Eco-friendly C60-SESMP-Fe3O4 inorganic magnetizable nanocomposite as high-performance adsorbent for magnetic removal of arsenic from crude oil and water samples
Source abstract
Abstract
Abstract Fullerene biopolymer-magnetite nano inorganic composite is produced from newly prepared fullerene (C60) soluble eggshell membrane protein (SESMP) composite mixed with Fe3O4NPs. UV–Vis, FTIR, VSM, SEM, EDX and STEM are demonstrated that a stable Fe3O4 can be retained on the surface of C60-ESMP bio nanocomposite by a multi-step chemical reaction. The resulting eco-friendly C60-ESMP-Fe3O4 nano inorganic composite was screened for its magnetic solid phase extraction (MSPE) performance of arsenic in six crude oil and water samples using ICP-OES technique. The pH, eluent type, concentration and volume, standing, elution and sedimentation times, sample volume, C60-SESMP-Fe3O4 mass, interfering ions and reusability of the prepared nanocomposite have been examined. The optimal conditions were experimentally investigated to be pH = 8, sample volume = 50 mL and C60-SESMP-Fe3O4 mass = 20 mg with an enrichment factor of 20. The results of reuse were excellent, showing high reusability, which were 20 MSPE runs with only 0.2–1% error. The limits of detection (LOD) were found to be 0.0473 and 0.0325 ng. mL−1 for As(III) and As(V), respectively. Subsequently, relative standard deviations (RSD%) were determined as 1.15% for As(III) and 1.31% for As(V). These results indicate that this stable nanocomposites system would be an excellent candidate for removal of As(III) and As(V) rapidly from crude oil and water with the ability of reuse.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Arsenic contamination and mitigation · Electrochemical Analysis and Applications · Nanoparticles: synthesis and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Determination of trace elements in petroleum by neutron activation analysis10.1007/BF02513968 ↗
2. A comparison of instrumental neutron activation analysis and inductively coupled plasma-mass spectrometry for trace element determination in petroleum geochemistry10.1007/BF02035917 ↗
3. Arsenic complexes in the arsenic hyperaccumulator Pteris vittata (Chinese brake fern)10.1016/j.chroma.2004.05.090 ↗
4. Determination of soluble toxic arsenic species in alga samples by microwave-assisted extraction and high performance liquid chromatography–hydride generation–inductively coupled plasma- atomic emission spectrometry10.1016/j.chroma.2006.06.083 ↗
5. Arsenic—a review. Part I: occurrence, toxicity, speciation, mobility10.1002/aheh.200390025 ↗
6. The broad scope of health effects from chronic arsenic exposure: update on a worldwide public health problem10.1289/ehp.1205875 ↗
7. Ion chromatography-inductively coupled plasma mass spectrometry determination of arsenic species in marine samples10.1002/aoc.642 ↗
8. Analytical potential of fullerene as adsorbent for organic and organometallic compounds from aqueous solutions10.1016/S0021-9673(99)01050-X ↗
9. Application of the polysilicone fullerene coating for solid-phase microextraction in the determination of semi-volatile compounds10.1016/S0021-9673(01)01046-9 ↗
10. Fullerenes as sorbent materials for metal preconcentration10.1021/ac00094a033 ↗
11. Magnetic solid-phase extraction based on magnetic multi-walled carbon nanotubes for the determination of phthalate monoesters in urine samples10.1016/j.chroma.2013.02.070 ↗
12. Preparation of Fe3O4@C@PANI magnetic microspheres for the extraction and analysis of phenolic compounds in water samples by gas chromatography-mass spectrometry10.1016/j.chroma.2011.03.044 ↗
