↗
26. Incidence of mechanical alloying contamination on oxides and carbides formation in ODS ferritic steels10.1016/j.jnucmat.2013.03.090 ↗
27. Microstructure and mechanical properties of FeCoCrNiMnAlx high-entropy alloys prepared by mechanical alloying and hot-pressed sintering10.1016/j.jallcom.2018.10.168 ↗
28. Recent progress in developing and qualifying nanostructured ferritic alloys for advanced fission and fusion applications10.1007/s11837-014-1207-5 ↗
29. Evaluation of mechanical properties and nano-meso structures of 9–11%Cr ODS steels10.1016/j.jnucmat.2013.04.006 ↗
30. Production and properties of nano-scale oxide dispersion strengthened (ODS) 9Cr martensitic steel claddings10.2355/isijinternational.43.2038 ↗
31. Austenitic-steel elastic constants
32. High temperature tensile properties and fracture characteristics of bimodal 12Cr-ODS steel10.1016/j.jnucmat.2015.11.013 ↗
33. Microstructure characterization and strengthening mechanisms of oxide dispersion strengthened (ODS) Fe-9%Cr and Fe-14%Cr extruded bars10.1016/j.jnucmat.2017.07.060 ↗
34. Evolution of oxide nanoparticles during thermomechanical processing and its influence on mechanical properties of a 12Cr ODS alloy10.1016/j.jmst.2024.12.049 ↗
35. Cold swaging, recovery and recrystallization of oligocrystalline Incoloy MA 956-part II: annealed state10.2355/isijinternational.44.1902 ↗
36. Deuterium transport behavior of 15-15Ti stainless steel for nuclear structural material in gen-IV reactors10.1016/j.ijhydene.2023.09.233 ↗
37. A comparison of AISI type 316 and German type DIN 1.4970 stainless steel with regard to the first-wall lifetime10.1016/0022-3115(82)90584-0 ↗
38. The influence of multi-scale second-phase particles on micro-crack initiation and propagation in Al-Zn-Mg-Cu alloy10.1016/j.vacuum.2024.113044 ↗
39. Microstructures and tensile properties of an austenitic ODS heat resistance steel10.1016/j.msea.2019.138419 ↗
40. Enhanced strength and high temperature resistance of 25Cr20Ni ODS austenitic alloy through thermo-mechanical treatment and addition of Mo10.1016/j.fusengdes.2018.11.020 ↗
41. Effects of process-control agents on mechanical alloying of nanostructured aluminium alloys10.1007/s11661-003-0217-7 ↗
42. Decomposition of process control agent during mechanical milling and its influence on displacement reactions in the Al-TiO2 system10.1016/j.matchemphys.2004.09.014 ↗
43. An investigation on the application of process control agents in the preparation and consolidation behavior of nanocrystalline silver by mechanochemical method10.1016/j.apt.2011.11.001 ↗
44. Particle surfaces and prior particle boundaries in Hf modified PM astroloy10.1179/pom.1984.27.3.141 ↗
45. Characterization of the prior particle boundaries in a powder metallurgy Ti2AlNb alloy10.1016/j.jmst.2019.04.036 ↗