CO2 corrosion resistance of carbon steel in relation with microstructure changes
Source abstract
Abstract
The microstructural effects on the corrosion resistance of an API 5L X42 carbon steel in 0.5 M NaCl solution saturated with CO2 was investigated. Four microstructures were considered: banded (B), normalized (N), quenched and tempered (Q&T), and annealed (A). Electrochemical measurements (polarization curves and electrochemical impedance spectroscopy) were coupled with surface analyses (scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS)) to characterize the formation of the corrosion product layers. Electrochemical results revealed that corrosion resistance increased in the following order: B < N < Q&T < A. From the polarization curves it was shown that specifically, cathodic current densities were affected by microstructural changes. SEM images indicated that ferrite dissolved earlier than cementite and a thin layer of corrosion products was deposited on the steel surface. XPS analyses revealed that this layer was composed of a mixture of iron carbonate and non-dissolved cementite. It was also found that the quantity of FeCO3 content on the steel surface was greater for Q&T and A microstructures. These results, in agreement with the electrochemical data, indicate that the deposition mechanism of iron carbonate is closely related to the morphology of the non-dissolved cementite, determining the protective properties of the corrosion product layers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. The influence of microstructure and chemical composition of carbon and low alloy steels in CO2 corrosion. A state-of-the-art appraisal10.1016/S0261-3069(03)00158-4 ↗
2. Effect of steel microstructure on corrosion rate and protective iron carbonate film formation10.5006/1.3290361 ↗
3. The influence of carbon steel microstructure on corrosion layers. An XPS and SEM characterization10.1016/S0169-4332(02)01218-7 ↗
4. The influence of steel microstructure on CO2 corrosion. EIS studies on the inhibition efficiency of benzimidazole10.1016/S0013-4686(02)00776-4 ↗
5. Effect of microstructure on corrosion of steels in aqueous solutions containing carbon dioxide10.5006/1.3284876 ↗
6. Effect of microstructure and Cr content in steel on CO2 corrosion
7. Effect of environmental factor and microstructure on morphology of corrosion products in CO2 environments
8. Microstructure analysis of coupons exposed to carbon dioxide corrosion in multiphase flow10.5006/1.3284885 ↗
9. Efecto de la perlita en aceros bandeados sobre la resistencia a la corrosión por CO2
10. Influence of microstructure on mechanical properties and corrosion behavior of 3% Cr steel in CO2 environment
11. Role of conductive corrosion products in the protectiveness of corrosion layers10.5006/1.3284844 ↗
12. Fe3C influence on the corrosion rate of mild steel in aqueous CO2 systems under turbulent flow conditions10.1016/S0010-938X(01)00141-X ↗
13. Protective iron carbonate films. Part 1: mechanical removal in single-phase aqueous flow10.5006/1.3278279 ↗
14. Electrochemical impedance spectroscopy and surface characterization techniques to study dioxide carbon product scales10.5006/1.3284803 ↗
15. Surface effects on the electrochemistry of iron and carbon steel electrodes in aqueous CO2 solutions
16. Characteristics of corrosion scales on steels in a CO2 saturated NaCl brine
17. Evolution of dissolution processes at the interface of carbon steel corroding in a CO2 environment studied by EIS10.1016/j.corsci.2009.10.007 ↗
18. Electrochemical investigation of the corrosion behavior of API 5L-X65 carbon steel in carbon dioxide medium10.5006/0971 ↗
19. ASTM E 3–01, Standard Guide for preparation of Metallographic Specimens, American Society for Testing Materials.
20. ASTM E 407–99, Standard Guide for Microetching Metals and Alloys, American Society for Testing Materials.
21. ASTM E 140–97, Standard Hardness Conversion Tables for Metals. Relationship Among Brinell Hardness Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness, American Society for Testing Materials.
22. 2004 · vol. 4
23. Effect of microstructural banding in steel10.1007/BF02663328 ↗
24. Effect of manganese segregation on fine-grained ferrite structure in low-carbon steel slabs10.2355/isijinternational.43.1833 ↗
25. Porter · 1992
26. 1991 · Vol. 4
27. API 5L Standard, Specification for line pipe. 45th ed., American Petroleum Institute.
28. Enhanced graphical representation of electrochemical impedance data10.1149/1.2168377 ↗
29. Determination of effective capacitance and film thickness from constant-phase-element parameters10.1016/j.electacta.2009.10.065 ↗
30. Corrosion of X65 steel in CO2-saturated oilfield formation water in the absence and presence of acetic acid10.1016/j.corsci.2009.04.004 ↗
31. Reaction model for iron dissolution studied by electrode impedance. Part I- experimental results and reaction model10.1149/1.2127401 ↗
32. Gabrielli · 1998
33. Hydrogen evolution in aqueous solutions containing dissolved CO2: quantitative contribution of the buffering effect10.1016/j.corsci.2007.12.007 ↗
34. ASTM G 102–04. Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements, American Society for Testing Materials.
35. Discussion of electrochemical polarization, 1. A theoretical analysis of the shape of polarization curves10.1149/1.2428496 ↗
36. Production of bulk cementite and its characterization10.1007/s11661-001-0024-y ↗
37. The effect of pre-corrosion and steel microstructure on inhibitor performance in CO2 corrosion10.1016/j.corsci.2008.06.031 ↗
38. Characterization of the surface film formed from carbon dioxide corrosion on N80 steel10.1016/j.matlet.2003.08.020 ↗
39. An XPS characterization of FeCO3 from CO2 corrosion10.1016/S0010-938X(98)00180-2 ↗
40. Differential thermal analysis