13. Development of maghemite nanoparticles supported on cross-linked chitosan (γ-Fe2O3@CS) as a recoverable mesoporous magnetic composite for effective heavy metals removal10.1016/j.molliq.2017.10.014 ↗
14. Synthesis of chitosan zero-valent iron nanoparticles-supported for cadmium removal: characterization, optimization and modeling approach10.2166/aqua.2017.027 ↗
15. Recyclable CNTs/Fe3O4 magnetic nanocomposites as adsorbents to remove bisphenol A from water and their regeneration10.1016/j.cej.2014.09.032 ↗
16. Preparation of graphene sheets with covalently bonded Fe3O4 for magnetic solid-phase extraction applied to organochlorine pesticides in orange juice10.1007/s10337-016-3024-1 ↗
17. Facile and tunable fabrication of Fe3O4/graphene oxide nanocomposites and their application in the magnetic solid-phase extraction of polycyclic aromatic hydrocarbons from environmental water samples10.1016/j.talanta.2012.09.046 ↗
18. Graphene oxide bonded fused silica fiber for solid-phase micro extraction-gas chromatography of polycyclic aromatic hydrocarbons in water10.1002/jssc.201100612 ↗
19. Comparative treatment of textile wastewater by adsorption, Fenton, UV-Fenton and US-Fenton using magnetic nanoparticles-functionalized carbon (MNPs@ C)10.1016/j.jiec.2017.07.009 ↗
20. Iron–silver oxide nanoadsorbent synthesized by co-precipitation process for fluoride removal from aqueous solution and its adsorption mechanism10.1039/C5RA17595J ↗
21. Adsorption behavior of some aromatic compounds on hydrophobic magnetite for magnetic separation10.1016/j.jhazmat.2011.09.033 ↗
22. A new and efficient method for the adsorption and separation of arsenic metal ion from mining waste waters of zarshouran gold mine by magnetic solid-phase extraction with modified magnetic nanoparticles
23. Sensitive determination of as (III) and as (V) by magnetic solid phase extraction with Fe@polyethyleneimine in combination with hydride generation atomic fluorescence spectrometry10.1016/j.talanta.2016.05.024 ↗
24. Speciation of inorganic arsenic in environmental waters using magnetic solid phase extraction and preconcentration followed by ICP-MS10.1007/s00604-010-0532-9 ↗
25. Speciation analysis of inorganic arsenic in food and water samples by electrothermal atomic absorption spectrometry after magnetic solid phase extraction by a novel MOF-199/modified magnetite nanoparticle composite10.1039/C6RA21819A ↗
26. Solid-phase extraction- gas chromatography-mass spectrometry using a fullerene sorbent for the determination of inorganic mercury(II), methylmercury (I) and ethylmercury(I) in surface waters at sub-ng/ml levels10.1016/j.chroma.2004.09.026 ↗
27. Development and application of C60-fullerene bound silica for solid-phase extraction of biomolecules10.1021/ac0712392 ↗
28. Use of fullerene-, octadecyl and triaconthyl silica for solid phase extraction of tryptic peptides obtained from unmodified and in vitro glycated human serum albumin and fibrinogen10.1002/jssc.200800462 ↗
29. Magnetic solid phase extraction based on fullerene and activated carbon adsorbents for determination of azo dyes in water samples by capillary electrophoresis10.1039/C6AY02631A ↗
30. A green sorbent of esterified egg-shell membrane for highly selective uptake of arsenate and speciation of inorganic arsenic10.1016/j.talanta.2013.07.061 ↗
31. Eggshell membrane-based solid-phase extraction combined with hydride generation atomic fluorescence spectrometry for trace arsenic(V) in environmental water samples10.1016/j.talanta.2009.10.042 ↗
32. Biosorption of multifold toxic heavy metal ions from aqueous water onto food residue eggshell membrane functionalized with ammonium thioglycolate10.1021/jf4003939 ↗
33. Soluble eggshell membrane protein: preparation, characterization and biocompatibility10.1016/j.biomaterials.2003.11.052 ↗
