Evolution of sludge particles in secondary die-cast aluminum alloys as function of Fe, Mn and Cr contents
Source abstract
Abstract
Abstract The evolution of sludge particles in a secondary high-pressure die-cast AlSi9Cu3(Fe) alloy has been investigated over three levels of iron (0.80, 1.00, 1.20 wt.%) and manganese (0.25, 0.40, 0.55 wt.%), and two levels of chromium (0.06, 0.10 wt.%). Metallographic and image analysis techniques have been used in order to quantitatively evaluate the morphological and dimensional variations of sludge with different Fe, Mn and Cr contents. The results indicate that any increase of the Fe, Mn and Cr level promotes the formation of coarser sludge, with polyhedral and star-like morphologies. Fe and Mn produce an increase on the number of primary Fe-rich particles, while Cr promotes the formation of a large number of secondary Fe-rich particles. No relationship is revealed between the morphological variation of sludge and the Fe, Mn or Cr contents, as well as between the sludge factor and the Fe:Mn ratio. In the analyzed range of composition, the design of experiment methodology and the analysis of variance have been used in order to develop statistical models that accurately predict the average size and number of sludge particles in the AlSi9Cu3(Fe) diecasting alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Bauxite Residue and Utilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Kaufman · 2004
2. Effects of Be and Fe on the mechanical and corrosion behaviors of A357 alloys10.1016/j.matchemphys.2005.03.029 ↗
3. Effect of primary intermetallic particles on surface microstructure and appearance of aluminium extrusions10.1016/j.matchemphys.2008.07.109 ↗
4. Iron-related porosity in Al-Si-(Cu) foundry alloys10.1016/j.msea.2006.03.045 ↗
5. Iron-rich intermetallic phases and their role in casting defect formation in hypoeutectic Al-Si alloys
6. Effect of iron in Al-Si casting alloys: a critical review
7. Influence of additives on the microstructure and tensile properties of near-eutectic Al-10.8%Si cast alloy10.1016/j.matdes.2009.05.042 ↗
8. Influence of additives on the impact toughness of Al-10.8% Si near-eutectic cast alloys10.1016/j.matdes.2009.04.041 ↗
9. The influence of Fe and Mn content and cooling rate on the microstructure and mechanical properties of A380-die casting alloys
10. The effect of iron and manganese on the formation of intermetallic compounds in aluminum-silicon alloys10.1016/S0921-5093(04)00832-9 ↗
11. Mondolfo · 1976
12. The influence of cooling rate and manganese content on the β-Al5FeSi phase formation and mechanical properties of Al-Si-based alloys10.1016/j.msea.2008.01.056 ↗
13. The influence of Fe and Cr on the microstructure of cast Al-Si-Mg alloys10.1007/BF02644441 ↗
14. Crystallization behavior of iron-containing intermetallic compounds in 319 aluminum alloy10.1007/BF02668540 ↗
15. Solidification Characteristics of Aluminum Alloys
16. Effect of iron on the microstructure and mechanical property of Al-Mg-Si-Mn and Al-Mg-Si diecast alloys10.1016/j.msea.2012.11.095 ↗
17. The influence of Cr content on the microstructure and mechanical properties of AlSi9Cu3(Fe) die-casting alloys10.1016/j.msea.2010.08.079 ↗
18. Effect of iron and manganese contents on convection-free precipitation and sedimentation of primary α-Al(FeMn)Si phase in liquid Al-11.5Si-0.4Mg alloy10.1023/B:JMSC.0000019991.70334.5f ↗
19. M.M. Makhlouf, D. Apelian, Casting Characteristics of Aluminum Die Casting Alloys, http://metalcasting.govtools.us/reports/casting_characteristics_of_aluminum.pdf (accessed 05.02.02.).
20. Gravity segregation of complex intermetallic compounds in liquid aluminum-silicon alloys10.1007/BF02649097 ↗
21. Settling-out of Fe,Mn and Cr in Al-Si casting alloys
22. Understanding sludge
23. Iron-bearing compounds in Al-Si die-casting alloys: their morphology and conditions under which they form
24. Investigation of mechanical properties of intermetallic phases in multi-component Al-Si alloys using hot-stage nanoindentation10.1016/j.intermet.2009.09.013 ↗
25. Effect of iron-intermetallics on the fluidity of 413 aluminum alloy10.1016/j.jallcom.2008.01.079 ↗
26. Effects of Fe intermetallics on the machinability of heat-treated Al-(7-11)% Si alloys10.1016/j.jmatprotec.2009.09.007 ↗
27. Aluminum melting prob1ems and their influence on furnace Selection
28. Effect of superheat, cooling rate and impurities on the formation of iron intermetallics in Al-Si die casting alloys
29. Effect of melt superheating on convection-free precipitation and sedimentation of primary α-Fe phase in liquid al-11.5Si-0.4Mg alloy10.1080/13640461.2003.11819546 ↗
30. Nucleation of Fe-intermetallic phases in the Al-Si-Fe alloys10.1007/s11661-005-0295-9 ↗
31. In situ study of nucleation and growth of the irregular α-Al/β-Al5FeSi eutectic by 3-D synchrotron X-ray microtomography10.1016/j.actamat.2010.06.012 ↗
32. Die soldering: mechanism of the interface reaction between molten aluminum alloy and tool steel10.1007/s11663-002-0057-7 ↗
33. Standard EN 1706:2010 · 2010
34. Mechanical and microstructural characterization of diecast aluminium alloys
35. Montgomery · 2012
36. Doe applied to microstructural and mechanical properties of Al-Si-Cu-Mg casting alloys for automotive applications10.1016/j.msea.2010.02.029 ↗
37. Defect band characteristics in Mg-Al and Al-Si high-pressure die castings10.1007/s11661-007-9243-1 ↗
38. Effects of Si content on defect band formation in hypoeutectic Al-Si die castings10.1016/j.msea.2005.08.194 ↗
39. Microstructure formation in AlSi4MgMn and AlMg5Si2Mn high-pressure die castings10.1007/s11661-009-9841-1 ↗
40. Effects of chromium and bismuth on secondary aluminium foundry alloys10.1179/1743133613Y.0000000061 ↗
41. Formation of the surface layer in hypoeutectic Al-alloy high-pressure die castings10.1016/j.matchemphys.2011.06.035 ↗
42. Morphological studies on AlFeSi phase in AlSi7Mg alloy with trace additions of Be, Mn, Cr and Co10.1016/1044-5803(94)90072-8 ↗
43. Porter · 1992
44. Chemical inhomogeneity of intermetallic phases precipitates formed during solidification of Al-Si alloys10.1016/j.matchar.2004.10.001 ↗
45. Fabrizi · 2014 · 277
46. Si particle size and aspect ratio distributions in an Al-7%Si-0.6%Mg alloy during solution treatment10.1016/j.msea.2007.03.044 ↗
47. The influence of Sr, Mg and Cu addition on the microstructural properties of a secondary AlSi9Cu3(Fe) die casting alloy10.1016/j.matchar.2013.08.012 ↗
48. Quantification of iron in aluminium-silicon foundry alloys via thermal analysis10.1080/13640461.1997.11819228 ↗
49. Morphological variation of the Fe/Cr-containing intermetallic phase in the Al-Si casting alloy as a function of cooling rate: time-resolved radiography10.4028/www.scientific.net/MSF.654-656.974 ↗