Determination of acoustic wave velocities and elastic properties for diamond and other hard materials
Source abstract
Abstract
Abstract Single crystal of diamond, LiNbO 3 , LiTaO 3 , silicon, and various polycrystalline hard materials were used to measure the room temperature ultrasonic velocity utilizing a pulse-echo method. The elastic constants were then calculated from the wave velocities. The results indicate that [1 1 1] direction of diamond possesses the fastest longitudinal wave velocity (19 039 m s −1 ) and the largest Young’s modulus (1223 GPa). Acoustic wave velocity and Young’s modulus of polycrystalline CVD diamond are similar to those of single crystal diamond, but much larger than Co or SiC bonded polycrystalline diamonds. The existence of grain boundary at the polycrystalline CVD diamond does not significantly affect the propagation of the acoustic wave. Cubic boron nitride (cBN), silicon and diamond possess cubic structure, however, the wave velocity and elastic constant of cBN and Si are inferior to diamond, due to the differences in the bond nature and bond length. The dependents of acoustic wave velocity and elastic constant on the crystal structure as well as specific gravity are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Acoustic Wave Resonator Technologies · Advanced Fiber Optic Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Fabrication of aluminium nitride/diamond and gallium nitride/diamond SAW devices10.1016/S0925-9635(98)00263-5 ↗
2. Polycrystalline diamond films for acoustic wave devices10.1016/S0925-9635(97)00278-1 ↗
3. H. Nakahata, K. Higaki, S. Fujii, A. Hachigo, H. Kitabayashi, K. Tanabe, Y. Seki, S. Shikata, SAW devices on diamond, in: Proceedings of the IEEE Ultrasonics Symposium, 1995, pp. 361–370.10.1109/ULTSYM.1995.495599 ↗
4. Improvement of LiNbO3 surface roughness by using a multi-step process: relationship between optical and AFM analysis10.1080/10584580215484 ↗
5. K. Higaki, H. Nakahata, H. Kitabayashi, S. Fujii, K. Tanabe, Y. Seki, S. Shikata, High frequency SAW filter on diamond, in: Proceedings of the IEEE MTT-S Digest, 1997, pp. 829–832.10.1109/MWSYM.1997.602924 ↗
6. Temperature and pressure dependence of elastic properties of a ZBLAN glass10.1016/S0254-0584(01)00469-2 ↗
7. C. Kittel, Introduction to Solid State Physics, 2nd ed., Wiley, New York, 1956 (Chapter 4).
8. Elastic moduli of diamond as a function of pressure and temperature10.1063/1.1661636 ↗
9. Brillouin scattering in diamond10.1103/PhysRevB.11.3139 ↗
10. J.E. Field, The Properties of Natural and Synthetic Diamond, Academic Press, London, 1992, pp. 449–513.
11. B.L. Cline, J.M. Olson, CVD diamond solutions for machining and other mechanical applications, in: J. Asmussen, D.K. Reinhard (Eds.), Diamond Films—Handbook, Marcel Dekker, New York, 2002, pp. 433–439.
12. A.V. Bochko, Superhard composites of cubic boron nitride, in: M.A. Prelas, et al. (Eds.), Diamond Based Composites, Kluwer Academic Publishers, The Netherlands, 1997, pp. 361–367.10.1007/978-94-011-5592-2_33 ↗