journal article·2019-12

Effects of Al addition on structural evolution and mechanical properties of the CrCoNi medium-entropy alloy

Wenjie Lu, Xian Luo, Yanqing Yang, Jingting Zhang, Bin Huang

Publisher page

Abstract

Abstract In this study, we synthesized a series of (CoCrNi)100-xAlx (x = 0–30 at.%) medium-entropy alloys (MEAs), investigated alloying effects of Al element on microstructure and mechanical properties of CrCoNi MEA, then analyzed the strengthen mechanism caused by Al element. Microstructural evolutions were evaluated by means of X-ray diffraction (XRD), optical microscopy (OM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The microstructures of (CoCrNi)100-xAlx MEAs evolved from single face-centered cubic (FCC) (x ≤ x ≥ 22 at.%) structures with Al content increase. When Al content increase to 16 at.%, BCC phase decomposed into plate-like intervened structure with ordered and disordered BCC phases (B2 and A2 structure) by spinodal decomposition mechanism. When Al content higher than 22 at.%, spinodal structure evolve from plate-like intervened structure to spherical particles dispersed in matrix structure. The hardness of Alx alloys increased from HV170 to the maximum of HV700 and the compressive yield strength rose form 204 MPa–1792 MPa. The solid-solution strengthening of Al element and formation of hard BCC phase were the two main factors contributing to the strengthening effect in this alloy system. Experimental results showed that the duplex FCC plus BCC structure can significant enhanced the strength-ductility synergy of CrCoNi MEA. It is especially noted that Al19 alloy which consist of 40% volume fraction FCC and 60% volume fraction BCC exhibits the most attractive properties accompany with compromise compressive yield strength, fracture strength and facture strain of 1226 MPa, 2542 MPa and 21.97%, respectively, and the corresponding hardness of 494 HV.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. An assessment on the future development of high-entropy alloys: summary from a recent workshop10.1016/j.intermet.2015.06.021 ↗
2. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
3. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
4. Fundamental deformation behavior in high-entropy alloys: an overview10.1016/j.cossms.2017.08.003 ↗
5. Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy10.1016/j.actamat.2017.07.029 ↗
6. Dynamic shear deformation of a CrCoNi medium-entropy alloy with heterogeneous grain structures10.1016/j.actamat.2018.02.016 ↗
7. Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures10.1038/ncomms10602 ↗
8. Dislocation mechanisms and 3D twin architectures generate exceptional strength-ductility-toughness combination in CrCoNi medium-entropy alloy10.1038/ncomms14390 ↗
9. Microstructure, thermophysical and electrical properties in AlxCoCrFeNi (0≤x≤2) high-entropy alloys10.1016/j.mseb.2009.05.024 ↗
10. Fatigue behavior of a wrought Al 0.5 CoCrCuFeNi two-phase high-entropy alloy10.1016/j.actamat.2015.07.004 ↗
11. Microstructure, hardness, resistivity and thermal stability of sputtered oxide films of AlCoCrCu0.5NiFe high-entropy alloy10.1016/j.msea.2006.12.001 ↗
12. Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloys10.1016/j.actamat.2012.06.046 ↗
13. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
14. Development of a new high entropy alloy for wear resistance: FeCoCrNiW 0.3 and FeCoCrNiW 0.3 + 5 at.% of C10.1016/j.matdes.2016.11.027 ↗
15. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
16. Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures10.1016/j.actamat.2014.08.026 ↗
17. Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi10.1016/j.actamat.2017.02.036 ↗
18. Gao · 2016
19. Alloy design strategies and future trends in high-entropy alloys10.1007/s11837-013-0761-6 ↗
20. Exploration and development of high entropy alloys for structural applications10.3390/e16010494 ↗
21. Dual-phase high-entropy alloys for high-temperature structural applications10.1016/j.jallcom.2017.09.089 ↗
22. Microstructure and mechanical properties of multiprincipal component CoCrFeNiMox alloys10.1016/j.matchar.2012.05.005 ↗
