journal article·2017-02

Microwave processed bulk and nano NiMg ferrites: A comparative study on X-band electromagnetic interference shielding properties

K. Chandra Babu Naidu, W. Madhuri

Publisher page

Abstract

Abstract Bulk and nano Ni 1-x Mg x Fe 2 O 4 (x = 0–1) samples were synthesized via microwave double sintering and microwave assisted hydrothermal techniques respectively. The diffraction pattern confirmed the formation of cubic spinel phases in case of both the ferrites. The larger bulk densities were achieved to the bulk than that of nano. In addition, a comparative study on X-band (8.4–12 GHz) electromagnetic interference shielding properties of current bulk and nanomaterials was elucidated. The results showed that the bulk Ni 0.6 Mg 0.4 Fe 2 O 4 composition revealed the highest total shielding efficiency (SE T ) of ∼17 dB. In comparison, the shielding efficiency values of all bulk contents were higher than that of nano because of larger bulk densities. Moreover, the ac-electromagnetic parameters such as electrical conductivity (σ ac ), the respective real (e′ & μ′) and imaginary parts (e″ & μ″) of complex permittivity and permeability were investigated as a function of gigahertz frequency. The bulk ferrites of x = 0.4 & 0.6 showed the high e″ of 10.26 & 6.71 and μ″ of 3.65 & 3.09 respectively at 12 GHz which can work as promising microwave absorber materials. Interestingly, nanoferrites exhibited negative μ″ values at few frequencies due to geometrical effects which improves the microwave absorption.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electromagnetic wave absorption materials · Magnetic Properties and Synthesis of Ferrites · Microwave Dielectric Ceramics Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Thermo set composites functionalized with carbon nano fiber sheets for EMI shielding10.1002/app.41873 ↗
2. Preparation and microwave shielding property of silver-coated carbonyl iron powder10.1016/j.jallcom.2015.01.103 ↗
3. Electromagnetic interference shielding performance of epoxy composites filled with multi-walled carbon nano-tubes/manganese zinc ferrite hybrid fillers10.1016/j.jmmm.2015.10.067 ↗
4. EMI shielding: methods and materials A review10.1002/app.29812 ↗
5. Electromagnetic interference shielding mechanisms of CNT/polymer composites10.1016/j.carbon.2009.02.030 ↗
6. Electrical, EMI shielding and tensile properties of PP/PE blends filled with GNP: CNT hybrid nanofiller10.1016/j.synthmet.2016.04.023 ↗
7. Elastomer foam nano composites for electromagnetic dissipation and shielding applications10.1016/j.compscitech.2010.02.011 ↗
8. Copper nanowire/polystyrene nanocomposites: lower percolation threshold and higher EMI shielding10.1016/j.compositesa.2010.10.003 ↗
9. Structural, electrical and magnetic properties of Sc3+ doped Mn-Zn ferrite Nanoparticles10.1016/j.jmmm.2016.10.050 ↗
10. Dependence of microwave absorbing property on ferrite volume fraction in MnZn ferrite-rubber composites10.1109/20.486547 ↗
11. High-rate low-temperature (90°C) deposition of Ni-Zn ferrite films highly permeable in gigahertz range10.1109/TMAG.2002.802429 ↗
12. In-plane magnetic anisotropy induced in spin-sprayed Ni-Zn-Co ferrite films exhibiting strong magnetic loss at gigahertz range10.1109/TMAG.2003.816027 ↗
13. Complex permittivity and permeability dependence of Ba4Zn2-ZCoZFe36O60 U-type hexaferrites prepared by citrate sol-/gel on composition, annealing temperature and frequency10.1016/S0921-5107(02)00571-8 ↗
14. M-type ferrite composite as a microwave absorber with wide bandwidth in the GHz range10.1109/20.801112 ↗
15. Dielectric properties of microwave absorbing sheets produced with silicone and polyaniline10.1590/S1516-14392010000200013 ↗
16. The effect of annealing on microstructure and cation distribution of NiFe2O410.1016/j.jallcom.2015.07.238 ↗
17. Gram scale synthesis of single crystalline nano-octahedron of NiFe2O4: magnetic and optical properties10.1016/j.matlet.2015.10.025 ↗
18. Structural and magnetic properties of Ni1-xZnxFe2O4 nano-crystalline ferrites prepared via novel chitosan method10.1016/j.molstruc.2014.01.070 ↗
19. The role of annealing temperature and bio template (egg white) on the structural, morphological and magnetic properties of manganese substituted MFe2O4 (M = Zn, Cu, Ni, Co) nanoparticles10.1016/j.jmmm.2013.09.055 ↗
20. Nanosized barium hexaferrite in novolac phenolic resin as microwave absorber for X-band application10.1016/j.jmmm.2013.04.050 ↗
21. Electromagnetic and microwave absorbing properties of NiCoZn-ferrites doped with La3+10.1016/j.jmmm.2013.10.056 ↗
22. Synthesis and electromagnetic properties of La-doped Ni–Zn ferrites10.1016/j.jmmm.2015.09.044 ↗
23. Unique electromagnetic properties of the zinc ferrite nanofiber10.1016/j.matlet.2014.03.049 ↗
24. Fabrication and electromagnetic loss properties of Fe3O4 nanofibers10.1007/s10854-015-2857-y ↗
