journal article·2022-03

Effects of inorganic salts in the casting solution on morphology of poly(vinyl chloride)/bentonite ultrafiltration membranes

Tausif Ahmad, Chandan Guria, Shashank Shekhar

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Membrane Separation Technologies · Membrane Separation and Gas Transport · Surface Modification and Superhydrophobicity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (80)

Show source-provided references
1. Synthesis, characterization and performance studies of mixed-matrix poly(vinyl chloride)-bentonite ultrafiltration membrane for the treatment of saline oily wastewater10.1016/j.psep.2018.03.033 ↗
2. Preparation and characterization of functionalized poly(vinyl chloride) membranes for selective separation of perchlorate from water10.1016/j.memsci.2014.10.054 ↗
3. Zwitterionic ultrafiltration membranes for as (V) rejection10.1016/j.cej.2016.09.096 ↗
4. Synthesis and characterization of novel sulfanilic acid–polyvinyl chloride–polysulfone blend membranes for metal ion rejection10.1039/C6RA02590K ↗
5. Poly(N,N-dimethylaminoethyl methacrylate) grafted poly(vinyl chloride)s synthesized via ATRP process and their membranes for dye separation10.1007/s10118-015-1701-4 ↗
6. Preparation and performance of poly (vinyl chloride)/aminated poly (vinyl chloride) blend ultrafiltration membranes10.1080/19443994.2016.1162445 ↗
7. Sea water demineralization by means of an osmotic membranes
8. Influence of additives on the morphology of PVDF membranes based on phase diagram: thermodynamic and experimental study10.1002/app.46225 ↗
9. Microstructures in phase inversion membranes10.1016/0376-7388(92)80135-7 ↗
10. The role of the nature of the casting substrate on the properties of membranes prepared via immersion precipitation10.1016/j.memsci.2006.06.039 ↗
11. Toward the next generation of sustainable membranes from green chemistry principles10.1021/acssuschemeng.0c07119 ↗
12. Aqueous quenched asymmetric polysulfone membranes prepared by dry/wet phase separation10.1016/0376-7388(93)85032-R ↗
13. Kinetic modeling and simulation of non-solvent induced phase separation: immersion precipitation of PVC-based casting solution in a finite salt coagulation bath10.1016/j.polymer.2020.122527 ↗
14. Progress in the modification of polyvinyl chloride (PVC) membranes: a performance review for wastewater treatment
15. A model for wet-casting polymeric membranes incorporating nonequilibrium interfacial dynamics, vitrification and convection10.1016/j.memsci.2010.02.066 ↗
16. Mulder · 1996
17. A diffusion-controlled model for wet-casting membrane formation10.1016/S0376-7388(00)81181-3 ↗
18. Investigation of submerged membrane photocatalytic reactor (sMPR) operating parameters during oily wastewater treatment process10.1016/j.desal.2014.09.008 ↗
19. High performance of polysulfone ultrafiltration membrane: effect of polymer concentration
20. Enhanced permeation and antifouling performance of polyvinyl chloride (PVC) blend Pluronic F127 ultrafiltration membrane by using salt coagulation bath (SCB)10.1016/j.memsci.2017.11.003 ↗
21. Enhanced performance of salt-induced Pluronic F127 and bentonite blended polyvinyl chloride ultrafiltration membrane for the processing of oilfield produced water
22. Optimal synthesis of high fouling-resistant PVC-based ultrafiltration membranes with tunable surface pore size distribution and ultralow water contact angle for the treatment of oily wastewater10.1016/j.seppur.2020.117829 ↗
23. Preparation, structural and functional characterization of modified porous PVDF membranes by γ-irradiation10.1016/j.memsci.2011.10.019 ↗
24. The role of the surfactant sodium dodecyl sulfate to dynamically reduce mass transfer resistance of SPEEK coated membrane for oil-in-water emulsion treatment10.1016/j.memsci.2017.06.079 ↗
25. Ultra-wetting graphene-based PES ultrafiltration membrane – a novel approach for successful oil-water separation10.1016/j.watres.2016.07.042 ↗
26. Optimal synthesis and operation of low-cost polyvinyl chloride/bentonite ultrafiltration membranes for the purification of oilfield produced water10.1016/j.memsci.2018.07.093 ↗
27. Alkaline-induced superhydrophilic/underwater superoleophobic polyacrylonitrile membranes with ultralow oil-adhesion for high-efficient oil/water separation10.1016/j.memsci.2016.04.020 ↗
28. A review of oily wastewater treatment using ultrafiltration membrane : a parametric study to enhance the membrane performance
29. Synthesis, characterization and performance studies of polysulfone/bentonite nanoparticles mixed-matrix ultra-filtration membranes using oil field produced water10.1016/j.seppur.2015.06.029 ↗
30. Optimal synthesis, characterization and antifouling performance of Pluronic F127/bentonite-based super-hydrophilic polyvinyl chloride ultrafiltration membrane for enhanced oilfield produced water treatment10.1016/j.jiec.2020.06.023 ↗
31. Critical review of montmorillonite/polymer mixed-matrix filtration membranes: possibilities and challenges10.1016/j.clay.2018.10.016 ↗
32. Effect of non-solvent additives on the morphology, pore structure, and direct contact membrane distillation performance of PVDF-CTFE hydrophobic membranes10.1016/j.jes.2015.09.023 ↗
33. The effect of ZnCl2on the formation of polysulfone membrane10.1016/0376-7388(96)00113-5 ↗
34. Effect of ZnCl2 on formation of asymmetric PEI membrane by phase inversion process
35. Polyethersulfone/poly(acrylic acid)/calcium chloride composite membranes for improved dye removal
