journal article·2026-02

The double-aging induced secondary L12 nanoparticles-strengthened medium-entropy alloy exhibiting a good synergistic strength-ductility balance

Lei Wang, Chengxing Sun, Jiale Miao, Haoshuai Qiang, Jun Shen, Juntao Zou, Guojun Zhang

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: High Entropy Alloys Studies · High Temperature Alloys and Creep · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (77)

Show source-provided references
1. Temperature dependence of the mechanical properties of equiatomic solid solution MEAs with face-centered cubic crystal structures10.1016/j.actamat.2014.08.026 ↗
2. Composition dependent slip planarity in mechanically stable face centered cubic complex concentrated alloys and its mechanical effects10.1016/j.actamat.2021.117314 ↗
3. Recovery, recrystallization, grain growth and phase stability of a family of FCC-structured multi-component equiatomic solid solution alloys10.1016/j.intermet.2013.10.024 ↗
4. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
5. Heavy carbon alloyed FCC-structured high entropy alloy with excellent combination of strength and ductility10.1016/j.msea.2018.01.045 ↗
6. Polymorphism in a high-entropy alloy10.1038/ncomms15687 ↗
7. The effect of carbon on the microstructures, mechanical properties, and deformation mechanisms of thermomechanically treated Fe40.4Ni11.3Mn34.8Al7.5Cr6 high entropy alloys10.1016/j.actamat.2016.12.074 ↗
8. The role of carbon in grain refifinement of cast CrFeCoNi high-entropy alloys10.1007/s11661-018-4549-8 ↗
9. Ultrastrong medium-entropy single-phase alloys designed via severe lattice distortion10.1002/adma.201807142 ↗
10. Achieving excellent strength-ducyility synergy in twinned NiCoCr medium-entropy alloy via Al/Ta co-doping10.1016/j.jmst.2021.01.060 ↗
11. Design of ultrastrong but ductile medium-entropy alloy with controlled precipitations and heterogeneous grain structures
12. Achieving superior ductility with ultrahigh strength via deformation and strain hardening in the non-recrystallized regions of the heterogeneous-structured high-entropy alloy10.1016/j.actamat.2024.120572 ↗
13. Enhancing the strength-ductility trade-offin a NiCoCr-based medium-entropy alloy with the synergetic effect of ultra fine precipitates, stacking faults, dislocation locks and twins10.1016/j.scriptamat.2021.114497 ↗
14. Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys10.1126/science.aas8815 ↗
15. Ductilizing brittle high entropy alloys via tailoring valence electron concentrations of precipitates by controlled elemental partitioning10.1080/21663831.2018.1518276 ↗
16. Control of nanoscale precipitation and elimination of intermediate temperature embrittlement in multicomponent high-entropy alloys10.1016/j.actamat.2020.02.059 ↗
17. Nanoparticles-strengthened high-entropy alloys for cryogenic applications showing an exceptional strength-ductility synergy10.1016/j.scriptamat.2019.01.034 ↗
18. On the formation of hierarchical microstructure in a Mo-doped NiCoCr medium-entropy alloy with enhanced strength-ductility synergy10.1016/j.scriptamat.2019.08.036 ↗
19. Ta-doping induces heterogeneous microstructures in CoCrNi medium-entropy alloy to achieve excellent strength-ductility combination10.1016/j.msea.2023.145600 ↗
20. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
21. Strain partitioning enables excellent tensile ductility in precipitated heterogeneous high-entropy alloys with gigapascal yield strength10.1016/j.ijplas.2021.103022 ↗
22. Elemental partitioning as a route to design precipitation-hardened high entropy alloys10.1016/j.jmst.2020.09.021 ↗
23. Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy10.1016/j.actamat.2017.07.029 ↗
24. Anomalous precipitate-size-dependent ductility in multicomponent high-entropy alloys with dense nanoscale precipitates10.1016/j.actamat.2021.117480 ↗