25. Effect of pH value on electromagnetic loss properties of Co–Zn ferrite prepared via coprecipitation method10.1016/j.jmmm.2015.12.051 ↗
26. Facile preparation and microwave absorption properties of porous hollow BaFe12O19/CoFe2O4 composite microrods10.1016/j.jallcom.2015.07.073 ↗
27. Structural and electrical properties of Ni1- xMgxFe2O4 synthesized by citrate gel process10.1016/j.jmmm.2004.01.073 ↗
28. Evaluation of Mg+2-substituted NiFe2O4 as a green anode material10.1016/j.matlet.2003.12.008 ↗
29. Investigation of the functional properties of MgxNi1-xFe2O4 ceramics10.1007/s10853-014-8033-6 ↗
30. Structural, magnetic and electrical characterization of Mg–Ni nanocrystalline ferrites prepared through egg white precursor10.1016/j.jmmm.2014.03.007 ↗
31. Structural, magnetic and dielectric properties magnesium doped nickel ferrites nano particles10.1016/j.jallcom.2015.07.269 ↗
32. Structural, electrical and magnetic characterization of Ni-Mg spinel ferrites10.1016/j.jallcom.2009.08.057 ↗
33. Structural investigation and functional properties of MgxNi1–xFe2O4 ferrites10.1111/jace.12683 ↗
34. Microwave assisted NiMg ferrites: structural and magnetic properties10.1016/j.jmmm.2016.07.031 ↗
35. Microwave assisted solid state reaction method: investigations on electrical and magnetic properties of NiMgZn ferrites10.1016/j.matchemphys.2016.06.079 ↗
36. Hydrothermal Mg1−xZnxFe2O4 spinel ferrites: phase formation and mechanism of saturation magnetization10.1016/j.matlet.2013.04.002 ↗
37. Continuous synthesis of fine MgFe2O4 nanoparticles by supercritical hydrothermal reaction10.1016/j.supflu.2009.11.005 ↗
38. Structural, dielectric and electrical properties of La2O3 doped SrTiO3 ceramics
39. One-pot synthesis of MgFe2O4 nano spheres by solvothermal method10.1016/j.matlet.2013.01.023 ↗
40. Annealing effect on structural phase transition of as-synthesized Mg0.1Sr0.1Mn0.8Fe2O4 nanoparticles10.1016/j.jallcom.2015.09.114 ↗
41. Solvothermal synthesis and magnetic properties of size-controlled nickel ferrite nanoparticles10.1016/j.jallcom.2009.01.059 ↗
42. Synthesis of highly ordered 30 nm NiFe2O4 particles by the microwave-combustion method10.1016/j.jmmm.2014.06.011 ↗
43. Improved electromagnetic interference shielding response of poly (aniline)-coated fabrics containing dielectric and magnetic nanoparticles10.1021/jp302131w ↗
44. Reduced graphene oxide deposited carbon fiber reinforced polymer composites for electromagnetic interference shielding10.1016/j.compositesa.2015.12.008 ↗
45. A new multicomponent material based on carbonyliron/carbon nanofiber/lanthanum–strontium–manganite as microwave absorbers in the range of 8-12 GHz10.1016/j.ceramint.2016.03.058 ↗
46. The effect of sintering temperature on the electromagnetic properties of nanocrystalline MgCuZn ferrite prepared by sol–gel auto combustion method10.1016/j.matlet.2014.02.027 ↗
47. Enhance permeability and dielectric constant of NiZn ferrite Synthesized in nano crystalline form by a combustion method10.1111/j.1551-2916.2007.01560.x ↗
48. Microwave absorption properties of double-layer absorbers made of NiCoZn ferrites and hollow glass microspheres electroless plated with FeCoNiB10.1016/j.jmmm.2008.10.043 ↗
49. Carbon composite foams with improved strength and electromagnetic absorption from sucrose and multi-walled carbon nanotube10.1016/j.matchemphys.2016.06.091 ↗
50. EMI shielding effectiveness of carbon based nanostructured polymeric materials: a comparative study10.1016/j.carbon.2013.04.008 ↗
51. Automatic measurement of complex dielectric constant and permeability at microwave frequencies10.1109/PROC.1974.9382 ↗
52. Measurement of the intrinsic properties of materials by time- domain techniques10.1109/TIM.1970.4313932 ↗
53. Enhanced electromagnetic interference shielding effectiveness of polycarbonate/graphene nanocomposites foamed via 1-step supercritical carbon dioxide process10.1016/j.matdes.2015.11.021 ↗
54. The properties of a dielectric containing semiconducting particles of various shapes10.1049/pws.1937.0015 ↗
55. Morphology, electromagnetic properties and electromagnetic interference shielding performance of poly lactide/graphene nanoplatelet nanocomposites10.1016/j.matdes.2016.01.086 ↗
56. Electromagnetic interference shielding effectiveness of carbon foam containing in situ grown silicon carbide nanowires10.1016/j.ceramint.2016.04.054 ↗
57. Effect of nonmagnetic Zn2+ cations on initial permeability of microwave-treated NiMg ferrites
58. Elastomer foam nano composites for electromagnetic dissipation and shielding applications10.1016/j.compscitech.2010.02.011 ↗
59. Can the imaginary part of permeability be negative10.1103/PhysRevE.78.026608 ↗
60. The formation, structural, electrical, magnetic and Mossbauer properties of ferri-spinels Cd1−xNixFe2O410.1023/A:1013790129045 ↗