journal article·2026-03Open access

Understanding effective elastic constants and elastic symmetry in RUS: From single crystals to textured polycrystals

Florian Le Bourdais, Nicolas Leymarie, Audrey Gardahaut

Abstract

Resonant Ultrasound Spectroscopy (RUS) is an inverse method used to characterize elastic constants of a sample based on its acoustic or elastic resonance spectrum. Its main stages are the measurement of the resonance frequencies, the choice of a forward model, assuming well-known geometrical properties and uniform density, and an inverse problem methodology that yields material elastic properties. In the forward model, one must assume a certain elastic symmetry class, which represents the symmetry of the sample and defines the number of unknown elastic constants solved for in the inverse problems. We have found that this choice of sample elastic symmetry, and the associated parametrization by elastic constants and Euler angles, is almost always not discussed and sometimes not well understood by practitioners. We find the situation is particularly confusing for textured samples: exactly what elastic constants does RUS determine in that case? In this paper, we aim at clarifying the elastic symmetry choice in the context of polycrystal texture characterization, which has already seen many contributions using RUS. We illustrate this with texture simulations carried out with MTEX to practically show how different textures can lead to elastic symmetries that range from isotropic to triclinic. Finally, we discuss experimental inversions on an additively manufactured 316 L sample under different sample symmetries assumptions and illustrate the aforementioned topic of choosing a symmetry. • Presentation of the fundamentals of the RUS inverse method and what the recovered elastic constants mean, in the case of single crystals as well as in the case of polycrystals. • We discuss the general choices in terms of elastic symmetry and then focus on polycrystals and how the notion of texture translates to the elastic constants using homogenization medols. • We provide results on simulated textures that illustrate how textures of different strengths materialize as different elastic symmetries. • Finally, we provide experimental results on a previously stainless steel polycrystal with a strong texture and use several RUS inverse models, from transverse isotropy to triclinic symmetry, to investigate the right way to model its texture, to which we compare EBSD data.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Ultrasound Imaging and Elastography · Composite Material Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. A combined marching and minimizing ray-tracing algorithm developed for ultrasonic array imaging of austenitic welds10.1016/j.ndteint.2018.01.008 ↗
2. Bower · 2009
3. Digital measurement of ultrasonic velocity
4. Evaluation of the transmission line model for couplant layer corrections in pulse-echo measurements10.1109/TUFFC.2013.2651 ↗
5. A broadband wavelet implementation for rapid ultrasound pulse-echo time-of-flight measurements10.1063/5.0010475 ↗
6. Complete inversion of the anisotropic elastic tensor in rocks: experiment versus theory
7. Determination of the symmetries of an experimentally determined stiffness tensor: application to acoustic measurements10.1016/S0020-7683(97)00303-X ↗
8. Optimal recovery of the elasticity tensor of general anisotropic materials from ultrasonic velocity data10.1121/1.418040 ↗
9. Resonant ultrasound spectroscopy: the essential toolbox10.1063/1.5123165 ↗
10. Migliori · 1997
11. Resonant ultrasound spectroscopy: theory and application10.1111/j.1365-246X.2004.02093.x ↗
12. Resonant ultrasound spectroscopy and homogeneity in polycrystals10.1016/j.ultras.2008.08.001 ↗
13. Resonant ultrasound spectroscopic techniques for measurement of the elastic moduli of solids10.1016/0921-4526(93)90048-B ↗
14. On the normal modes of free vibration of inhomogeneous and anisotropic elastic objects10.1121/1.401643 ↗
15. Temperature dependence of single crystal elastic constants in a CoNi-base alloy: a new methodology
16. Finite-element-based resonant ultrasound spectroscopy for measurement of multi-material samples10.1121/10.0011516 ↗
17. Measuring elastic constants of arbitrarily shaped samples using resonant ultrasound spectroscopy10.1121/1.3677259 ↗
18. Using finite element method for the determination of elastic moduli by resonant ultrasound spectroscopy10.1121/1.1760800 ↗
19. Determination of elastic constants in complex-shaped materials through vibration-mode-pattern-matching-assisted resonant ultrasound spectroscopy10.1063/5.0185423 ↗
