journal article·2016-10

The tensile behavior of GH3535 superalloy at elevated temperature

F.F. Han, B.M. Zhou, H.F. Huang, B. Leng, Y.L. Lu, J.S. Dong, Z.J. Li, X.T. Zhou

Publisher page

Abstract

Abstract The tensile behavior of GH3535 alloy has been investigated at strain rates of 8.33 × 10 −5 /s −1 –8.33 × 10 −3 /s −1 , in the temperature range of 25–800 °C. The results showed that the ultimate tensile strength was decreased with increasing temperature and increased with rising strain rate, whereas the yield strength kept almost a constant value at the temperature range from 550 to 800 °C in all strain rates test. The formation of M 12 C carbides at the grain boundary during the tension process played an important role in increasing the yield strength of the alloy at elevated temperatures. But inhomogeneous deformation at 650 °C resulted in the minimum ductility of the alloy. Additionally, various types of serrations were noticed on the stress-strain curves for the alloy tested in the temperature range of 500–800 °C. Normal Portevin-Le Chatelier (PLC) effect and positive strain rate sensitivity were observed in this alloy. Type A and A + B serrations were presented to stress-strain curves at temperatures below 650 °C, whereas type C serration was noticed when the temperature rose above 650 °C. The analysis suggested that the interactions between substitutional solutes migration and mobile dislocations were the main reason for the serrated flow behavior in this alloy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Metallurgy and Material Forming · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Rosental · 1972
2. Improving oxidation resistance of Ni-16Mo-7Cr-4Fe nickel-based superalloy by yttrium microalloying
3. Venard · 1965
4. Effect of long-term thermal exposure on microstructure and stress rupture properties of GH3535 superalloy10.1016/j.jmst.2014.07.021 ↗
5. Mechanism of yield strength anomaly of Alloy 61710.1016/j.msea.2009.03.090 ↗
6. Tensile deformation behavior of a nickel based superalloy at different temperatures10.1016/j.msea.2014.01.056 ↗
7. Effect of temperature on tensile behavior of Ni-Cr-W based superalloy10.1016/j.msea.2010.11.053 ↗
8. Flow stress anomalies in γ/γ´ two-phase Co–Al–W-base alloys10.1016/j.scriptamat.2006.10.039 ↗
9. Yield stress anomalies in ordered alloys: a review of microstructural findings and related hypotheses10.1016/S0921-5093(00)01662-2 ↗
10. Influence of temperature on tensile behavior and deformation mechanism of Re-containing single crystal superalloy10.1016/S1003-6326(11)60890-X ↗
11. Dynamic strain ageing of an austenitic superalloy - temperature and strain rate effects10.1016/j.msea.2007.05.056 ↗
12. Activation energy calculations for discontinuous yielding in Inconel 718SPF10.1016/S0921-5093(00)01470-2 ↗
13. Effects of temperature and strain rate on tensile properties and activation energy for dynamic strain aging in Alloy 62510.1007/s11661-004-0057-0 ↗
14. Investigation of the dynamic strain aging and mechanical properties in Alloy-625 with different microstructures10.1007/s11661-014-2717-z ↗
15. Effect of temperature and strain rate on serrated flow behaviour of Hastelloy X10.1016/j.msea.2011.12.011 ↗
16. On the mechanism of delayed discontinuous plastic flow in an age-hardened nickel alloy10.1016/0001-6160(82)90148-1 ↗
17. Dynamic strain aging in a new Ni-Co base superalloy10.1016/j.scriptamat.2010.11.025 ↗
18. Dynamic strain ageing in Ni-base superalloy 720Li
19. The characteristics of serrated flow in superalloy In738LC10.1016/j.msea.2007.09.061 ↗
20. A model for the Portevin-Le Chatelier effect in substitutional alloys10.1016/0001-6160(72)90028-4 ↗
21. Yield strength anomaly in B2 ordered FeAl alloys: role of boron10.1016/S1359-6462(00)00367-5 ↗
22. On the yield anomaly in stoichiometric CoTi10.1016/S0921-5093(01)01571-4 ↗
23. Observations of dynamic strain aging in polycrystalline NiAl10.1016/0966-9795(96)00045-3 ↗
24. Deformation mechanisms of a nickel-based single-crystal superalloy during low-cycle fatigue at different temperatures10.1016/j.scriptamat.2014.11.026 ↗
25. Comparison of low-cycle fatigue behaviors between two nickel-based single-crystal superalloys10.1016/j.ijfatigue.2014.01.018 ↗
26. Stacking fault energies in austenitic stainless steels10.1016/j.actamat.2016.03.042 ↗
27. A model for the flow stress and strain rate sensitivity of a substitutional alloy-Cu-3.1 at.% Sn10.1016/0001-6160(83)90067-6 ↗
28. Smithels · 1983
29. Grain boundary self-diffusion of 51Cr and 59Fe in austenitic Ni-Fe-Cr alloys10.1016/0921-5093(91)90830-G ↗
30. Dynamic strain aging in a newly developed Ni-Co-Base Superalloy with low stacking fault energy10.1016/j.jmst.2013.04.012 ↗
31. New observations on the mechanisms of dynamic strain aging and of jerky flow10.1016/0001-6160(79)90130-5 ↗
32. Slow strain-hardening of ingot iron10.1016/0001-6160(58)90101-9 ↗
33. The effect of temperature on strain rate sensitivity in an Al-Mg-Si alloy10.1016/0956-7151(93)90042-Q ↗