25. Superior high-temperature properties and deformation-induced planar faults in a novel L12-strengthened high-entropy alloy10.1016/j.actamat.2020.02.028 ↗
26. A novel (CoFeNi)82Ti5Al5V8 medium entropy alloy showing an ultra yield strength and a good ductility by L12 nanoparticles strengthening and dislocation strengthening10.1016/j.msea.2024.146138 ↗
27. Design and high-strength origin of novel (CoFeNi)80Ti5V15 medium entropy alloy with “fcc+L12” structure10.1016/j.jmst.2023.01.002 ↗
28. Achieving an excellent strength-ductility synergy in a medium-entropy alloy by a suitable thermo-mechanical processing10.1016/j.intermet.2025.108828 ↗
29. L12 nanoparticles-strengthened Co2Ni2Cr medium entropy alloy showing an outstanding tensile property10.1016/j.matchar.2024.113744 ↗
30. Strength-ductility synergy and superior strain-hardening ability of Ni38Co25Fe13Cr10Al7Ti7 multi principal element alloy through heterogeneous L12 structure modulation10.1016/j.jallcom.2024.173916 ↗
31. Nano-precipitates strengthened non-equiatomic medium-entropy alloy with outstanding tensile properties10.1016/j.msea.2020.139218 ↗
32. Simultaneous enhancement of strength and ductility via microband formation and nanotwinning in an L12-strengthened alloy
33. Enhanced mechanical performance of grain boundary precipitation-hardened high-entropy alloys via a phase transformation at grain boundaries10.1016/j.jmst.2021.01.061 ↗
34. Dual-phase (η + L12) precipitation strengthening contributes to a good strength-ductility synergy in a novel (Co2Ni2Cr)92Ti4Mo4 medium-entropy alloy with a heterogeneous microstructure10.1016/j.msea.2025.148848 ↗
35. Stability of ordered L12 and B2 precipitates in face centered cubic based high entropy alloys- Al0.3CoFeCrNi and Al0.3CuFeCrNi210.1016/j.scriptamat.2016.06.019 ↗
36. L21-strengthened face-centered cubic high-entropy alloy with high strength and ductility10.1016/j.msea.2020.140056 ↗
37. Enhancing strength-ductility combination of Fe–Ni–Cr–Al–Ti high-entropy alloys via co-precipitation of sigma and L21 phases10.1016/j.msea.2024.147062 ↗
38. Non-monotonous effect of pre-strain on the precipitates and strengthening mechanisms of high-entropy alloys10.1016/j.jallcom.2022.164338 ↗
39. Ripening of L12 nanoparticles and their effects on mechanical properties of Ni28Co28Fe21Cr15Al4Ti4 high-entropy alloys10.1016/j.msea.2019.138803 ↗
40. Microstructure and mechanical behavior in a spherical L12 nanoprecipitates strengthened Ni35Co27.5Cr27.5Al5Ti5 high-entropy alloy fabricated by direct casting and heat treatment10.1016/j.jallcom.2024.175299 ↗
41. Discontinuous coarsening leads to unchanged tensile properties in high-entropy alloys with different recrystallization volume fractions10.1016/j.ijplas.2024.103963 ↗
42. Dynamic strain ageing of L12-strengthened Ni-Co base high-entropy alloy and unraveling its deformation mechanisms in strain ageing process10.1016/j.ijplas.2024.104151 ↗
43. Heterogeneous precipitation strengthened non-equiatomic NiCoFeAlTi medium entropy alloy with excellent mechanical properties10.1016/j.msea.2022.142617 ↗
44. High density of strong yet deformable intermetallic nanorods leads to an excellent room temperature strength-ductility combination in a high entropy alloy10.1016/j.actamat.2021.117234 ↗
45. Dual heterogeneous structures lead to ultrahigh strength and uniform ductility in a Co-Cr-Ni medium-entropy alloy10.1038/s41467-020-16085-z ↗
46. Achieving ultrahigh strength in CoCrNi-based medium-entropy alloys with synergistic strengthening effect10.1016/j.msea.2020.139028 ↗
47. Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases10.1016/j.actamat.2016.06.063 ↗
48. Spinodal decomposition induced nanoprecipitates strengthened CoCrNi-base medium entropy alloy10.1016/j.msea.2021.141674 ↗
49. A novel high-strength and high-ductility CoCrNi medium entropy alloy by Ti/Mo co-doping10.1016/j.matlet.2022.132929 ↗
50. On the compositional and structural redistribution during partial recrystallisation: a case of σ-phase precipitation in a Mo-doped NiCoCr medium-entropy alloy10.1016/j.scriptamat.2020.113662 ↗