20. The use of piezoelectric film and ultrasound resonance to determine the complete elastic tensor in one measurement10.1121/1.402455 ↗
21. Application of laser-based resonant ultrasound spectroscopy to study texture in copper10.1063/1.3692386 ↗
22. In situ laser-based resonant ultrasound measurements of microstructure mediated mechanical property evolution10.1063/1.3327428 ↗
23. Complete mode identification for resonance ultrasound spectroscopy10.1121/1.1512700 ↗
24. Application of ultrasonic methods to determine elastic anisotropy of polycrystalline copper processed by equal-channel angular pressing10.1016/j.actamat.2009.08.071 ↗
25. Particle swarm optimization-based identification of the elastic properties in resonant ultrasound spectroscopy10.1109/TUFFC.2020.2968840 ↗
26. Bayesian inference of elastic properties with resonant ultrasound spectroscopy10.1121/1.5017840 ↗
27. Bayesian normal modes identification and estimation of elastic coefficients in resonant ultrasound spectroscopy10.1088/0266-5611/31/6/065010 ↗
28. Determination of the crystallographic orientation of a single crystal using resonant ultrasound spectroscopy10.1063/1.1144712 ↗
29. A new elastic characterization method for anisotropic bilayer specimens via Bayesian resonant ultrasound spectroscopy10.1016/j.ultras.2021.106455 ↗
30. What is the young’s Modulus of silicon?10.1109/JMEMS.2009.2039697 ↗
31. Determination of all 21 independent elastic coefficients of generally anisotropic solids by resonant ultrasound spectroscopy: benchmark examples10.1007/s11340-014-9862-6 ↗
32. Implementation of a modern resonant ultrasound spectroscopy system for the measurement of the elastic moduli of small solid specimens10.1063/1.2140494 ↗
33. Spoor · 1997
34. Elastic constants and specific-heat measurements on single crystals of La2CuO4
35. Determination of elastic constants of trigonal crystals by the rectangular parallelepiped resonance method10.1016/0022-3697(86)90141-1 ↗
36. Elastic properties of IN718 fabricated via laser directed energy deposition (DED)
37. Assessment of grain structure evolution with resonant ultrasound spectroscopy in additively manufactured nickel alloys10.1016/j.matchar.2020.110501 ↗
38. Rossin · 2022
39. Bayesian inference of elastic constants and texture coefficients in additively manufactured cobalt-nickel superalloys using resonant ultrasound spectroscopy10.1016/j.actamat.2021.117287 ↗
40. Assessment of anisotropic acoustic properties in additively manufactured materials: experimental, computational, and deep learning approaches10.3390/s24144488 ↗
41. On the potential of resonant ultrasound spectroscopy applied to the non-destructive characterization of the density of (LPBF) additively manufactured materials
42. Symmetry classes for elasticity tensors10.1007/BF00042505 ↗
43. 2001
44. Royer · 2000
45. Bunge · 1982
46. Computational homogenization for multiscale forward modeling of resonant ultrasound spectroscopy of heterogeneous materials10.1016/j.matchar.2019.109945 ↗
47. Review of deterministic methods of calculation of polycrystal elastic constants
48. Zohdi · 2008
49. Determining elastic anisotropy of textured polycrystals using resonant ultrasound spectroscopy10.1007/s10853-021-05827-z ↗
50. Estimating single-crystal elastic constants of polycrystalline β metastable titanium alloy: a Bayesian inference analysis based on high energy X-ray diffraction and micromechanical modeling10.1016/j.actamat.2021.116762 ↗
51. Direct volumetric measurement of crystallographic texture using acoustic waves10.1016/j.actamat.2018.08.037 ↗
52. Rapid measurement of volumetric texture using resonant ultrasound spectroscopy10.1016/j.scriptamat.2018.07.029 ↗
53. Experimental and computational studies of ultrasound wave propagation in hexagonal close-packed polycrystals for texture detection10.1016/j.actamat.2013.10.012 ↗
54. Texture analysis with MTEX – free and open source software toolbox10.4028/www.scientific.net/SSP.160.63 ↗
55. Resonant ultrasound elastic characterization of steel wire arc additive manufacturing samples10.1016/j.matchar.2024.114603 ↗
56. On the anisotropy of thick-walled wire arc additively manufactured stainless steel parts10.1016/j.msea.2022.144538 ↗
57. Tensile properties and microstructural features of 304L austenitic stainless steel produced by wire-and-arc additive manufacturing10.1007/s00170-019-04868-8 ↗
58. Experimentally-validated orthotropic elastic model for wire-and-arc additively manufactured stainless steel
59. Leisure · 1997 · 30
60. Consistent representations of and conversions between 3D rotations10.1088/0965-0393/23/8/083501 ↗
61. A generalized spherical harmonic deconvolution to obtain texture of cubic materials from ultrasonic wave speed10.1016/j.jmps.2015.06.012 ↗