34. Preparation of aqueous magnetic liquids in alkaline and acidic media10.1109/TMAG.1981.1061188 ↗
35. Removal of Cu(II) and fulvic acid by graphene oxide nanosheets decorated with Fe3O4 nanoparticles10.1021/am301358b ↗
36. Khuhawar · 2012
37. Non-aqueous to aqueous phase transfer of oleic acid coated iron oxide nanoparticles for hyperthermia application10.1039/C3RA44644A ↗
38. Continuous preparation of Fe3O4 nanoparticles using impinging stream-rotating packed bed reactor and magnetic property thereof10.1016/j.jallcom.2015.12.025 ↗
39. Characterization of Collagen from eggshell membrane10.3923/biotech.2009.254.258 ↗
40. Potentiometric urea biosensor based on an immobilised fullerene-urease bio-conjugate10.3390/s131216851 ↗
41. Determination of trace/ultratrace rare earth elements in Environmental samples by ICP-MS after magnetic solid phase extraction with Fe3O4@SiO2@polyaniline–graphene oxide composite10.1016/j.talanta.2013.11.027 ↗
42. Preparation, characterization and photocatalytic behavior of WO3-fullerene/TiO2 catalysts under visible light10.1186/1556-276X-6-459 ↗
43. Intraperitoneal injection of magnetic Fe3O4-nanoparticle induces hepatic and renal tissue injury via oxidative stress in mice
44. Solid phase extraction of Cd(II), Pb(II), Zn(II) and Ni(II) from food samples using multiwalled carbon nanotubes impregnated with 4-(2-thiazolylazo) resorcinol10.1007/s00604-012-0789-2 ↗
45. Chemically modified carbon nanotubes as efficient and selective sorbent for enrichment of trace amount of some metal ions10.1016/j.jiec.2013.01.011 ↗
46. Multiwalled carbon nanotube impregnated with tartrazine: solid phase extractant for Cd(II) and Pb(II)10.1016/j.jiec.2013.05.017 ↗
47. In situ rapid magnetic solid-phase extraction coupled with HPLC-ICP-MS for mercury speciation in environmental water10.1016/j.microc.2015.11.040 ↗
48. Simultaneous adsorption of lead and aniline onto magnetically recoverable carbon: optimization, modeling and mechanism10.1002/jctb.4925 ↗
49. Modeling and optimization of nonylphenol removal from contaminated water media using a magnetic recoverable composite by artificial neural networks10.2166/wst.2016.523 ↗
50. Arsenic speciation in natural water samples by coprecipitation-hydride generation atomic absorption spectrometry combination10.1016/j.talanta.2008.10.035 ↗
51. A magnetized nanoparticle based solid-phase extraction procedure followed by inductively coupled plasma atomic emission spectrometry to determine arsenic, lead and cadmium in water, milk, Indian rice and red tea bull10.1007/s00128-017-2068-8 ↗
52. Determination of arsenic (III) by flow injection solid phase extraction coupled with on-line hydride generation atomic absorption spectrometry using a PTFE turnings-packed micro-column10.1016/j.aca.2005.12.055 ↗
53. Arsenic speciation in environmental waters by a new specific phosphine modified polymer microsphere preconcentration and HPLC–ICP-MS determination10.1016/j.talanta.2016.07.050 ↗
54. Speciation of as (III) and as (V) in water samples by dispersive liquid-liquid microextraction separation and determination by graphite furnace atomic absorption spectrometry10.1007/s00604-009-0162-2 ↗
55. Magnetic iron–cobalt/silica nanocomposite as adsorbent in micro solid-phase extraction for preconcentration of arsenic in environmental samples10.1016/j.microc.2016.05.005 ↗
56. Cloud point extraction for trace inorganic arsenic speciation analysis in water samples by hydride generation atomic fluorescence spectrometry10.1016/j.sab.2015.07.003 ↗
57. Arsenic speciation based on amine-functionalized bimodal mesoporous silica nanoparticles by ultrasound assisted-dispersive solid-liquid multiple phase microextraction10.1016/j.microc.2016.08.013 ↗