36. Improvement of the water purification capability of poly(acrylonitrile) ultrafiltration membranes10.1016/S0376-7388(99)00100-3 ↗
37. Rational design of phase inversion membranes by tailoring thermodynamics and kinetics of casting solution using polymer additives10.1016/j.memsci.2013.04.009 ↗
38. Polyaniline doped ultrafiltration membranes: mechanism of membrane formation and pH response characteristics10.1016/j.polymer.2018.08.032 ↗
39. Role of thermodynamic and kinetic interaction of poly(vinylidene fluoride) with various solvents for tuning phase inversion membranes10.1002/pen.24666 ↗
40. Theoretical phase diagram calculation and membrane morphology evaluation for water/solvent/polyethersulfone systems10.1016/j.polymer.2007.01.049 ↗
41. Thermodynamic study of a water–dimethylformamide–polyacrylonitrile ternary system10.1002/app.28392 ↗
42. Calculation of liquid-liquid phase separation in a ternary system of a polymer in a mixture of a solvent and a nonsolvent10.1021/ma00234a008 ↗
43. Calculation of alcohol-acetone-cellulose acetate ternary
44. Demixing and gelation behavior of ternary cellulose acetate solutions10.1002/polb.1986.090240406 ↗
45. Analysis of nonsolvent–solvent–polymer phase diagrams and their relevance to membrane formation modeling10.1002/app.1986.070310404 ↗
46. Mathematical calculation of binodal curves of a polymer/solvent/nonsolvent system in the phase inversion process10.1016/j.desal.2005.07.035 ↗
47. Correlation between macrovoid formation and the ternary phase diagram for polyethersulfone membranes prepared from two nearly similar solvents10.1016/j.memsci.2008.07.003 ↗
48. The formation of microporous polyvinylidene difluoride membranes by phase separation10.1016/S0376-7388(00)81159-X ↗
49. Liquid – liquid phase separation in polysulfone/solvent/water systems10.1002/(SICI)1097-4628(19970926)65:13<2643::AID-APP6>3.0.CO;2-B ↗
50. Thermodynamic modeling of PES/CA blend membrane preparation thermodynamic modeling of PES/CA blend membrane preparation
51. Flory-huggins based model to determine thermodynamic property of polymeric membrane solution10.1088/1742-6596/1090/1/012074 ↗
52. Quaternary polymeric thermodynamic system and membrane formation mathematical model
53. The role of thermodynamic parameter on membrane morphology based on phase diagram10.1016/j.molliq.2016.10.042 ↗
54. Morphological changes in asymmetric PES membranes by addition of polyurethanes: a thermodynamic and experimental study10.1016/j.molliq.2018.03.026 ↗
55. Modeling of solution thermodynamics: a method for tuning the properties of blend polymeric membranes10.1016/j.memsci.2017.06.049 ↗
56. Preparation and surface modification of PVC/SBR heterogeneous cation exchange membrane with silver nanoparticles by plasma treatment10.1016/j.memsci.2010.09.043 ↗
57. Poly(vinyl chloride) (PVC) hollow fiber ultrafiltration membranes prepared from PVC/Additives/Solvent10.1016/S0376-7388(02)00261-2 ↗
58. Fe2O3nanocomposite PVC membrane with enhanced properties and separation performance10.1016/j.memsci.2017.01.051 ↗
59. The formation mechanism of phase inversion membranes10.1016/S0011-9164(00)88244-2 ↗
60. Trade-off between thermodynamic enhancement and kinetic hindrance during phase inversion in the preparation of polysulfone membranes10.1016/S0011-9164(03)90081-6 ↗
61. Diffusion-controlled formation of porous structures in ternary polymer systems10.1002/pol.1979.180170312 ↗
62. Thermodynamics of heterogeneous polymers and their solutions10.1063/1.1723887 ↗
63. Phase relationships in polymer solutions10.1039/tf9494501142 ↗
64. Equilibrium thermodynamics of a quaternary membrane-forming system with two polymers. 1. Calculations10.1021/ma00086a009 ↗
65. Asymmetric membranes based on poly(vinyl chloride): effect of molecular weight of additive and solvent power on the morphology and performance10.1007/s10853-017-0807-1 ↗
66. Phase behavior and morphological studies of polyimide PVP/solvent/water systems by phase inversion10.1002/app.1804 ↗
67. Improved particle size distribution measurements using multiangle dynamic light scattering10.1021/la00007a028 ↗
68. A study of the effect of embedding ZnO-NPs on PVC membrane performance use in actual hospital wastewater treatment by membrane bioreactor10.1016/j.cep.2018.06.019 ↗
69. Using the green solvent dimethyl sulfoxide to replace traditional solvents partly and fabricating PVC/PVC-g-PEGMA blended ultrafiltration membranes with high permeability and rejection10.1021/acs.iecr.9b00370 ↗
70. Effect of TiO2nanoparticles on the surface morphology and performance of microporous PES membrane10.1016/j.apsusc.2008.07.139 ↗
71. Young- dupre revisited10.1021/la00009a049 ↗
72. Phase diagrams calculated for sheared ternary polymer blends10.1016/S0032-3861(96)01076-2 ↗
73. Chapra · 2005
74. Design and creation of superwetting/antiwetting surfaces10.1002/adma.200501961 ↗
75. Caenn · 2017
76. Membrane characterization by solute transport and atomic force microscopy10.1016/S0376-7388(97)00329-3 ↗
77. 1986 · 463
78. Surface modification of water purification membranes10.1002/anie.201601509 ↗
79. Influence of membrane surface properties on initial rate of colloidal fouling of reverse osmosis and nanofiltration membranes10.1016/S0376-7388(01)00376-3 ↗
80. Fouling of reverse osmosis membranes by biopolymers in wastewater secondary effluent: role of membrane surface properties and initial permeate flux10.1016/j.memsci.2006.12.027 ↗