Meta-halloysite to improve compactness in iron-rich laterite-based alkali activated materials
Source abstract
Abstract
Abstract In this paper, the results of the experimental investigation were used to understand the effect of fine meta-halloysite on the reactivity, mechanical and microstructural properties of laterite-based geopolymers. Laterite was replaced by 0, 20, 30 and 50 wt% of meta-halloysite in order to improve the physico-chemical performance. Meta-halloysite was prepared by calcination of natural halloysite at 600 °C. The moduli (molar ratio SiO2/Na2O) of the activating solutions were 1.04, 0.92, and 0.75 with H2O/Na2O = 9.78, 10.45 and 12.04, respectively. The results indicated that calcined laterite has a high specific surface area (43.00 ± 0.12 m2/g), notwithstanding a high average particle size (d50 = 45.20 μm) compared to meta-halloysite with a smaller average particle size (d50 = 8.40 μm) and a specific surface (29.80 ± 0.16 m2/g). The compressive strength of geopolymers increased upon the addition of meta-halloysite from 12 MPa to 45 MPa at 28 days. While the setting time and water absorption decrease with increase in the of meta-halloysite content as well as with increase in Si/Al, Si/Fe, Al/Fe and Na/Al molar ratios used in the synthesis of geopolymers. The use of fine meta-halloysite resulted in better efficiency and improved mechanical performance of synthesized products.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Clay minerals and soil interactions · Grouting, Rheology, and Soil Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Davidovits · 2015
2. Alkaline activation of metakaolin-fly ash mixtures: obtain of zeoceramics and zeocements10.1016/j.micromeso.2007.03.024 ↗
3. Dilatometry of geopolymers as a means of selecting desirable fly ash sources10.1016/j.jnoncrysol.2012.06.001 ↗
4. Enhanced thermal stability in K2O-Metakaolin-Based geopolymer concretes by Al2O3 and SiO2 fillers Addition.201010.1007/s10853-009-4108-1 ↗
5. Utilization of volcanic ashes for the production of geopolymers cured at ambient temperature10.1016/j.cemconcomp.2013.03.010 ↗
6. Effect of iron phase on the strengthening of lateritic-based “geomimetic” materials10.1016/j.clay.2012.09.014 ↗
7. Influence of the chemical and mineralogical composition on the reactivity of volcanic ashes during alkali activation10.1016/j.ceramint.2013.06.072 ↗
8. Understanding the strengthening of a lateritic ‘‘geomimetic’’ material10.1016/j.conbuildmat.2014.01.064 ↗
9. Cement and concrete research inorganic polymers from laterite using activation with phosphoric acid and alkaline sodium silicate solution: mechanical and microstructural properties10.1016/j.cemconres.2014.08.010 ↗
10. The corrosion of kaolinite by iron minerals and the effects on geopolymerization10.1016/j.clay.2016.12.040 ↗
11. Performance characteristics of lateritic soil bricks fired at low temperatures: a case study of Cameroon10.1016/S0950-0618(00)00024-6 ↗
12. Laterite based stabilized products for sustainable building applications in tropical countries: review and prospects for the case of Cameroon10.3390/su3010293 ↗
13. Effect of silicate modulus on the setting, mechanical strength and microstructure of iron-rich aluminosilicate (laterite) based-geopolymer cured at room temperature10.1016/j.ceramint.2018.08.205 ↗
14. Characterization of a lateritic geomaterial and its elaboration through a chemical route. 200910.1016/j.conbuildmat.2008.06.009 ↗
15. Induration of laterites in the tropical areas. Assessment for potential structural applications
16. A sustainable approach for the geopolymerization of natural iron-rich aluminosilicate materials10.3390/su6095535 ↗
17. Strength behavior and microstructural characteristics of tropical laterite soil treated with sodium silicate-based liquid stabilizer10.1007/s12665-013-2939-1 ↗
18. Effect of slag and calcium carbonate addition on the development of geopolymer from indurated laterite10.1016/j.clay.2017.08.015 ↗
19. Microstructure and engineering properties of Fe2O3(FeO)-Al2O3-SiO2 based geopolymer composites10.1016/j.jclepro.2018.07.171 ↗
20. The effect of meta-halloysite on alkali–aggregate reaction in concrete10.1617/s11527-017-1084-9 ↗
21. Effects of halloysite in kaolin on the formation and properties of geopolymers10.1016/j.cemconcomp.2012.02.003 ↗
22. Optimization of geopolymer properties by coating of fly-ash microparticles with nanoclays10.1007/s10904-014-0105-1 ↗
23. The clay minerals halloysite and meta-halloysite10.1038/157225b0 ↗
24. The nomenclature of the halloysite minerals
25. Formation of aluminosilicate geopolymers from 1:1 layer-lattice minerals pre-treated by various methods: a comparative study10.1007/s10853-006-0173-x ↗
26. Characterization of zeolite in zeolite-geopolymer hybrid bulk materials derived from kaolinitic clays10.3390/ma6051767 ↗
27. Compressive strength of geopolymers while varying the raw materials
28. Strength and microstructure of water treatment residue-based geopolymers containing heavy metals10.1016/j.conbuildmat.2013.08.047 ↗
29. Halloysite and kaolinite: two clay minerals with geological and technological importance
30. Synthesis and properties of inorganic polymers (geopolymers) derived from Cameroon-meta-halloysite10.1016/j.ceramint.2018.07.070 ↗
31. Alkali activation of fly ashes. Part I. Effect of curing condition on the carbonation of reaction products10.1016/j.fuel.2005.03.030 ↗
32. Composition design and microstructural characterization of calcined kaolin-based geopolymer cement10.1016/j.clay.2009.11.002 ↗
33. Inorganic polymers made of fayalite slag: on the microstructure and behavior of Fe
34. Low-temperature synthesized aluminosilicate glasses .3. Influence of the composition of the silicate solution on production, structure and properties10.1023/A:1018563914630 ↗
35. Influence of gibbsite and quartz in kaolin on the properties of metakaolin-based geopolymer cements10.1016/j.clay.2015.01.023 ↗
36. Dissolved carbon dioxide in basaltic glasses: concentrations and speciation10.1016/0012-821X(86)90078-6 ↗
37. Properties of geopolymer with seeded fly ash and rice husk bark ash10.1016/j.msea.2011.06.027 ↗
38. Gel composition and strength properties of alkali-activated oyster shell-volcanic ash: effect of synthesis conditions
39. Low-temperature reaction stoichiometry and structure of a model compound10.1007/BF00355129 ↗
40. Quantitative kinetic and structural analysis of geopolymers. Part 1. The activation of metakaolin with sodium hydroxide10.1016/j.tca.2012.03.021 ↗
41. Peys · 2018
42. Durability of alkali-activated binders: a clear advantage over Portland cement or an unproven issue?10.1016/j.conbuildmat.2011.12.017 ↗
43. Effect of fly ash preliminary calcination on the properties of geopolymer10.1016/j.jhazmat.2008.08.065 ↗
44. Influence of fine aggregates on the microstructure, porosity and chemico-mechanical stability of inorganic polymer concretes10.1016/j.conbuildmat.2015.08.090 ↗
45. Effect of activator mix on the hydration and strength behaviour of alkali-activated slag cements10.1680/adcr.2003.15.3.129 ↗
46. Synthesis of fly ash based geopolymer mortar considering different concentrations and combinations of alkaline activator solution
47. Synthesis and characterization of red mud and rice husk ash-based geopolymer composites10.1016/j.cemconcomp.2012.11.010 ↗