Analyses of permeation characteristics of hydrogen in nitrile butadiene rubber using gas chromatography
Source abstract
Abstract
Abstract Permeation of hydrogen gas (H2) into nitrile butadiene rubber (NBR), which is one of the strong candidates for sealing material in H2 energy infrastructures, was quantified using a gas chromatography (GC) and a self-developed diffusion-analysis program. NBR samples were charged with H2 in a high-pressure chamber for 24 h then decompressed into atmosphere, and the mass of H2 released from the sample was measured as a function of elapsed time after decompression. The developed program calculated the total charging amount C0 and diffusivity D, which were then used to calculate the H2 solubility S and permeability P for variation of pressure. The samples were polymerized with and without carbon black (CB) filler in cylindrical shapes with different diameters. It appeared that the filler contributes to increase S and decrease D. The uncertainty analysis against the evaluated data was carried out, too, in order that the method could be applicable as a standard test for the permeation properties of various polymer membranes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Membrane Separation and Gas Transport · Fuel Cells and Related Materials · Polymer crystallization and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Pehlivan-Davis · 2015
2. (2016), pressure vessels and piping division
3. Marchi · 2008
4. Penetrated hydrogen content and volume inflation in unfilled NBR exposed to high-pressure hydrogen–What are the characteristics of unfilled-NBR dominating them?10.1016/j.ijhydene.2018.08.031 ↗
5. Freudenberg
6. Compatibility and thermal stability of EPDM–NBR elastomer blends10.1177/0095244305050004 ↗
7. H2FC hydrogen and fuel cells program sand2017-9726C hamburg
8. The effect of fillers on the permeability of rubber to gases10.5254/1.3542844 ↗
9. The diffusion of hydrogen and helium through silica glass and other glasses10.1021/ja01431a010 ↗
10. Sealing performance analysis of rubber O-ring in high-pressure gaseous hydrogen based on finite element method10.1016/j.ijhydene.2017.03.039 ↗
11. Evaluation on high-pressure hydrogen decompression failure of rubber O-ring using design of experiments10.20485/jsaeijae.2.4_123 ↗
12. Barth · 2013
13. Degradation behavior of acrylonitrile butadiene rubber after cyclic high-pressure hydrogen exposure10.1016/j.ijhydene.2014.11.106 ↗
14. Nishimura · 2017
15. Sorption and transport of methanol in poly(ethylene terphthalate)10.1016/j.polymer.2008.10.031 ↗
16. Measurements of sorption isotherms and diffusion coefficients by means of a magnetic suspension balance10.1016/S0255-2701(03)00077-1 ↗
17. Measurement of CO2 solubility and diffusivity in poly (1-lactide) and poly (d, 1-lactide-co-glycolide) by magnetic suspension balance10.1016/j.supflu.2008.07.011 ↗
18. 2001
19. Gas transport in glassy polymers: prediction of diffusional time lag10.3390/membranes8010008 ↗
20. Gas transport properties of MgO filled poly(1-trimethylsilyl-1-propyne) nanocomposites10.1016/j.polymer.2008.01.004 ↗
21. ASTM International (ASTM)
22. 2002
23. Barrer · 1968 · 165
24. Barth · 2004
25. Joint Committee for Guides in Metrology · 2008
26. Influence of fillers on hydrogen penetration properties and blister fracture of rubber composites for O-ring exposed to high-pressure hydrogen gas10.1016/j.ijhydene.2008.11.105 ↗
27. Permeability and diffusion data
28. Diffusion of hydrogen in mild steel10.1016/0001-6160(54)90162-5 ↗
29. Solutions to Fick's second law of diffusion with a sinusoidal excitation10.1016/S0167-2738(98)00103-9 ↗
30. Compilation of Henry's law constants (version 4.0) for water as solvent10.5194/acp-15-4399-2015 ↗
31. Gas permeability, diffusivity, solubility, and aging characteristics of 6FDA-durene polyimide membranes
32. Layer-by-layer assembly of layered double hydroxide/rubber multilayer films with excellent gas barrier property10.1016/j.compositesa.2017.07.014 ↗
33. American National Standard. Test methods for evaluating material compatibility in compressed hydrogen applications-polymers
34. Chapter 8 - gas chromatography and gas chromatography—mass spectrometry
35. Pavia · 2006