23. Novel microstructure and properties of multicomponent CoCrCuFeNiTix alloys10.1016/j.intermet.2006.08.005 ↗
24. Microstructure and compressive properties of multicomponent Alx(TiVCrMnFeCoNiCu)100−x high-entropy alloys10.1016/j.msea.2006.11.049 ↗
25. Microstructures and mechanical properties of multiprincipal component CoCrFeNiTix alloys10.1016/j.msea.2012.06.075 ↗
26. Microstructure and properties of AlCrFeCuNix (0.6≤x≤1.4) high-entropy alloys10.1016/j.msea.2011.11.063 ↗
27. Effect of V content on microstructure and mechanical properties of the CoCrFeMnNiVx high entropy alloys10.1016/j.jallcom.2014.12.157 ↗
28. Effect of Zr content on microstructure and mechanical properties of AlCoCrFeNi high entropy alloy10.1016/j.matdes.2016.01.033 ↗
29. Microstructure and mechanical properties of a refractory CoCrMoNbTi high-entropy alloy10.1007/s11665-017-2799-z ↗
30. Microstructure and properties of novel CoCrFeNiTax eutectic high-entropy alloys10.1016/j.jallcom.2017.11.075 ↗
31. Effect of niobium on microstructure and properties of the CoCrFeNbx Ni high entropy alloys10.1016/j.jmst.2016.09.016 ↗
32. Microstructures and properties of CoCrCuFeNiMox high-entropy alloys fabricated by mechanical alloying and spark plasma sintering10.1080/00325899.2017.1415248 ↗
33. Microstructure and properties of novel CoCrFeNiTax eutectic high-entropy alloys10.1016/j.jallcom.2017.11.075 ↗
34. Microstructure characterization of CoCrFeNiMnPdx eutectic high-entropy alloys10.1016/j.jallcom.2017.09.057 ↗
35. Effects of Ta addition on the microstructures and mechanical properties of CoCrFeNi high entropy alloy10.1016/j.matchemphys.2017.05.056 ↗
36. Microstructural origins of high strength and high ductility in an AlCoCrFeNi2.1 eutectic high-entropy alloy10.1016/j.actamat.2017.07.041 ↗
37. Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases10.1016/j.actamat.2016.06.063 ↗
38. Microstructure and properties of Al0.4FeCrNiCo1.5Ti0.3 high entropy alloy prepared by MA-HP technique10.1016/S1875-5372(15)60039-X ↗
39. Designing eutectic high entropy alloys of CoCrFeNiNbx10.1016/j.jallcom.2015.09.153 ↗
40. Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys10.1016/j.intermet.2012.03.005 ↗
41. Effect of aluminum contents on microstructure and properties of AlxCoCrFeNi alloys10.1016/j.jallcom.2010.03.111 ↗
42. Adhesive wear behavior of AlxCoCrCuFeNi high-entropy alloys as a function of aluminum content10.1016/j.wear.2005.12.008 ↗
43. On the elemental effect of AlCoCrCuFeNi high-entropy alloy system10.1016/j.matlet.2006.03.140 ↗
44. Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system10.1016/j.actamat.2013.09.037 ↗
45. Calculations of mixing enthalpy and mismatch entropy for ternary amorphous alloys10.2320/matertrans1989.41.1372 ↗
46. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
47. Effect of the atomic size distribution on glass forming ability of amorphous metallic alloys10.1016/S0025-5408(01)00715-2 ↗
48. The effect of compressive deformation of austenite on the widmanstätten ferrite transformation in Fe-Mn-Si-C steel10.1016/S0921-5093(98)01085-5 ↗
49. In situ observations of Widmanstätten ferrite formation in a low-carbon steel10.1016/j.msea.2005.07.015 ↗
50. Effect of precipitates on damping capacity and mechanical properties of Ti–6Al–4V alloy10.1016/j.msea.2007.08.053 ↗
51. Formation of α-widmanstätten structure: effects of grain size and cooling rate on the widmanstätten morphologies and on the mechanical properties in ti6al4v alloy10.1016/S0925-8388(01)01571-7 ↗
52. Microstructure characterization of AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements10.1007/s11661-005-0283-0 ↗
53. Morphological evolution during phase separation and coarsening with strong inhomogeneous elasticity10.1088/0965-0393/9/6/303 ↗
54. Atomic size effect on the formability of metallic glasses10.1016/0022-3093(84)90210-2 ↗
55. Alger · 1996
56. Optimization of mechanical and tribological properties of FCC CrCoNi multi-principal element alloy with Mo addition10.1016/j.vacuum.2018.01.012 ↗
57. Synthesis and properties of multiprincipal component AlCoCrFeNiSix alloys10.1016/j.msea.2010.07.049 ↗
58. Effect of Nb addition on the microstructure and properties of AlCoCrFeNi high-entropy alloy10.1016/j.msea.2011.10.110 ↗