51. Microstructure and mechanical properties of CoCrNi-Mo medium entropy alloys: experiments and first-principle calculations10.1016/j.jmst.2020.04.062 ↗
52. Heterogeneous banded precipitation of (CoCrNi)93Mo7 medium entropy alloys towards strength-ductility synergy utilizing compositional inhomogeneity10.1016/j.scriptamat.2019.07.026 ↗
53. Partially recrystallized heterostructure via Mo-doping endows CoCrNi medium-entropy alloy with exceptional strength and ductility10.1016/j.scriptamat.2024.116297 ↗
54. Achieving exceptional strength-ductility synergy in a complex-concentrated alloy via architected heterogeneous grains and nano-sized precipitates10.1016/j.ijplas.2022.103398 ↗
55. Hierarchical microstructure design to tune the mechanical behavior of an interstitial TRIP-TWIP high-entropy alloy10.1016/j.actamat.2018.10.017 ↗
56. Realizing strength-ductility combination of coarse-grained Al0.2Co1.5CrFeNi1.5Ti0.3 alloy via nano-sized, coherent precipitates10.1016/j.ijplas.2017.10.005 ↗
57. Realizing superior strength-ductility combination in dual-phase AlFeCoNiV high-entropy alloy through composition and microstructure design10.1080/21663831.2022.2093140 ↗
58. A ductile high entropy alloy strengthened by nano sigma phase10.1016/j.intermet.2020.106813 ↗
59. Double heterogeneous structures induced excellent strength-ductility synergy in Ni40Co30Cr20Al5Ti5 medium-entropy alloy10.1016/j.jmst.2023.10.011 ↗
60. Perspective on hetero-deformation induced (HDI) hardening and back stress10.1080/21663831.2019.1616331 ↗
61. Tailoring heterogeneities in high-entropy alloys to promote strength-ductility synergy10.1038/s41467-019-13311-1 ↗
62. Aged metastable high-entropy alloys with heterogeneous lamella structure for superior strength-ductility synergy10.1016/j.actamat.2020.08.043 ↗
63. Phase-selective recrystallization makes eutectic high-entropy alloys ultra-ductile10.1038/s41467-022-32444-4 ↗
64. Microstructure, mechanical property and strengthening mechanism analysis of drop-cast and thermo-mechanically processed Co31.5Fe18.5Ni31.5Al18.5 eutectic high-entropy alloy10.1016/j.jmst.2025.05.022 ↗
65. Deformation behavior and strengthening mechanism analysis of newly designed Co31.5Fe18.5Ni31.5Al18.5 eutectic high-entropy alloy by calculating solidification paths10.1016/j.msea.2025.148524 ↗
66. Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility10.1073/pnas.1517193112 ↗
67. Enhanced strength–ductility synergy in ultra-fine grained eutectic high-entropy alloys by inheriting microstructural lamellae10.1038/s41467-019-08460-2 ↗
68. Back stress strengthening and strain hardening in gradient structure10.1080/21663831.2016.1153004 ↗
69. Ultra-high tensile strength via precipitates and enhanced martensite transformation in a FeNiAlC alloy10.1016/j.msea.2020.140498 ↗
70. Effective and back stresses evolution upon cycling a high-entropy alloy10.1080/21663831.2022.2054667 ↗
71. Multiscale chemical ordering heterogeneity facilitates exceptional strength and ductility in additively manufactured Ti-added AlCoCrFeNi2.1 high-entropy alloys at intermediate temperatures10.1016/j.ijplas.2025.104373 ↗
72. New insight into tailorable eutectic high entropy alloys with remarkable strength–ductility synergy and ample shaping freedom fabricated using laser powder bed fusion
73. Designing heterostructured materials10.1038/s41563-025-02444-y ↗
74. Heterostructured materials10.1016/j.pmatsci.2022.101019 ↗
75. Enhancing cryogenic mechanical properties of a cost-effective FeCrNi dual-phase multi-principal element alloy by fully constrained heterostructure and deformation twinning10.1016/j.msea.2024.147365 ↗
76. Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes10.1038/s41586-018-0685-y ↗
77. Ultra-strong and ductile medium entropy alloy with a dual heterogeneous microstructure10.1016/j.actamat.2024.120645 ↗